A Novel Cerium Tungstate Nanosheets Modified Electrode for the Effective Electrochemical Detection of Carcinogenic Nitrite Ions

Investigation of g-C3N4/Ce2(WO4)3 Nanocomposites for the Removal of Basic Dyes

Herein, we have synthesized pristine and g-C3N4-assisted Ce2(WO4)3 via a facile hydrothermal method. The structure was confirmed with the standard JCPDS card. g-C3N4 encapsulated the crystal and reduced the size. The Raman spectra revealed the presence of Ce-O, W-O stretching and bending vibrations. Electron hole transfer facilitation and controllable recombination were altered by g-C3N4 heterojunction with cerium tungstate. Ce2(WO4)3 possessed a larger band gap. As g-C3N4 was assisted, the band gap was reduced which facilitates Ce2(WO4)3 to utilize more visible light. The prepared photocatalysts were used to investigate the model pollutant removal with visible light. The pure Janus Green B sample showed lesser efficiency, as it does not show self-degradation under light. As Ce2(WO4)3 was added, it slightly improved the efficiency as it possesses lower electron hole transfer and high recombination. Thus, g-C3N4 was composited with Ce2(WO4)3 to make heterojunctions which will enhance the photo-excited electron and hole transfer and decrease e-/h+ recombination. The rate constant values of the photocatalysts were calculated, and the system follows the first-order pseudo-kinetic model. Ciprofloxacin, a well-known antibiotic, was also used to degrade under visible light. The pure sample showed lower efficiency, and the antibiotic was reduced well with the addition of prepared photocatalysts. The modification of Ce2(WO4)3 with the optimum-level g-C3N4 facilitated electron hole charge transfer, and numerous adsorbed dye molecules on the photocatalyst surface made 0.1 g g-C3N4-Ce2(WO4)3 a plausible photocatalyst for the water remediation process.

Electrochemical Analysis of Sulfisoxazole Using Glassy Carbon Electrode (GCE) and MWCNTs/Rare Earth Oxide (CeO2 and Yb2O3) Modified-GCE Sensors

In this work, new electrochemical sensors based on the modification of glassy carbon electrode (GCE) with multiwalled carbon nanotubes (MWCNTs)-rare metal oxides (REMO) nanocomposites were fabricated by drop-to-drop method of MWCNTs-REMO dispersion in ethanol. REMO nanoparticles were synthesized by precipitation followed by hydrothermal treatment at 180 °C in absence and presence of Triton^TM X-100 surfactant. Cyclic voltammetry (CV) analysis using MWCNTs-CeO₂@GCE and MWCNTs-Yb₂O₃@GCE sensors were used for the analysis of sulfisoxazole (SFX) drug in water samples. The results of CV analysis showed that MWCNTs-REMO@GCE sensors have up to 40-fold higher sensitivity with CeO₂ compared to the bare GCE sensor. The estimated values of the limit of detection (LoD) of this electrochemical sensing using MWCNTs-CeO₂@GCE and MWCNTs-Yb₂O₃@GCE electrodes reached 0.4 and 0.7 μM SFX in phosphate buffer pH = 7, respectively. These findings indicate that MWCNTs-REMO@GCE electrodes are potential sensors for analysis of sulfonamide drugs in water and biological samples.

Colorimetric detection of H2O2 based on the enhanced peroxidase mimetic activity of nanoparticles decorated Ce2(WO4)3 nanosheets

In this paper, nanoparticles decorated Ce₂(WO₄)₃ nanosheets (CWNSs) with negative potential and large specific surface area were synthesized and developed as highly efficient peroxidase mimics for colorimetric detection of H₂O₂. CWNSs can efficiently catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂ to induce an obvious color variation. Kinetic analysis indicated that the catalytic behaviors of CWNSs obey the typical Michaelis-Menten mechanism. The peroxidase-like catalytic mechanism of CWNSs was proposed according to the active species trapping experiments, verifying that ·O₂^- radicals played primary roles in the catalytic reaction. Based on the strong and stable peroxidase-like catalytic activity of CWNSs, a simple, rapid, selective, and ultrasensitive method was successfully established for colorimetric detection of H₂O₂. The method has a good linear response ranging from 0.5 μM to 100 μM for H₂O₂ concentration with a lower detection limit of 0.15 μM. Benefitting from the sensitive response and good stability, the method is applied in real sample detection and shows a favorable reproducibility and feasibility. This work not only provides a novel enzymatic mimics with remarkable catalytic activities for biomedical and environmental analysis, but also extends the application area of Ce₂(WO₄)₃ materials.

Simple sonochemical synthesis of lanthanum tungstate (La2(WO4)3) nanoparticles as an enhanced electrocatalyst for the selective electrochemical determination of anti-scald-inhibitor diphenylamine

In this work, lanthanum tungstate (La₂(WO₄)₃) nanoparticles (NPs) were synthesized by facile sonochemical method (elmasonic P, under-sonication 37/100 kHz, ~60 W energy) and utilized as an electrode material for the selective and sensitive electrochemical determination of anti-scald inhibitor diphenylamine (DPA). The synthesized La₂(WO₄)₃ NPs were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDAX), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) analyses. The results revealed that the sonochemically synthesized La₂(WO₄)₃ nanoparticles were with high crystallinity and uniformly distributed nanoparticles like structure. The as-prepared lanthanum tungstate NPs exhibited an excellent electrocatalytic behavior for DPA determination with the lowest detection limit of 0.0024 µM, wide linear range response of 0.01-58.06 µM and a remarkable sensitivity of 1.021 µA µM^-1 cm^-2. Furthermore, La₂(WO₄)₃ NPs showed a good recovery to DPA in apple juice sample. Besides, the electrochemical mechanism of the DPA oxidation reaction was provided in detail.

Structural Insights on 2D Gadolinium Tungstate Nanoflake: A Promising Electrocatalyst for Sensor and Photocatalyst for the Degradation of Postharvest Fungicide (Carbendazim)

Gadolinium tungstate (Gd₂(WO₄)₃) has acquired much attention owing to its exclusive transport properties and excellent thermal and chemical stability. In this work, we demonstrate that two-dimensional (2D) gadolinium tungstate nanoflakes (GW Nfs) are synthesized by a coprecipitation method and represent novel architectures for efficient catalysis, which could be used in electrochemical sensing and photocatalytic degradation of the postharvest fungicide carbendazim (CBZ). The physicochemical properties of GW Nfs were studied by using XRD, Raman, TEM, EDX, and XPS, which show the formation of GW as a nanoflake-like structure with a well crystallized nature. The as-prepared GW Nfs revealed an admirable electrochemical response for CBZ detection with an LOD of 0.005 μM, a wide-ranging linear response of 0.02 to 40 μM, and a notable sensitivity of 0.39 μA μM^-1 cm^-2. Furthermore, the GW-Nf-modified electrode has a good recovery for CBZ in the study of real samples such as rice and soil washed water samples. Moreover, GW Nfs have a promising photocatalytic activity for CBZ degradation. The GW Nfs could degrade CBZ at greater than 98% efficiency and mineralize above 74% of the CBZ molecules in the presence of visible light irradiation with superior stability even after many cycles. Subsequently, the electrochemical and photocatalytic mechanisms were provided in detail.

Ultrasonication-assisted synthesis of sphere-like strontium cerate nanoparticles (SrCeO3 NPs) for the selective electrochemical detection of calcium channel antagonists nifedipine

In this work, strontium cerate nanoparticles (SrCeO₃ NPs, SC NPs) were developed through facile synthetic techniques (Ultrasound-Assisted (UA) and Stirring-Assisted (SA) synthesis) and utilized as an electrocatalyst for the selective and sensitive electrochemical detection of calcium channel blocker nifedipine (NDF). The as-prepared UASC NPs and SASC NPs were characterized using XRD, Raman, TEM, EDS, mapping, XPS and BET analysis which exposed the formation of SC NPs in the form of spherical in shape and well crystalline in nature. BET studies reveal that UASC NPs have maximum surface area than that of SASC NPs. Further, the use of the as-developed UASC NPs and SASC NPs as an electrocatalyst for the detection of NDF. Interestingly, the UASC NPs modified screen printed carbon electrode (UASC NPs/SPCE) exhibited an excellent electrocatalytic activity in terms of lower reduction potential and enhanced reduction peak current when compared to SASC NPs and unmodified SPCE. Moreover, as-prepared UASC NPs/SPCE displayed wide linear response range (LR, 0.02-174 µM), lower detection limit (LOD, 5 nM) and good sensitivity (1.31 µA µM^-1 cm^-2) than that of SASC NPs (LR = 0.02-157 µM, LOD = 6.4 nM, sensitivity - 1.27 µA µM^-1cm^-2). Furthermore, UASC NPs/SPCE showed an excellent selectivity even in the existence of potentially co-interfering compounds such as similar functional group containing drugs, pollutants, biological substances and some common cations/anions. The developed sensor was successfully employed for the determination of NDF in real lake water, commercial NDF tablet and urine samples with acceptable recovery.

Ultrasensitive Electrochemical Sensor Based on Polyelectrolyte Composite Film Decorated Glassy Carbon Electrode for Detection of Nitrite in Curing Food at Sub-Micromolar Level

To ensure food quality and safety, developing cost-effective, rapid and precision analytical techniques for quantitative detection of nitrite is highly desirable. Herein, a novel electrochemical sensor based on the sodium cellulose sulfate/poly (dimethyl diallyl ammonium chloride) (NaCS/PDMDAAC) composite film modified glass carbon electrode (NaCS/PDMDAAC/GCE) was proposed toward the detection of nitrite at sub-micromolar level, aiming to make full use of the inherent properties of individual component (biocompatible, low cost, good electrical conductivity for PDMDAAC; non-toxic, abundant raw materials, good film forming ability for NaCS) and synergistic enhancement effect. The NaCS/PDMDAAC/GCE was fabricated by a simple drop-casting method. Electrochemical behaviors of nitrite at NaCS/PDMDAAC/GCE were investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Under optimum conditions, the NaCS/PDMDAAC/GCE exhibits a wide linear response region of 4.0 × 10⁻⁸ mol·L⁻¹~1.5 × 10⁻⁴ mol·L⁻¹ and a low detection 1imit of 43 nmol·L⁻¹. The NaCS/PDMDAAC shows a synergetic enhancement effect toward the oxidation of nitrite, and the sensing performance is much better than the previous reports. Moreover, the NaCS/PDMDAAC also shows good stability and reproducibility. The NaCS/PDMDAAC/GCE was successfully applied to the determination of nitrite in ham sausage with satisfactory results.