Enhanced Electroanalytical Sensitivity via Interface Miniaturisation: Ion Transfer Voltammetry at an Array of Nanometre Liquid-Liquid Interfaces

Modulating the ion-transfer electrochemistry of perfluorooctanoate with serum albumin and β-cyclodextrin

Per- and polyfluoroalkyl substances (PFAS) are durable synthetic pollutants that persist in the environment and resist biodegradation. Ion-transfer electrochemistry at aqueous-organic interfaces is a simple strategy for the detection of ionised PFAS. Herein, we investigate the modulation of the ion transfer voltammetry of perfluorooctanoate (PFOA) at liquid-liquid micro-interface arrays by aqueous phase bovine serum albumin (BSA) or β-cyclodextrin (β-CD) and examine the determination of association constants for these binding interactions. By tracking the ion transfer current due to ionised, uncomplexed PFOA as a function of BSA or β-CD concentration, titration curves are produced. Fitting of a binding isotherm to these data provides the association constants. The association constant of PFOA with the BSA determined in this way was ca. 105 M-1 assuming a 1 : 1 binding. Likewise, the association constant for PFOA with β-CD was ca. 104 M-1 for a 1 : 1 β-CD-PFOA complex. Finally, the simultaneous effect of both BSA and β-CD on the ion transfer voltammetry of PFOA was studied, showing clearly that PFOA bound to BSA is released (de-complexed) upon addition of β-CD. The results presented here show ion transfer voltammetry as a simple strategy for the study of molecular and biomolecular binding of ionised PFAS and is potentially useful in understanding the affinity of different PFAS with aqueous phase binding agents such as proteins and carbohydrates.

Nitrazepam and 7-aminonitrazepam studied at the macroscopic and microscopic electrified liquid-liquid interface

Two benzodiazepine type drugs, that is, nitrazepam and 7-aminonitrazepam, were studied at the electrified liquid-liquid interface (eLLI). Both drugs are illicit and act sedative in the human body and moreover are used as date rape drugs. Existence of the diazepine ring in the concerned chemicals structure and one additional amine group (for 7-aminonitrazepam) allows for the molecular charging below their pKa values, and hence, both drugs can cross the eLLI interface upon application of the appropriate value of the Galvani potential difference. Chosen molecules were studied at the macroscopic eLLI formed in the four electrode cell and microscopic eLLI formed within a microtip defined as the single pore having 25 μm in diameter. Microscopic eLLI was formed using only a few μL of the organic and the aqueous phase with the help of a 3D printed cell. Parameters such as limit of detection and voltammetric detection sensitivity are derived from the experimental data. Developed methodology was used to detect nitrazepam in pharmaceutical formulation and both drugs (nitrazepam and 7-aminonitrazepam) in spiked biological fluids (urine and blood).

Detection of Pseudomonas aeruginosa quorum sensing molecules at an electrified liquid|liquid micro-interface through facilitated proton transfer

Miniaturization of electrochemical detection methods for point-of-care-devices is ideal for their integration and use within healthcare environments. Simultaneously, the prolific pathogenic bacteria Pseudomonas aeruginosa poses a serious health risk to patients with compromised immune systems. Recognizing these two factors, a proof-of-concept electrochemical method employing a micro-interface between water and oil (w/o) held at the tip of a pulled borosilicate glass capillary is presented. This method targets small molecules produced by P. aeruginosa colonies as signalling factors that control colony growth in a pseudo-multicellular process known as quorum sensing (QS). The QS molecules of interest are 4-hydroxy-2-heptylquinoline (HHQ) and 2-heptyl-3,4-dihydroxyquinoline (PQS, Pseudomonas quinolone signal). Hydrophobic HHQ and PQS molecules, dissolved in the oil phase, were observed electrochemically to facilitate proton transfer across the w/o interface. This interfacial complexation can be exploited as a facile electrochemical detection method for P. aeruginosa and is advantageous as it does not depend on the redox activity of HHQ/PQS. Interestingly, the limit-of-linearity is reached as [H+] ≈ [ligand]. Density functional theory calculations were performed to determine the proton affinities and gas-phase basicities of HHQ/PQS, as well as elucidate the likely site of stepwise protonation within each molecule.

Ion Transfer Voltammetry with an Electrochemical Pen

We present a new electrochemical system that combines paper-based sensing and ion-transfer voltammetry, bringing the latter a step closer toward point-of-care applications. Studies at the interface between two immiscible electrolyte solutions (ITIES) are often performed to detect redox-inactive species; unfortunately, due to the inherent instability of the interface, it is rather poorly explored outside specialized laboratories. Here, we address this limitation by combining a pen-like device containing the gelled organic phase with a paper-supported aqueous phase. This combination makes the system more user-friendly, potentially low-cost, and easy to assemble. We show the applicability of the new cell to analyze both simple and ionophore-facilitated transfer of ions and proteins, preconcentration of species, and analysis of mixtures through combination with paper chromatography. The native ion content of the paper also enabled measurements without added electrolytes. Those studies could broaden the scope for the application of the label-free electrochemical detection of nonredox-active species at points-of-need.

Quantitative Analysis of Redox-Inactive Ions by AC Voltammetry at a Polarized Interface between Two Immiscible Electrolyte Solutions

The interface between two immiscible electrolyte solutions (ITIES) is ideally suited to detect redox-inactive ions by their ion transfer. Such electroanalysis, based on the Nernst-Donnan equation, has been predominantly performed using amperometry, cyclic voltammetry, or differential pulse voltammetry. Here, we introduce a new electroanalytical method based on alternating-current (AC) voltammetry with inherent advantages over traditional approaches such as avoidance of positive feedback iR compensation, a major issue for liquid|liquid electrochemical cells containing resistive organic media and interfacial areas in the cm² and mm² range. A theoretical background outlining the generation of the analytical signal is provided and based on extracting the component that depends on the Warburg impedance from the total impedance. The quantitative detection of a series of model redox-inactive tetraalkylammonium cations is demonstrated, with evidence provided of the transient adsorption of these cations at the interface during the course of ion transfer. Since ion transfer is diffusion-limited, by changing the voltage excitation frequency during AC voltammetry, the intensity of the Faradaic response can be enhanced at low frequencies (1 Hz) or made to disappear completely at higher frequencies (99 Hz). The latter produces an AC voltammogram equivalent to a "blank" measurement in the absence of analyte and is ideal for background subtraction. Therefore, major opportunities exist for the sensitive detection of ionic analyte when a "blank" measurement in the absence of analyte is impossible. This approach is particularly useful to deconvolute signals related to reversible electrochemical reactions from those due to irreversible processes, which do not give AC signals.

Electrified Soft Interface as a Selective Sensor for Cocaine Detection in Street Samples

A straightforward, direct, and selective method is presented for electrochemical cocaine identification in street samples. The sensing mechanism is based on a simple ion transfer reaction across the polarized liquid–liquid interface. The interfacial behavior of a number of cutting agents is also reported. Interfacial miniaturization has led to improved electroanalytical properties of the liquid–liquid interface based sensor as compared with the macroscopic analogue. The reported method holds great potential to replace colorimetric tests with poor selectivity for on-site street sample analysis.

Portable Sensor for the Detection of Choline and Its Derivatives Based on Silica Isoporous Membrane and Gellified Nanointerfaces

A portable amperometric ion sensor was fabricated by integrating silica isoporous membrane (SIM) and organogel composed of polyvinyl chloride and 1,2-dichloroethane (PVC-DCE) on a 3D-printed polymer chip. The detection of ionic species in aqueous samples could be accomplished by adding a microliter of sample droplet to the sensor and by identifying the ion-transfer potential and current magnitude at the water/organogel interface array templated by SIM. Thanks to the ultrasmall channel size (2-3 nm in diameter), high channel density (4 × 10⁸ μm^-2), and ultrathin thickness (80 nm) of SIM, the ensemble of nanoscopic water/organogel (nano-W/Gel) interface array behaved like a microinterface with two back-to-back hemispherical mass diffusion zones. So, the heterogeneous ion-transfer across the nano-W/Gel interface array generated a steady-state sigmoidal current wave. The detection of choline (Ch) and its derivatives, including acetylcholine (ACh), benzoylcholine (BCh), and atropine (AP), in aqueous samples was examined with this portable sensor. Using differential pulse stripping voltammetry (DPSV), the quantification of these analytes was achieved with a limit of detection (LOD) down to 1 μM. Moreover, the portable ion sensor was insensitive to various potential interferents that might coexist in vivo, owing to size-/charge-based selectivity and antifouling capacity of SIM. With this priority, the portable ion sensor was able to quantitatively determine Ch and its derivatives in diluted urine and blood samples. The LODs for Ch, ACh, AP, and BCh in urine were 1.12, 1.30, 1.08, and 0.99 μM, and those for blood samples were 3.61, 3.38, 2.32, and 1.81 μM, respectively.

Detection of Metoprolol in Human Biofluids and Pharmaceuticals via Ion-Transfer Voltammetry at the Nanoscopic Liquid/Liquid Interface Array

Metoprolol (MTP) is one of the most widely used antihypertensive drugs yet banned to use in sport competition. Therefore, there has been an increasing demand for developing simple, rapid, and sensitive methods suited to the identification and quantification of MTP in human biofluids. In this work, ultrathin silica nanochannel membrane (SNM) with perforated channels was employed to support nanoscale liquid/liquid interface (nano-ITIES) array for investigation of the ion-transfer voltammetric behavior of MTP and for its detection in multiple human biofluids and pharmaceutical formulation. Several potential interfering substances, including small molecules, d-glucose, urea, ascorbic acid, glycine, magnesium chloride, sodium sulfate and large molecules, bovine serum albumin (BSA), were chosen as models of biological interferences to examine their influence on the ion-transfer current signal of MTP. The results confirmed that the steady-state current wave barely changed in the presence of small molecules. Although BSA displayed an apparent blockade on the transfer of MTP, the accurate determination of MTP in multiple human biofluids (i.e., urine, serum and whole blood) and pharmaceutical formulation were still feasible, thanks to the molecular sieving and antifouling abilities of SNM. A limit of detection (LOD) within the physiological level of MTP during therapy could be achieved for all cases, i.e., 0.5 and 1.1 μM for 100 times diluted urine and serum, respectively, and 2.2 μM for 1000 times diluted blood samples. These results demonstrated that the nano-ITIES array behaved as a simplified and integrated detection platform for ionizable drug analysis in complex media.

Electroanalytical Ventures at Nanoscale Interfaces Between Immiscible Liquids

Ion transfer at the interface between immiscible electrolyte solutions offers many benefits to analytical chemistry, including the ability to detect nonredox active ionized analytes, to detect ions whose redox electrochemistry is accompanied by complications, and to separate ions based on electrocontrolled partition. Nanoscale miniaturization of such interfaces brings the benefits of enhanced mass transport, which in turn leads to improved analytical performance in areas such as sensitivity and limits of detection. This review discusses the development of such nanoscale interfaces between immiscible liquids and examines the analytical advances that have been made to date, including prospects for trace detection of ion concentrations.

Amperometric Ion Sensing Approaches at Liquid/Liquid Interfaces for Inorganic, Organic and Biological Ions

Electrochemistry at the interface between two immiscible electrolyte solutions (ITIES) has become an invaluable tool for the selective and sensitive detection of cationic and anionic species, including charged drug molecules and proteins. In addition, neutral molecules can also be detected at the ITIES via enzymatic reactions. This chapter highlights recent developments towards creating a wide spectrum of sensing platforms involving ion transfer across the ITIES. As well as outlining the basic principles needed for performing these sensing applications, the development of ITIES-based detection strategies for inorganic, organic, and biological ions is discussed.

Recent developments in electrochemistry at the interface between two immiscible electrolyte solutions for ion sensing

The most recent developments on electrochemical sensing of ions at the liquid–liquid interface are reviewed here.