Renewable Silver Amalgam Film Electrode for the Determination of Dinotefuran in Spiked Carrot Juice Samples Using SW Voltammetry

Reviewing neonicotinoid detection with electroanalytical methods

Neonicotinoids, as the fastest-growing class of insecticides, currently account for over 25% of the global pesticide market. Their effectiveness in controlling a wide range of pests that pose a threat to croplands, home yards/gardens, and golf course greens cannot be denied. However, the extensive use of neonicotinoids has resulted in significant declines in nontarget organisms such as pollinators, insects, and birds. Furthermore, the potential chronic, sublethal effects of these compounds on human health remain largely unknown. To address these pressing issues, it is crucial to explore and understand the capabilities of electrochemical sensors in detecting neonicotinoid residues. Surprisingly, despite the increasing importance of this topic, no comprehensive review article currently exists in the literature. Therefore, our proposed review aims to bridge this gap by providing a thorough analysis of the use of electrochemical methods for neonicotinoid determination. In this review article, we will delve into various aspects of electrochemical analysis, including the influence of electrode materials, employed techniques, and the different types of electrode mechanisms utilized. By synthesizing and analysing the existing research in this field, our review will offer valuable insights and guidance to researchers, scientists, and policymakers alike.

Electrochemical sensors of neonicotinoid insecticides residues in food samples: From structure to analysis

Most food samples are detected positive for neonicotinoid insecticides, posing a severe threat to human health. Electrochemical sensors have been proven effective for monitoring the residues to guarantee food safety, but there needs to be more review to conclude the development status comprehensively. On the other hand, various modified materials were emphasized to improve the performance of electrochemical sensors in relevant reviews, rather than the reasons why they were selected. Therefore, this paper reviewed the electrochemical sensors of neonicotinoid insecticides according to bases and strategies. The fundamental basis is the molecular structure of neonicotinoid insecticides, which was disassembled into four functional groups: nitro group, saturated nitrogen ring system, aromatic heterocycle and chlorine substituent. Their relationships were established with strategies including direct sensing, enzyme sensors, aptasensors, immunosensors, and sample pretreatment, respectively. It is hoped to provide a reference for the effective design of electrochemical sensors for small molecule compounds.

Macro-meso-microporous carbon composite derived from hydrophilic metal-organic framework as high-performance electrochemical sensor for neonicotinoid determination

Electrochemical analysis enables pesticides monitoring become rapid and efficient. Herein, novel three dimensional nitrogen-doped macro-meso-microporous carbon composites (N/Cu-HPC) derived from polyvinylpyrrolidone (PVP) doped Cu-metal organic framework were successfully formed via one-pot solvothermal method followed by pyrolysis, which were further applied in high-performance electrochemical determination of neonicotinoid. The introduction of PVP endows the N/Cu-HPC good hydrophilicity preventing aggregation as well as more highly electronegative nitrogen species boosting electro-catalytic property dramatically. Interestingly, the macro-meso-microporous architecture improves mass and charge transports between neonicotinoid molecules and active sites such as Cu nanoparticles and carbon atoms possessing Lewis basicity next to pyridinic-N. Based on the N/Cu-HPC, imidacloprid (IDP), thiamethoxam (THA) and dinotefuran (DNF) were detected with wide linear detection ranges (0.5-60 μM for both IDP and DNF, 1-60 μM for THA) and low detection limits (0.026 μM for IDP, 0.062 μM for THA and 0.01 μM for DNF). Meanwhile, this sensor can be successfully used for determination of IDP, THA and DNF in oat, corn and rice with good recoveries (92.0-100.9%, RSD ≤ 4.8%), demonstrating that the N/Cu-HPC possesses a high potential to be an advanced sensing device for monitoring neonicotinoid in agricultural products.

Recyclable Luminescence Sensor for Dinotefuran in Water by Stable Cadmium-Organic Framework

Due to the widespread use of dinotefuran around the world, its impact on food and environmental safety has aroused great concern, and the establishment of a rapid and convenient approach for dinotefuran detection is necessary but challenging. Herein, we synthesized a unique three-dimensional framework {[(CH₃)₂NH₂]₂[Cd₃(BCP)₂]·10H₂O·3.5DMF}_n (1). Single-crystal X-ray analysis indicates that 1 possesses a 4,8-connected anion framework that corresponds to alb topology, with a one-dimensional rectangular channel along the c-axis with the size of 4 Å × 10 Å. Compound 1 displays satisfactory solvent and thermal stability. Luminescent investigations reveal that 1 can selectively detect dinotefuran by fluorescence quenching among other pesticides, displaying excellent anti-interference performance with common ions in water. Importantly, the limit of detection is as low as 2.09 ppm, which is far below the residual concentration of the U.S. food standard. A fluorescence quenching mechanism study shows that there exists competitive energy absorption and static quenching processes. To our knowledge, 1 is the first MOF-based fluorescence probe for dinotefuran detection.

Voltammetric detection of arsenic (III) using gold nanoparticles modified carbon screen printed electrodes: Application for facile and rapid analysis in commercial apple juice

This paper describes a voltammetric method and data analysis program developed for the detection of arsenic(III) in commercial apple juice. Arsenic(III) was detected using square wave stripping voltammetry with gold nanoparticle modified screen printed electrodes. The only sample pretreatment performed was the addition of a 100 mM phosphate buffer with a pH of 7. To compensate for interference from high ascorbic acid concentrations, a data analysis program was developed in MATLAB to fit a non-linear baseline, allowing for accurate peak height measurement. With this data analysis program, the developed methodology had a sensitivity of 0.1007 µA (µg L^-1)^-1 and a limit of detection of 16.73 µg L^-1. A comparison between the voltammetric method and graphite furnace atomic absorption spectroscopy showed no bias in the voltammetric results and a good correlation between the two sets of predicted concentrations, with an R² of 0.939.

Novel potentiometric sensors for the determination of the dinotefuran insecticide residue levels in cucumber and soil samples

Five new potentiometric membrane sensors for the determination of the dinotefuran levels in cucumber and soil samples have been developed. Four of these sensors were based on a newly designed molecularly imprinted polymer (MIP) material consisting of acrylamide or methacrylic acid as a functional monomer in a plasticized PVC (polyvinyl chloride) membrane before and after elution of the template. A fifth sensor, a carboxylated PVC-based sensor plasticized with dioctyl phthalate, was also prepared and tested. Sensor 1 (acrylamide washed) and sensor 3 (methacrylic acid washed) exhibited significantly enhanced responses towards dinotefuran over the concentration range of 10^-7-10^-2molL^-1. The limit of detection (LOD) for both sensors was 0.35µgL^-1. The response was near-Nernstian, with average slopes of 66.3 and 50.8mV/decade for sensors 1 and 3 respectively. Sensors 2 (acrylamide non-washed), 4 (methacrylic acid non-washed) and 5 (carboxylated-PVC) exhibited non-Nernstian responses over the concentration range of 10^-7-10^-3molL^-1, with LODs of 10.07, 6.90, and 4.30µgL^-1, respectively, as well as average slopes of 39.1, 27.2 and 33mV/decade, respectively. The application of the proposed sensors to the determination of the dinotefuran levels in spiked soil and cucumber samples was demonstrated. The average recoveries from the cucumber samples were from 7.93% to 106.43%, with a standard deviation of less than 13.73%, and recoveries from soil samples were from 97.46% to 108.71%, with a standard deviation of less than 10.66%. The sensors were applied successfully to the determination of the dinotefuran residue, its rate of disappearance and its half-life in cucumbers in soil in which a safety pre-harvest interval for dinotefuran was suggested.

Voltammetric behavior and quantitative determination of ambazone concentrations in urine and in a pharmaceutical formulation

The use of square wave adsorptive stripping voltammetry (SWAdSV) in conjunction with a cyclic renewable silver amalgam film electrode (Hg(Ag)FE) for the analytical determination of ambazone in urine samples and pharmaceutical formulations is described. A single reduction peak in Britton-Robinson buffer at pH 4.0 was detected at about −1.4 V versus Ag/AgCl. Mechanistic studies have shown that the compound can act as an electrocatalyst. The method was validated. The analytical curve was linear in the concentration range from 1.0×10−9 to 1.0×10−7 mol L−1. The detection and quantification limits were found to be 3.0×10−10 mol L−1 and 1.0×10−9 mol L−1, respectively. The proposed method was successfully applied to ambazone determination in real samples.

Sensitive and fast determination of papaverine by adsorptive stripping voltammetry on renewable mercury film electrode

The renewable mercury film electrode, applied for the determination of papaverine traces using differential pulse adsorptive stripping voltammetry (DP AdSV) is presented. The calibration graph obtained for papaverine is linear from 1.25 nM (0.42 µg L−1) to 95 nM (32.2 µg L−1) for a preconcentration time of 60 s, with correlation coefficient of 0.998. For the renewable mercury electrode (Hg(Ag)FE) with a surface area of 9.1 mm2 the detection limit for a preconcentration time of 60 s is 0.7 nM (0.24 µg L−1). The repeatability of the method at a concentration level of the analyte as low as 17 µg L−1, expressed as RSD is 3.3% (n=5). The proposed method was successfully applied and validated by studying the recovery of papaverine from drugs, urine and synthetic solution.