Voltammetric Immunoassay for the Detection of Protein Biomarkers

Development of sensitive magnetic nanoparticle assisted rapid sandwich assay(s-MARSA) to monitor Parkinson's disease and Schizophrenia pharmacotherapy

Parkinson's disease and Schizophrenia fall under low dopamine neurodegenerative and high dopamine psychiatric disorders respectively. Pharmacological interventions to correct mid-brain dopamine concentrations sometimes overshoots the physiological dopamine levels leading to psychosis in Parkinson's disease patients and, extra-pyramidal symptoms in schizophrenia patients. Currently no validated method is available to monitor side effects in such patients, Apolipoprotein E is one of the CSF biomarkers identified in the recent past that shows an inverse relation to mid-brain dopamine concentration. In this study, we have developed s-MARSA for the detection of Apolipoprotein E from ultra-small volume (2 μL) of CSF. s-MARSA exhibits a broad detection range (5 fg mL^-1 to 4 μg mL^-1) with a better detection limit and could be performed within an hour utilizing only a small volume of CSF sample. The values measured by s-MARSA strongly correlates with the values measured by ELISA. Our method has advantages over ELISA in having a lower detection limit, a broader linear detection range, shorter analysis time, and requiring a low volume of CSF samples. The developed s-MARSA method holds promise for the detection of Apolipoprotein E with clinical utility for monitoring pharmacotherapy of Parkinson's and Schizophrenia patients.

Simultaneous Electrochemical Detection of LDL and MDA-LDL Using Antibody-Ferrocene or Anthraquinone Conjugates Coated Magnetic Beads

The simultaneous detection of atherosclerotic cardiovascular disease (ACSVD) biomarkers was recently of great scientific interest. In this work, magnetic beads-based immunosensors for the simultaneous detection of low density lipoprotein (LDL) and malondialdehyde-modified low density lipoprotein (MDA-LDL) were presented. The approach proposed was based on the formation of two types of specific immunoconjugates consisting of monoclonal antibodies: anti-LDL or anti-MDA-LDL, together with redox active molecules: ferrocene and anthraquinone, respectively, coated on magnetic beads (MBs). The decrease in redox agent current in the concentration range: 0.001-1.0 ng/mL for LDL and 0.01-10.0 ng/mL for MDA-LDL, registered by square wave voltammetry (SWV), was observed upon the creation of complex between LDL or MDA-LDL and appropriate immunoconjugates. The detection limits of 0.2 ng/mL for LDL and 0.1 ng/mL for MDA-LDL were estimated. Moreover, the results of selectivity against the possible interferents were good, as human serum albumin (HSA) and high density lipoprotein (HDL), stability and recovery studies demonstrated the potential of platform proposed for early prognosis and diagnosis of ASCVD.

Approaches and Challenges for Biosensors for Acute and Chronic Heart Failure

Heart failure (HF) is a cardiovascular disease defined by several symptoms that occur when the heart cannot supply the blood needed by the tissues. HF, which affects approximately 64 million people worldwide and whose incidence and prevalence are increasing, has an important place in terms of public health and healthcare costs. Therefore, developing and enhancing diagnostic and prognostic sensors is an urgent need. Using various biomarkers for this purpose is a significant breakthrough. It is possible to classify the biomarkers used in HF: associated with myocardial and vascular stretch (B-type natriuretic peptide (BNP), N-terminal proBNP and troponin), related to neurohormonal pathways (aldosterone and plasma renin activity), and associated with myocardial fibrosis and hypertrophy (soluble suppression of tumorigenicity 2 and galactin 3). There is an increasing demand for the design of fast, portable, and low-cost biosensing devices for the biomarkers related to HF. Biosensors play a significant role in early diagnosis as an alternative to time-consuming and expensive laboratory analysis. In this review, the most influential and novel biosensor applications for acute and chronic HF will be discussed in detail. These studies will be evaluated in terms of advantages, disadvantages, sensitivity, applicability, user-friendliness, etc.

Antibody–Ferrocene Conjugates as a Platform for Electro-Chemical Detection of Low-Density Lipoprotein

Low-density lipoprotein (LDL) is a cardiac biomarker identified in the pathology of cardiovascular disease (CVD). Typically, the level of LDL is calculated using the Friedewald relationship based on measured values of total cholesterol, high-density lipoproteins (HDL), and triglycerides. Unfortunately, this approach leads to some errors in calculation. Therefore, direct methods that can be used for fast and accurate detection of LDL are needed. The purpose of this study was to develop an electrochemical platform for the detection of LDL based on an antibody–ferrocene conjugate. An anti-apolipoprotein B-100 antibody labeled with ferrocene was covalently immobilized on the layer of 4-aminothiophenol (4-ATP) on the surface of gold electrodes. Upon interaction between LDL and the antibody–ferrocene conjugate, a decrease in the ferrocene redox signal registered by square wave voltammetry was observed, which depends linearly on the concentration from 0.01 ng/mL to 1.0 ng/mL. The obtained limit of detection was equal to 0.53 ng/mL. Moreover, the satisfied selectivity toward human serum albumin (HSA), HDL, and malondialdehyde-modified low-density lipoprotein (MDA-LDL) was observed. In addition, the acceptable recovery rates of LDL in human serum samples indicate the possible application of immunosensors presented in clinical diagnostics.

Antibody-Electroactive Probe Conjugates Based Electrochemical Immunosensors

Suitable immobilization of a biorecognition element, such as an antigen or antibody, on a transducer surface is essential for development of sensitive and analytically reliable immunosensors. In this review, we report on (1) methods of antibody prefunctionalization using electroactive probes, (2) methods for immobilization of such conjugates on the surfaces of electrodes in electrochemical immunosensor construction and (3) the use of antibody-electroactive probe conjugates as bioreceptors and sensor signal generators. We focus on different strategies of antibody functionalization using the redox active probes ferrocene (Fc), anthraquinone (AQ), thionine (Thi), cobalt(III) bipyridine (Co(bpy)33+), Ru(bpy)32+ and horseradish peroxidase (HRP). In addition, new possibilities for antibody functionalization based on bioconjugation techniques are presented. We discuss strategies of specific, quantitative antigen detection based on (i) a sandwich format and (ii) a direct signal generation scheme. Further, the integration of different nanomaterials in the construction of these immunosensors is presented. Lastly, we report the use of a redox probe strategy in multiplexed analyte detection.

Electrochemical immunoassay for the detection of stress biomarkers

A rapid electrochemical immunoassay method was developed to detect and measure stress biomarkers (cortisol and cortisone) in two biological samples (Zebrafish whole-body and artificial saliva). This methodology utilizes an immunoassay approach taking advantage of the lock and key mechanism that is related to the antibody-antigen interaction depending on the reliable immobilization of the antibody labelled with ferrocene tags (Ab-Fc) on a modified tin-doped indium oxide (ITO) electrode using electrochemical instrumentation to build a POC platform. The limit of detection (LOD) obtained for this biosensor was 1.03 pg ml⁻¹ for cortisol and 0.68 pg ml⁻¹ for cortisone, respectively. The correlation coefficient was 0.9852 and 0.9841 for cortisol and cortisone, respectively with a linear concentration from (0-50 ng ml⁻¹) which covers the standard levels of stress hormones in both selected biological samples. The incubation time was investigated and 30 min was found to be the optimum incubation time. This time would be acceptable for the POC system as total process time can be determined within 35 min.

A sensitive chemiluminescence based immunoassay for the detection of cortisol and cortisone as stress biomarkers

An electrochemically based antibody immobilization was used to perform environmentally and clinically relevant immunoassays for stress hormones biomarkers (cortisol and cortisone) using chemiluminescence (CL) detection. To achieve CL detection, the ferrocene tag on the antibodies was first oxidised, and this then acted as a catalyst for the luminol and hydrogen peroxide CL reaction. The conditions were optimised and measurements were made with an incubation time of 30 min. Using this approach limits of detection were obtained of 0.47 pg ml−1and 0.34 pg ml−1alsoR20.9912 and 0.9902 for cortisol and cortisone respectively with a linear concentration from 0 to 50 ng ml−1. The method was then applied to Zebrafish whole body and artificial saliva samples. For the Zebrafish sample recoveries of 91.0% and 90.0% were obtained with samples spiked with cortisol and cortisone, for artificial saliva the recoveries were 92.59% and 90.73% respectively. Interference studies showed only minor effects on the measurement of the analyte. A comparison between this procedure and the standard enzyme-linked immunosorbent assay (ELISA) procedure gave approximately the sameR2values.

Imaging immunoassay in negative: surface-catalysed chemiluminescence for the detection of pregnancy hormones in artificial saliva

Before and after exposure to progesterone or œstriol – visualising the extent of antibody/antigen complexation.