Critical Impact of Chloride Containing Reference Electrodes on Electrochemical Measurements

On the mechanism of the bipolar reference electrode

Commercial silver/silver chloride (Ag/AgCl) reference electrodes are some of the most commonly used reference electrodes, but they suffer from a number of issues due to their porous frits. Such issues include difficulty miniaturizing, silver and chloride ion leakage, charge screening effects at low ionic strength, frit drying if left unattended in air, and incompatibility with organic solvents. To solve these issues, we recently designed a reference electrode that is leakless in principle by replacing the porous frit with a sealed, conductive wire, where the ends of the wire are exposed to the reference electrode solution and the working electrode solution. We hypothesized that the reference electrode operated like a closed, bipolar electrochemical cell, and we termed the name bipolar reference electrode (BPRE). Here, we provide evidence that the BPRE can either act as a reference electrode by operating through an ion transfer mechanism via leakage through the imperfect seal, or it can act as a highly stable quasi-reference electrode through a bipolar electron transfer mechanism (BPQRE). Finally, we demonstrate the effectiveness of the BPRE in other types of common electrochemical studies, including chronoamperometry, linear sweep voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy.

Leakless, Bipolar Reference Electrodes: Fabrication, Performance, and Miniaturization

Reference electrodes must maintain a well-defined potential for long periods of time to be useful. The silver/silver chloride (Ag/AgCl) reference electrode is arguably the most widely used reference electrode, but it leaks silver and chloride ions into the sample solution through the porous frit over time. Further, the porous frit makes miniaturization to the micro- and nanoscale challenging. Here, we present an alternative, where the traditional Ag/AgCl reference electrode porous frit is replaced by a conductive wire, preventing ion leakage and allowing miniaturization to the microscale. Charge balance is maintained through a closed bipolar electrochemical mechanism, where faradaic processes occur on each end of the sealed wire. Using the above design, we demonstrate the efficacy of the leakless, bipolar reference electrode (BPRE) and miniaturize it to the microscale (μ-leakless BPRE). Importantly, we demonstrate that leakless and μ-leakless BPREs behave the same as commercial reference electrodes during potentiometric measurements and leakless BPREs perform similarly during voltammetric measurements on ultramicroelectrodes. We demonstrate that the drift during voltammetry using a leakless BPRE on a macroelectrode is slightly more appreciable compared to the drift seen with a commercial reference electrode. We detail design principles for the use of leakless BPREs in nonaqueous solvents and in sealing other conductive materials (e.g., gold and carbon). Using mass spectrometry, we show that the maximum leakage of methylene blue is 0.36 fmol/s, at least 2 orders of magnitude smaller than that of commercial reference electrodes. Finally, we demonstrate the efficacy of using leakless BPREs in potentiometric glucose sensing.

Supercapacitive paper based microbial fuel cell: High current/power production within a low cost design

Microbial fuel cells (MFCs) with paper separators and liquid containing elements were investigated in supercapacitive mode. MFCs (15 mL) in a supercapacitive configuration, consisted of plain wrapped carbon veil anode (negative) and conductive latex cathode (positive). The internal supercapacitor is discharged galvanostatically and is self-recharged as red-ox reactions occur on both electrodes. MFCs were discharged at different current pulses varying from 1 mA to 7 mA. The MFCs had an equivalent series resistance of 41.2 ± 3.5 Ω caused mainly by the cathode. A maximum power of 1.380 ± 0.083 mW (0.092 ± 0.006 mW mL⁻¹) was measured. Durability tests were conducted over 24 h collecting 1000 discharge cycles (0.5 s) and self-recharges (85 s) at a current of 1 mA. Over time the anode potential dropped causing a decline in performance perhaps due to evaporation of liquid from the pyramidal structure. Resistance and apparent capacitance measured during the durability test remained approximately constant during the cycles.

•

Supercapacitor paper-based MFCs are reported for the first time.

•

Galvanostatic discharges at different current pulses (1 mA to 7 mA) were analysed.

•

Equivalent series resistance (ESR) and apparent capacitance (C) were identified.

•

Maximum power achieved was 1.380 ± 0.083 mW (0.092 ± 0.006 mW mL⁻¹).

•

The system stability was investigated through 1000 discharge/self-recharge cycles.