Pacemaker Activated by an Abiotic Biofuel Cell Operated in Human Serum Solution

New strategies for energy supply of cardiac implantable devices

BACKGROUND

Heart disease and atrial fibrillation are the leading causes of death worldwide. Patient morbidity and mortality associated with cardiovascular disease can be reduced by more accurate and continuous diagnostic and therapeutic tools provided by cardiovascular implantable electronic devices (CIEDs).

OBJECTIVES

Long-term operation of CIEDs continues to be a challenge due to limited battery life and the associated risk of device failure. To overcome this issue, new approaches for autonomous battery supply are being investigated.

RESULTS

Here, the state of the art in CIED power supply is presented and an overview of current strategies for autonomous power supply in the cardiovascular field is given, using the body as a sustainable energy source. Finally, future challenges and potentials as well as advanced features for CIEDs are discussed.

CONCLUSION

CIEDs need to fulfil more requirements for diagnostic and telemetric functions, which leads to higher energy requirements. Ongoing miniaturization and improved sensor technologies will help in the development of new devices.

A membrane-less Glucose/O2 non-enzymatic fuel cell based on bimetallic Pd-Au nanostructure anode and air-breathing cathode: Towards micro-power applications at neutral pH

Herein, the authors propose a miniaturized glucose/O₂ n-EFC based on a new direct electron transfer. The anode is a screen-printed carbon electrode (SPCE) modified with functionalized carbon nanotubes (f-CNTs) and cauliflower-like PdAu nanostructures (PdAuNS). The PdAuNS/f-CNT biomimetic nanocatalyst was prepared using a cost-effective and straightforward method, which consisted of drop-casting well-dispersed f-CNTs over the SPCE surface before PdAuNS electrodeposition. This enzyme-free interface was used for glucose electrooxidation at neutral medium (pH 7.4). The electrochemical behaviour of the PdAuNS/f-CNT/SPCE was investigated using cyclic voltammetry, linear sweep voltammetry, and amperometry. Several parameters were optimized and discussed, including the metal precursor concentration (HAuCl₄, PdCl₂) and the electrodeposition conditions. The cathode for oxygen electroreduction is an air-cathode which is composed of Pt-coated carbon cloth. The electrochemical performances of the anode and the cathode were evaluated separately for glucose oxidation and oxygen reduction, respectively. Both electrodes were then assembled in a membrane-less single chamber n-EFC with an innovative architecture. Electrical characterization of the n-EFC supplied with a neutral buffered solution containing 20 mM glucose showed a maximal power output of 129 ± 11 μW cm^-2, a current density of 600 ± 39 μA cm^-2 with a cell voltage of 0.35 V, and an open circuit potential of 0.56 V. The proposed electrocatalyst possesses several advantages such as fast response, low cost, reusability, poison-free characteristics, and good stability. Hence, glucose/O₂ n-EFC could be of great interest in direct glucose fuel cell applications (e.g., powering mountable/implantable biomedical micro-devices running at low electrical power supply) or in self-powered biosensing.

Research Progress and Prospects of Nanozyme-Based Glucose Biofuel Cells

The appearance and evolution of biofuel cells can be categorized into three groups: microbial biofuel cells (MBFCs), enzymatic biofuel cells (EBFCs), and enzyme-like nanomaterial (nanozyme)-based biofuel cells (NBFCs). MBFCs can produce electricity from waste; however, they have significantly low power output as well as difficulty in controlling electron transfer and microbial growth. EBFCs are more productive in generating electricity with the assistance of natural enzymes, but their vulnerability under diverse environmental conditions has critically hindered practical applications. In contrast, because of the intrinsic advantages of nanozymes, such as high stability and robustness even in harsh conditions, low synthesis cost through facile scale-up, and tunable catalytic activity, NBFCs have attracted attention, particularly for developing wearable and implantable devices to generate electricity from glucose in the physiological fluids of plants, animals, and humans. In this review, recent studies on NBFCs, including the synthetic strategies and catalytic activities of metal and metal oxide-based nanozymes, the mechanism of electricity generation from glucose, and representative studies are reviewed and discussed. Current challenges and prospects for the utilization of nanozymes in glucose biofuel cells are also discussed.

Palladium supported on a novel ordered mesoporous polypyrrole/carbon nanocomposite as a powerful heterogeneous catalyst for the aerobic oxidation of alcohols to carboxylic acids and ketones on water

Preparation of an ordered mesoporous polypyrrole/carbon (PPy/OMC) composite has been described through a two-step nanocasting process using KIT-6 as a template. Characterization of the PPy/OMC nanocomposite by various analysis methods such as TEM, XRD, TGA, SEM and N₂ sorption confirmed the preparation of a material with ordered mesoporous structure, uniform pore size distribution, high surface area and high stability. This nanocomposite was then used for the immobilization of palladium nanoparticles. The nanoparticles were almost uniformly distributed on the support with a narrow particle size of 20-25 nm, confirmed by various analysis methods. Performance of the Pd@PPy/OMC catalyst was evaluated in the aerobic oxidation of various primary and secondary alcohols on water as a green solvent, giving the corresponding carboxylic acids and ketones in high yields and excellent selectivity. The catalyst could also be reused for at least 10 reaction runs without losing its catalytic activity and selectivity. High catalytic efficiency of the catalyst can be attributed to a strong synergism between the PPy/OMC and that of supported Pd nanoparticles.

Recent advances in the electrooxidation of biomass-based organic molecules for energy, chemicals and hydrogen production

The recent developments in biomass-derivative fuelled electrochemical converters for electricity or hydrogen production together with chemical electrosynthesis have been reviewed.

Bare laser-synthesized palladium–gold alloy nanoparticles as efficient electrocatalysts for glucose oxidation for energy conversion applications

Laser-synthesized PdAu nanoparticles demonstrate a strong synergetic effect on glucose oxidation combining high catalytic activity with ultrafast kinetics at low potentials.

Symbiotic cardiac pacemaker

Self-powered implantable medical electronic devices that harvest biomechanical energy from cardiac motion, respiratory movement and blood flow are part of a paradigm shift that is on the horizon. Here, we demonstrate a fully implanted symbiotic pacemaker based on an implantable triboelectric nanogenerator, which achieves energy harvesting and storage as well as cardiac pacing on a large-animal scale. The symbiotic pacemaker successfully corrects sinus arrhythmia and prevents deterioration. The open circuit voltage of an implantable triboelectric nanogenerator reaches up to 65.2 V. The energy harvested from each cardiac motion cycle is 0.495 μJ, which is higher than the required endocardial pacing threshold energy (0.377 μJ). Implantable triboelectric nanogenerators for implantable medical devices offer advantages of excellent output performance, high power density, and good durability, and are expected to find application in fields of treatment and diagnosis as in vivo symbiotic bioelectronics.

Including Liquid Metal into Porous Elastomeric Films for Flexible and Enzyme-Free Glucose Fuel Cells: A Preliminary Evaluation

This communication introduces a new flexible elastomeric composite film, which can directly convert the chemical energy of glucose into electricity. The fabrication process is simple, and no specific equipment is required. Notably, the liquid metal Galinstan is exploited with a two-fold objective: (i) Galinstan particles are mixed with polydimethylsiloxane to obtain a highly conductive porous thick film scaffold; (ii) the presence of Galinstan in the composite film enables the direct growth of highly catalytic gold structures. As a first proof of concept, we demonstrate that when immersed in a 20 mM glucose solution, a 5 mm-long, 5 mm-wide and 2 mm-thick sample can generate a volumetric power density up to 3.6 mW·cm − 3 at 7 mA·cm − 3 and 0.51 V without using any enzymes.

Flexible Laser-Induced Graphene for Nitrogen Sensing in Soil

Flexible graphene electronics are rapidly gaining interest, but their widespread implementation has been impeded by challenges with ink preparation, ink printing, and postprint annealing processes. Laser-induced graphene (LIG) promises a facile alternative by creating flexible graphene electronics on polyimide substrates through the one-step laser writing fabrication method. Herein, we demonstrate the use of LIG, created with a low-cost UV laser, for electrochemical ion-selective sensing of plant-available nitrogen (i.e., both ammonium and nitrate ions: NH₄⁺ and NO₃^-) in soil samples. The laser used to create the LIG was operated at distinct pulse widths (10, 20, 30, 40, and 50 ms) to maximize the LIG electrochemical reactivity. Results illustrated that a laser pulse width of 20 ms led to a high percentage of sp² carbon (77%) and optimal peak oxidation current of 120 μA during cyclic voltammetry of ferro/ferricyanide. Therefore, LIG electrodes created with a 20 ms pulse width were consequently functionalized with distinct ionophores specific to NH₄⁺ (nonactin) or NO₃^- (tridodecylmethylammonium nitrate) within poly(vinyl chloride)-based membranes to create distinct solid contact ion-selective electrodes (SC-ISEs) for NH₄⁺ and NO₃^- ion sensing, respectively. The LIG SC-ISEs displayed near Nernstian sensitivities of 51.7 ± 7.8 mV/dec (NH₄⁺) and -54.8 ± 2.5 mV/dec (NO₃^-), detection limits of 28.2 ± 25.0 μM (NH₄⁺) and 20.6 ± 14.8 μM (NO₃^-), low long-term drift of 0.93 mV/h (NH₄⁺ sensors) and -5.3 μV/h (NO₃^- sensors), and linear sensing ranges of 10^-5-10^-1 M for both sensors. Moreover, soil slurry sensing was performed, and recovery percentages of 96% and 95% were obtained for added NH₄⁺ and NO₃^-, respectively. These results, combined with a facile fabrication that does not require metallic nanoparticle decoration, make these LIG electrochemical sensors appealing for a wide range of in-field or point-of-service applications for soil health management.

Implantable Energy-Harvesting Devices

The sustainable operation of implanted medical devices is essential for healthcare applications. However, limited battery capacity is a key challenge for most implantable medical electronics (IMEs). The human body abounds with mechanical and chemical energy, such as the heartbeat, breathing, blood circulation, and the oxidation-reduction of glucose. Harvesting energy from the human body is a possible approach for powering IMEs. Many new methods for developing in vivo energy harvesters (IVEHs) have been proposed for powering IMEs. In this context energy harvesters based on the piezoelectric effect, triboelectric effect, automatic wristwatch devices, biofuel cells, endocochlear potential, and light, with an emphasis on fabrication, energy output, power management, durability, animal experiments, evaluation criteria, and typical applications are discussed. Importantly, the IVEHs that are discussed, are actually implanted into living things. Future challenges and perspectives are also highlighted.

A self-powered biosensing device with an integrated hybrid biofuel cell for intermittent monitoring of analytes

In this work, we propose an integrated self-powered sensing system, driven by a hybrid biofuel cell (HBFC) with carbon paper discs coated with multiwalled carbon nanotubes. The sensing system has a biocathode made from laccase or bilirubin oxidase, and the anode is made from a zinc plate. The system includes a dedicated custom-built electronic control unit for the detection of oxygen and catechol analytes, which are central to medical and environmental applications. Both the HBFC and sensors, operate in a mediatorless direct electron transfer mode. The measured characteristics of the HBFC with externally applied resistance included the power-time dependencies under flow cell conditions, the sensors performance (evaluated by cyclic voltammetry), and chronoamperometry. The HBFC is integrated with analytical devices and operating in a pulse mode form long-run monitoring experiments. The HBFC generated sufficient power for wireless data transmission to a local computer.