Electrochemical Determination of Norepinephrine on Cathodically Pretreated Poly(1,5-diaminonaphthalene) Modified Electrode

Electrochemical Determination of Norepinephrine at Poly (p-aminobenzenesulfonic Acid) Modified Sensor

Objective:

In this study, it was aimed to prepare an electrochemical sensor capable of assigning Norepinephrine in the presence of an interference such as ascorbic acid.

Methods:

A sensitive modified sensor was prepared by electrodeposition of p-aminobenzenesulfonic acid (p-ABSA) to the glassy carbon electrode by cyclic voltammetry. The electrooxidation of Norepinephrine was accomplished by cyclic and differential pulse voltammetry.

Results:

The current values were enhanced and the peak potentials of Norepinephrine and ascorbic acid were separated at the sensor compared to the bare electrode. There was linearity between the oxidation current and concentration of Norepinephrine ranging from 0.5 to 99.8 μM in phosphate buffer solution at pH 7.0. The limit of detection was 10.0 nM and the sensitivity was 0.455 μA/μM.

Conclusion:

The determination of Norepinephrine was successfully performed in real samples such as blood serum and urine at the poly (p-ABSA) sensor. To the best of our knowledge, this is the first study to detect Norepinephrine in the presence of ascorbic acid at poly (p-ABSA) modified sensor in the literature.

Conducting polymer-based electrochemical biosensors for neurotransmitters: A review

Neurotransmitters are important biochemical molecules that control behavioral and physiological functions in central and peripheral nervous system. Therefore, the analysis of neurotransmitters in biological samples has a great clinical and pharmaceutical importance. To date, various methods have been developed for their assay. Of the various methods, the electrochemical sensors demonstrated the potential of being robust, selective, sensitive, and real time measurements. Recently, conducting polymers (CPs) and their composites have been widely employed in the fabrication of various electrochemical sensors for the determination of neurotransmitters. Hence, this review presents a brief introduction to the electrochemical biosensors, with the detailed discussion on recent trends in the development and applications of electrochemical neurotransmitter sensors based on CPs and their composites. The review covers the sensing principle of prime neurotransmitters, including glutamate, aspartate, tyrosine, epinephrine, norepinephrine, dopamine, serotonin, histamine, choline, acetylcholine, nitrogen monoxide, and hydrogen sulfide. In addition, the combination with other analytical techniques was also highlighted. Detection challenges and future prospective of the neurotransmitter sensors were discussed for the development of biomedical and healthcare applications.

Simultaneous determination of norepinephrine, acetaminophen and tyrosine by differential pulse voltammetry using Au-nanoparticles/poly(2-amino-2-hydroxymethyl-propane-1,3-diol) film modified glassy carbon electrode

A novel Au-nanoparticles/poly-(2-amino-2-hydroxymethyl-propane-1,3-diol) film modified glassy carbon electrode (AuNPs/poly(trisamine)/GCE) was constructed for the simultaneous determination of norepinephrine (NE), acetaminophen (AC) and L-tyrosine (Tyr) by differential pulse voltammetry. Electrochemical impedance spectroscopy and scanning electron microscopy indicate that the trisamine film was successfully polymerized on the surface of GCE and the film efficiently decreased the charge transfer resistance value of electrode and improved the electron transfer kinetic between analytes and electrode. The separation of the oxidation peak potentials for NE-AC and AC-Tyr were about 160 mV and 240 mV, respectively. The calibration curves for NE, AC and Tyr were obtained in the range of 1.3-230.1 μmol L(-1), 1.90-188.0 μmol L(-1), and 3.9-61.8 μmol L(-1), respectively. The detection limits (S/N=3) were 0.07 μmol L(-1), 0.1 μmol L(-1) and 0.9 μmol L(-1), for NE, AC and Tyr, respectively. The diffusion coefficient and the catalytic rate constant for the oxidation reaction of NE at AuNPs/poly(trisamine)/GCE were calculated as 1.55 (±0.2)×10(-6) cm2 s(-1) and 2.28 (±0.17)×10(3) mol(-1) L s(-1), respectively. Finally, AuNPs/poly(trisamine)/GCE was satisfactorily used for the determination of NE, AC, and Tyr in pharmaceutical and biological samples.

AuNPs-poly-DAN modified pyrolytic graphite sensor for the determination of Cefpodoxime Proxetil in biological fluids

A sensitive and selective electrochemical method for Cefpodoxime Proxetil (CP) determination has been developed by incorporating gold nanoparticles (AuNPs) onto the poly-1,5-diaminonapthalene layer (p-DAN) coated pyrolytic graphite. The modified sensor was characterized by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The sensor exhibited an effective catalytic response towards oxidation of CP with excellent reproducibility and stability. The peak current of CP was found to be linear in the range of 0.1-12 μM and detection limit and sensitivity of 39 nM (S/N=3) and 4.621 μA μM(-1), respectively, were observed. The method was successfully applied for the determination of CP in pharmaceutical formulations and human urine samples. The common metabolites present in human urine such as uric acid, ascorbic acid, xanthine and hypoxanthine did not interfere in the determination. A comparison of the results obtained by using developed method with high performance liquid chromatography (HPLC) indicated a good agreement. The method is simple, sensitive, rapid and precise and is useful for the routine determination of CP in pharmaceutical dosages and biological samples.