Electrodeposition of Cobalt Oxide Nanostructure on the Glassy Carbon Electrode for Electrocatalytic Determination of para -Nitrophenol

Decoration of alkalization-intercalated Ti3C2 with ZIF-8@ZIF-67-derived N-doped carbon nanocage for detecting 4-nitrophenol

The highly effective alk-Ti₃C₂/bimetallic Co, Zn embedded N-doped carbon (Co-Zn-NC) composite was fabricated by a convenient self-assembled method strategy and applied to  the reduction of 4-nitrophenol(4-NP). Co-Zn-NC nanocage was synthesized by using designed core-shell ZIF-8@ZIF-67 as sacrificial template. The Co-Zn-NC was prepared by pyrolysis of ZIF-8@ZIF-67 at 900 °C with high-specific surface area and hollow structure, which facilitates the dispersion of Co species and produces abundant Co-Nx active sites. In addition, the electrochemical property and specific surface area of Ti₃C₂ were improved by alkaline treatment. As a result, compared with alk-Ti₃C₂ and Co-Zn-NC, the alk-Ti₃C₂/Co-Zn-NC sensor showed higher activity and stability in detecting 4-NP. The alk-Ti₃C₂/Co-Zn-NC sensor has a wide determination range of 2-500 μM and a low detection limit of 0.23 μM for 4-NP. In addition, the newly developed alk-Ti₃C₂/Co-Zn-NC sensor displayed satisfactory reproducibility and  good stability in detecting 4-NP in aqueous samples.

Electrodeposition of Cobalt Oxides on Carbon Nanotubes for Sensitive Bromhexine Sensing

We develop an electrochemical sensor for the determination of bromhexine hydrochloride (BHC), a widely use mucolytic drug. The sensor is prepared by electrodeposition of cobalt oxides (CoO_x) on a glassy carbon electrode modified with carboxylated single-walled carbon nanotubes (SWCNT). A synergistic effect between CoO_x and SWCNT is observed, leading to a significant improvement in the BHC electrooxidation current. Based on cyclic voltammetry studies at varying scan rates, we conclude that the electrochemical oxidation of BHC is under mixed diffusion–adsorption control. The proposed sensor allows the amperometric determination of BHC in a linear range of 10–500 µM with a low applied voltage of 0.75 V. The designed sensor provides reproducible measurements, is not affected by common interfering substances, and shows excellent performance for the analysis of BHC in pharmaceutical preparations.

Comparative electrochemical energy storage performance of cobalt sulfide and cobalt oxide nanosheets: experimental and theoretical insights from density functional theory simulations

We have investigated the origin of enhanced energy storage performance of Co₃S₄ as compared to Co₃O₄ both by supported experimental and density functional theory investigations.

Selective capturing of phenolic derivative by a binary metal oxide microcubes for its detection

Development of highly efficient and potential material for toxic p-nitrophenol is an important design for sensitive detection of hazardous species from ecology and environment. Here it is developed, an efficient as well as selective of p-nitrophenol using binary material by electrochemical performances, including good linearity, lower detection limit, good stability, higher reproducibility and extreme sensitivity. The prepared electrode was fabricated by immobilization of SnO₂/CdO microcubes (MCs) with conducting coating binders by using well-known glassy carbon electrode (GCE). The proposed MCs with SnO₂/CdO were well-functionalized and prepared by facile hydrothermal technique. The general instrumentation namely, FTIR, UV/vis, FESEM, XPS, TEM, EDS, and powder XRD were employed for the morphological evaluation of the prepared doped MCs, structural, optical and elemental analyses. The large dynamic range (LDR) from 1.0 to 0.01 mM with 0.13 pM detection limit (S/N = 3), limit of quantification (LOQ; 0.43 pM), and an excellent sensitivity of 7.12 µAµM⁻¹cm⁻² were exhibited by the fabricated binary material based on SnO₂/CdO MCs for selective p-nitrophenol capturing. In shortly, the SnO₂/CdO MCs can be employed as an efficient electron mediator with binary materials fabricated GCE for capturing the p-nitrophenol at ultra-trace amounts. Then the binary synthesized material of SnO₂/CdO MCs is used as potential and sensitive sensor layer by stable electrochemical approach for sensitive capturing of toxic p-nitrophenol from environmental samples.

2-Nitrophenol sensor-based wet-chemically prepared binary doped Co3O4/Al2O3 nanosheets by an electrochemical approach

Herein, the wet-chemical process (co-precipitation) was used to prepare nanosheets (NSs) of Co₃O₄/Al₂O₃ in an alkaline medium (pH ∼ 10.5). The synthesized NSs were totally characterized by Fourier-transform infrared spectroscopy (FTIR), ultraviolet visible spectroscopy (UV/vis), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and powder X-ray diffraction (XRD). The synthesized NSs were deposited onto a glassy carbon electrode (GCE) to prepare a very thin layer with a conducting binder for detecting 2-nitrophenol (2-NP) selectively by a reliable electrochemical method. The proposed chemical sensor exhibits good sensitivity (54.9842 μA μM⁻¹ cm⁻²), long-term stability, and enhanced chemical response by electrochemical approaches. The resultant current is found to be linear over the concentration range (LDR) from 0.01 nM to 0.01 mM. The estimated detection limit (DL) is equal to 1.73 ± 0.02 pM. This study introduces a potential route for future sensitive sensor development with Co₃O₄/Al₂O₃ NSs by an electrochemical approach for the selective detection of hazardous and carcinogenic chemicals in environmental and health care fields.

This potential research work introduces a route of future sensitive sensor development with Co₃O₄/Al₂O₃ NSs by electrochemical approach to selective detection of hazardous and carcinogenic chemicals in environmental and health care fields.