Determination of Thallium in a Flow System by Anodic Stripping Voltammetry at a Bismuth Film Electrode

Integrated three-electrode screen-printed sensor modified with bismuth film for voltammetric determination of thallium(I) at the ultratrace level

In the present paper, for the first time, the integrated three-electrode screen-printed sensor with in situ plated bismuth film carbon working electrode was applied for the ultratrace determination of thallium(I) (Tl(I)). Under optimized conditions extremely low limits of detection were reached, 8.47 × 10^-10 and 6.71 × 10^-12 mol L^-1 for the deposition times of 60 s and 300 s, respectively. The influences of foreign metal ions and surfactants on the voltammetric signal of thallium in natural samples were minimized using 1 × 10^-5 mol L^-1 EDTA and Amberlite XAD-7 resin added to the buffer solution (CH₃COONH₄, CH₃COOH and NH₄Cl) of pH = 4.6 ± 0.1. The developed voltammetric method with integrated three-electrode screen-printed sensor was validated with use of certified reference materials (surface, rain and natural water) and can be in future applied to field analyses of Tl(I).

Electrode Modified by Reduced Graphene Oxide for Monitoring of Total Thallium in Grain Products

Grain products and the associated industry have a notable economic and social impact all over the world. The toxicological safety of grain products is a nutritional prerogative. This study focused on the determination of thallium content in grain product samples collected from a commercial brand commonly available in Poland. The samples were analyzed with the use of differential pulse anodic stripping voltammetry (DPASV) with graphene oxide based on glassy carbon. The stripping anodic peak current of thallium was linear over its concentration range from 9.78 × 10⁻⁹ to 97.8 × 10⁻⁹ M. The limit of detection (LOD) was calculated according to the formula LOD = (κ × SDa)/b, where κ is 3.3, SDa is the standard deviation of the intercept, and b is the slope. The determined value of LOD was 1.229 µg L⁻¹ (6.01 × 10⁻⁹ M). The proposed method was successfully applied for the determination of thallium ions in samples of actual grain products. The obtained results confirmed that thallium was present in the studied cereal samples (average content at 0.0268 ± 0.0798 mg/kg). Thallium has a half-life of 60 days; therefore, the consumption of foods with thallium content of approximately 0.08 mg/kg has the potential for harmful bioaccumulation in the body. Thallium contamination in cereal products should be a critical parameter for health environmental regulations.