Determination of the Apparent Michaelis Constant of Glucose Oxidase Immobilized on a Microelectrode with Respect to Oxygen

Poly(9H-carbazole) as a Organic Semiconductor for Enzymatic and Non-Enzymatic Glucose Sensors

Organic semiconductors and conducting polymers are the most promising next-generation conducting materials for electrochemical biosensors as the greener and cheaper alternative for electrodes based on transition metals or their oxides. Therefore, polycarbazole as the organic semiconducting polymer was electrochemically synthesized and deposited on working electrode. Structure and semiconducting properties of polycarbazole have theoretically and experimentally been analyzed and proved. For these electrochemical systems, a maximal sensitivity of 14 μA·cm-2·mM-1, a wide linear range of detection up to 5 mM, and a minimal limit of detection of around 0.2 mM were achieved. Moreover, Michaelis's constant of these sensors depends not only on the enzyme but on the material of electrode and applied potential. The electrocatalytic mechanism and performance of the non- and enzymatic sensors based on this material as a conducting layer have been discussed by estimating pseudocapacitive and faradaic currents and by adding glucose as an analyte at the different applied potentials. In this work, the attention was focused on the electrochemical origin and mechanism involved in the non- and enzymatic oxidation and reduction of glucose.

Nanostrip flexible microwave enzymatic biosensor for noninvasive epidermal glucose sensing

Microwave sensors based on microstrip antennas are promising as wearable devices because of their flexibility and wireless communication compatibility. However, their sensitivity is limited due to the reduced sensor size and the potential of biochemical monitoring needs to be explored. In this work, we present a new concept to enhance the microwave signals using nanostrip-based metamaterials. The introduction of the nanostrip structures was achieved by theory and simulations. Experiments prove their enhancement of the electric field and sensing response in the characteristic gigahertz (GHz) wave band. Ordered nanostrips were fabricated on a plastic substrate through a simple nanoscale printing approach. Glucose oxidase is directly doped into the nanostrips, which enables a flexible wearable enzymatic biosensor for glucose sensing. Sensing experiments demonstrated that the nanostrip biosensor gives excellent performance for glucose detection, including high sensitivity, fast response, low detection limit, high affinity, and low power consumption. The applicability of the nanostrip-based sensor as a wearable epidermal device for real-time noninvasive monitoring of glucose in sweat is verified as well.