Selective Detection of Dopamine in the Presence of Uric Acid Using NiO Nanoparticles Decorated on Graphene Nanosheets Modified Screen-printed Electrodes

Electrochemically Grown Hole-Rich NiO(OH) Thin Films toward Hole-Mediated Very Fast and Selective Enzyme-Free Electrochemical Sensing of Dopamine under Simulated Environment

This work aimed to develop an enzyme-free semiconductor-assisted electrochemical technique for the selective detection of the neurotransmitter dopamine. In this case, electrochemically grown nickel oxyhydroxide [NiO(OH)] thin films were chosen to fabricate the sensing platform, i.e., the electrodes. Chronoamperometry was used to deposit the films on indium tin oxide (ITO) coated glass substrates. The films were thoroughly characterized to establish their structure, composition, phase purity, and electrochemical attributes. Electrochemical sensing characteristics were investigated by means of cyclic and differential pulse voltammetry, steady-state amperometry, and electrochemical impedance spectroscopy. The effects of several interfering agents like glucose, sodium chloride, methanol, hydrogen peroxide, and paracetamol were also studied on the detection attributes of dopamine. Significantly high value of sensitivity (11.87 μA μM-1 cm-2) was obtained for dopamine sensing that was associated with a limit of detection (LoD) of 0.22 μM of dopamine. However, the sensitivity (2.51 μA μM-1 cm-2) and LoD (1.20 μM) obtained for serotonin were inferior compared to those of dopamine. The performance of the electrode toward dopamine sensing was not compromised either in the presence of only serotonin or a series of other electroactive interfering agents, which makes the electrode very much dopamine selective. The dopamine response time was 200 ms, which is notably fast. Extensive studies on the effect of temperature, pH and scan rate on the detection of dopamine by the developed electrode material have also been carried out. The developed electrodes were also found to be notably stable for dopamine detection with a decay of only 6.6% in oxidation peak current density after the 50th cycle. Real-life application of the developed electrode material was checked with urine samples from adult male humans and yielded encouraging results.

Unlocking the future of brain research: MOFs, TMOs, and MOFs/TMOs for electrochemical NTMs detection and analysis

The central nervous system relies heavily on neurotransmitters (NTMs), and NTM imbalances have been linked to a wide range of neurological conditions. Thus, the development of reliable detection techniques is essential for advancing brain studies. This review offers a comprehensive analysis of metal-organic frameworks (MOFs), transition metal oxides (TMOs), and MOFs-derived TMOs (MOFs/TMOs) as materials for electrochemical (EC) sensors targeting the detection of key NTMs, specifically dopamine (DA), epinephrine (EP), and serotonin (SR). The unique properties and diverse families of MOFs and TMOs, along with their nanostructured hybrids, are discussed in the context of EC sensing. The review also addresses the challenges in detecting NTMs and proposes a systematic approach to tackle these obstacles. Despite the vast amount of research on MOFs and TMOs-based EC sensors for DA detection, the review highlights the gaps in the literature for MOFs/TMOs-based EC sensors specifically for EP and SR detection, as well as the limited research on microneedles (MNs)-based EC sensors modified with MOFs, TMOs, and MOFs/TMOs for NTMs detection. This review serves as a foundation to encourage researchers to further explore the potential applications of MOFs, TMOs, and MOFs/TMOs-based EC sensors in the context of neurological disorders and other health conditions related to NTMs imbalances.

Efficient Point-of-Care Detection of Uric Acid in the Human Blood Sample with an Enhanced Electrocatalytic Response Using Nanocomposites of Cobalt and Mixed-Valent Molybdenum Sulfide

This work efficiently detects uric acid (UA) in a human blood sample using cobalt nanoparticle-immobilized mixed-valent molybdenum sulfide on the copper substrate in a point-of-care (PoC) device. The sensor electrode was fabricated by micromachining of Cu clad boards employing an engraver to generate a three-electrode system consisting of working electrode (WE), reference electrode (RE), and counter electrode (CE). The WE was subjected to physical vapor deposition of mixed-valent MoSx layers by a reaction between Mo(CO)6 and H2S at ∼200 °C using a simple setup following which CoNPs were electrochemically deposited. The RE and CE were covered with Ag/AgCl and Ag paste, respectively. A plasma separation membrane acted as the medium of UA/blood serum delivery to the electrodes. The material and electrochemical characterization confirmed that CoNPs over MoSx provided an enlarged electroactive surface for the direct electron transfer to achieve an enhanced electrocatalytic response. The binary combination of CoNPs and MoSx layers over the Cu electrode reduced the charge-transfer resistance by two times, enhanced the surface adsorption by more than two times, and yielded a high diffusion coefficient of 3.46 × 10-3 cm2/s. These interfacial effects facilitated the UA oxidation, leading to unprecedented mA range current density for UA sensing for the PoC device. The electrochemical detection tests in the PoC device revealed a sensitivity of 64.7 μA/μM cm-2, which is ∼50 times higher compared to the latest reported value (1.23 μA/μM cm-2), a high limit of detection of 5 nM, and shelf life of 6 months, confirming the synergistic effect-mediated high sensitivity under PoC settings. Interference tests confirmed no intervention of similar analytes. Tests on blood samples demonstrated a recovery percentage close to 100% in human serum UA, signifying the suitability of the nanocomposite-based sensor and the PoC device for clinical sensing applications.

Analysis of Electromagnetic Shielding Properties of a Material Developed Based on Silver-Coated Copper Core-Shell Spraying

This study proposes an electromagnetic shielding material sprayed with silver-coated copper powder (core-shell powder). The shielding properties of the material are analyzed in details section. Cross-sectional observation and sheet resistance measurement were used to determine the thickness and electrical conductivity of the electromagnetic shielding layer, which was generated by spray-coating; this aided in confirming the uniformity of the coating film. The results indicate that the electromagnetic interference shielding effectiveness increases when the silver-coated copper paste (core-shell paste) is used as the coating material rather than the conventional aluminum base. The proposed material can be used in various frequency ranges owing to the excellent shielding effectiveness of the core-shell paste used in this study. Further investigations on the optimized spray-coating type of electromagnetic shielding material are required based on the composition of the core-shell paste and the thickness of the coating film.

Nickel Cobaltite Nanoplate-Based Electrochemical Sensing Platform from Printable Inks for Simultaneous Detection of Dopamine and Uric Acid

2D metal oxide-based nanomaterials have emerged as an exciting area of research owing to their rich electrochemical properties and diverse applications, including biosensors. In this work, we have synthesized ultra-thin Co₃ O₄ , NiO, and NiCo₂ O₄ nanostructures supported on a carbon cloth and printed graphite/Kapton substrates following thermal reduction of self-assembled metal alkanethiolates. These nanostructures act as a sensing platform for simultaneous detection of dopamine (DA) and uric acid (UA), important biological molecules in physiological and pathological tests. The ultrathin 2D nanoplates of NiCo₂ O₄ spinel formed in this study exhibit high electrochemical activity than pristine NiO and Co₃ O₄ . The electrochemical characterization studies indicate that NiCo₂ O₄ possesses a high potential for DA and UA with a peak separation of ∼140 mV, high sensitivity, and excellent selectivity. The low-cost and disposable, single-shot probe biosensors fabricated in this work possess a wide working range of 0.001-1000 μM with detection limits of 0.33 and 0.49 nM for DA and UA, respectively, with a practically achievable limit of quantification of ∼1 nM. Multiple sensing electrodes are printed on graphite/Kapton all at once following this method with improved reproducibility for DA and UA sensing further extending the scope of work towards mass fabrication and practical usage.

Non-enzymatic electrochemical determination of salivary cortisol using ZnO-graphene nanocomposites

Electrochemically deposited ZnO nanoparticles on a pencil graphite electrode (PGE) coated with graphene generate a noteworthy conductive and selective electrochemical sensing electrode for the estimation of cortisol. Electrochemical techniques such as cyclic voltammetry (CV) analysis and electrochemical impedance spectroscopic (EIS) tests were adopted to analyze and understand the nature of the modified sensor. Surface morphological analysis was done using various spectroscopic and microscopic techniques like X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Structural characterization was conducted by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The effect of scan rate, concentration, and cycle numbers was optimized and reported. Differential pulse voltammetric (DPV) analysis reveals that the linear range for the detection of cortisol is 5 × 10⁻¹⁰M − 115 × 10⁻¹⁰ M with a very low-level limit of detection value (0.15 nM). The demonstrated methodology has been excellently functional for the determination of salivary cortisol non-enzymatically at low-level concentration with enhanced selectivity despite the presence of interfering substances.

Electrochemically deposited ZnO nanoparticles on a pencil graphite electrode (PGE) coated with graphene generate a noteworthy conductive and selective electrochemical sensing electrode for the estimation of cortisol.

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.

Electrochemical Biosensing of Dopamine Neurotransmitter: A Review

Neurotransmitters are biochemical molecules that transmit a signal from a neuron across the synapse to a target cell, thus being essential to the function of the central and peripheral nervous system. Dopamine is one of the most important catecholamine neurotransmitters since it is involved in many functions of the human central nervous system, including motor control, reward, or reinforcement. It is of utmost importance to quantify the amount of dopamine since abnormal levels can cause a variety of medical and behavioral problems. For instance, Parkinson's disease is partially caused by the death of dopamine-secreting neurons. To date, various methods have been developed to measure dopamine levels, and electrochemical biosensing seems to be the most viable due to its robustness, selectivity, sensitivity, and the possibility to achieve real-time measurements. Even if the electrochemical detection is not facile due to the presence of electroactive interfering species with similar redox potentials in real biological samples, numerous strategies have been employed to resolve this issue. The objective of this paper is to review the materials (metals and metal oxides, carbon materials, polymers) that are frequently used for the electrochemical biosensing of dopamine and point out their respective advantages and drawbacks. Different types of dopamine biosensors, including (micro)electrodes, biosensing platforms, or field-effect transistors, are also described.

A hierarchical 3D camellia-like molybdenum tungsten disulfide architectures for the determination of morphine and tramadol

A practical technique was applied to fabricate MoWS₂ nanocomposite through a one-pot hydrothermal method for use as the electrocatalyst. The characterization of MoWS₂ nanocomposite was investigated by several techniques to identify the size, crystal structure, and elemental composition. MoWS₂ nanocomposite exhibited a unique and well-defined hierarchical structure with neatly and densely piled nanopetals acting as the active sites in the electrocatalytic reactions. A carbon screen-printed electrode (CSPE) modified with interesting MoWS₂ nanopetals (MoWS₂/CSPE) was constructed. Subsequently, the electrochemical oxidation of morphine on fabricated MoWS₂/CSPE was studied. Experimental results confirm that under optimized conditions, the maximum oxidation current of morphine occurs at 275 mV in the case of MoWS₂/CSPE that is around 100 mV more negative than that observed in the case of the unmodified CSPE and about 2.6 times increase was observed for the oxidation peak current. The analytical approach was obtained by differential pulse voltammetry in accordance with the relationship between the oxidation peak current and the morphine concentration. The oxidation peak currents for morphine were found to vary linearly with its concentrations in the range of 4.8 × 10^-8-5.05 × 10^-4 M with the detection limit of 1.44 × 10^-8 M. Two completely separated signals occured at the potentials of 275 mV and 920 mV for oxidation of morphine and tramadol at the surface of MoWS₂/CSPE which are sufficient for determination of morphine in the presence of tramadol. The presence of morphine was also detected in real samples using the introduced approach. Graphical abstract Schematic representation of fabrication of the MoWS₂ nanocomposite through a one-pot hydrothermal method for use as the electrocatalyst. A carbon screen-printed electrode was modified with MoWS₂ nanocomposite. Subsequently, the electrochemical oxidation of morphine on the fabricated electrode was studied.

Sensitive electrochemical sensing platform for selective determination of dopamine based on amorphous cobalt hydroxide/polyaniline nanofibers composites

In this study, amorphous cobalt hydroxide/polyaniline nanofibers (Co(OH)₂/PANINF) composites were successfully prepared. The formation of amorphous Co(OH)₂ with irregular surface structure was confirmed by x-ray diffraction, scanning electron microscopy, and selected-area electron diffraction. The non-enzymatic electrochemical sensor for the selective and sensitive determination of dopamine (DA) has been constructed by using Co(OH)₂/PANINF composites modified glassy carbon electrode (Co(OH)₂/PANINF/GCE), which exhibited excellent electrocatalytic activity toward DA, in a large part owing to the advantages of large surface area of amorphous Co(OH)₂ and the synergetic effect between Co(OH)₂ and PANINF. The electrochemical kinetics reveal that the DA oxidation involves two electrons and two protons in a quasi-reversible electrode reaction. Differential pulse voltammetry (DPV) studies show remarkable sensing performance for the determination of DA, with a low detection limit of 0.03 μM, and a wide linear range from 0.1 to 200 μM. From a broader perspective, the present study demonstrates that Co(OH)₂/PANINF composites would be promising supporting materials for novel sensing platforms.

Electrochemical detection of serotonin: A new approach

Serotonin (5-hydroxytryptamine, 5-HT) is an important neurotransmitter which plays a significant role in various functions in the body, such as appetite, emotions, and autonomic functions. It is well known that biomarker 5-HT levels can be correlated to several diseases and disorders such as depression, anxiety, irritable bowel, and sleep trouble. Among various methods for detecting the 5-HT biomarker, electrochemical techniques have attracted great interest due to their low cost and ease of operation. However, sensitive and precise electrochemical detection of 5-HT levels is not possible using bare electrodes, thus requiring electrode modification. The present review aims to describe the different electroanalytical methods for 5-HT detection using various surface-modified electrodes such as glassy carbon, carbon fiber, diamond, graphite, and metal electrodes modified with conductive polymers. Perspectives and the modification of electrode surface using applied polymers for 5-HT detection have also been presented.

Core@shell Nanoparticles: Greener Synthesis Using Natural Plant Products

Among an array of hybrid nanoparticles, core-shell nanoparticles comprise of two or more materials, such as metals and biomolecules, wherein one of them forms the core at the center, while the other material/materials that were located around the central core develops a shell. Core-shell nanostructures are useful entities with high thermal and chemical stability, lower toxicity, greater solubility, and higher permeability to specific target cells. Plant or natural products-mediated synthesis of nanostructures refers to the use of plants or its extracts for the synthesis of nanostructures, an emerging field of sustainable nanotechnology. Various physiochemical and greener methods have been advanced for the synthesis of nanostructures, in contrast to conventional approaches that require the use of synthetic compounds for the assembly of nanostructures. Although several biological resources have been exploited for the synthesis of core-shell nanoparticles, but plant-based materials appear to be the ideal candidates for large-scale green synthesis of core-shell nanoparticles. This review summarizes the known strategies for the greener production of core-shell nanoparticles using plants extract or their derivatives and highlights their salient attributes, such as low costs, the lack of dependence on the use of any toxic materials, and the environmental friendliness for the sustainable assembly of stabile nanostructures.