A Highly Sensitive Electrochemiluminescence Choline Biosensor Based on Poly(aniline‐luminol‐hemin) Nanocomposites

Development of an efficient electrochemical sensing platform based on ter-poly(luminol-o-anisidine-o-toluidine)/ZnO/GNPs nanocomposites for the detection of antimony (Sb3+) ions

A poly(luminol-o-anisidine-o-toluidine) terpolymer was synthesized, characterized, and modified with GNPs and ZnO NPs. The nanocomposites were then examined for their electroactivity and potential use as cationic electrochemical sensors for detecting Sb3+ ions in phosphate buffer on the surface of a glassy carbon electrode (GCE). Among the different compositions and the terpolymer, the GCE adapted with the PLAT/ZnO/GNPs-5% nanocomposite displayed the highest current response. The fabricated nanocomposite sensor exhibited high sensitivity, with a value of 21.4177 μA μM-1 cm-2, and a low detection limit of 95.42 pM. The analytical performance of the sensor was evaluated over the linear dynamic range (LDR) of 0.1 nM to 0.01 mM. The proposed sensor is effective in detecting and measuring carcinogenic Sb3+ ions in real environmental samples using an electrochemical approach, making it a promising tool for environmental monitoring.

Double-enhanced sandwich electrochemiluminescence aptasensor based on g-C3N4-Au-luminol nanocomposites and ZnCuS nanosheets for highly sensitive detection of mucin 1

The traditional luminol electrochemiluminescence (ECL) sensing suffers from low signal response and instability issues. Here, an Au/ZnCuS double-enhanced g-C3N4-supported luminol ECL aptasensor is constructed for the sensitive detection of human mucin 1 (MUC1). In this platform, g-C3N4 of a large specific surface area is beneficial to load more luminol illuminants. Au nanoparticles promote the decomposition of H2O2 coreactants to generate more reactive oxygen (•OH and O2•-) intermediates, while ZnCuS can immobilize the aptamer and simultaneously catalyze H2O2 decomposition, realizing the double-wing signal amplification. Under optimal conditions, this sensor shows a good detection capability within 1.0 × 10-4-1.0 × 103 ng mL-1 and a low detection limit of 5.0 × 10-5 ng mL-1, as well as ideal stability, selectivity, and reproducibility. This double-enhanced aptasensor highlights a new signal-enhancement approach for early biomarker detection.

Sensitive Cr3+ sensor based on novel poly(luminol-co-1,8-diaminonaphthalene)/CeO2/MWCNTs nanocomposites

In this study, poly(luminol-co-1,8-diaminonaphthalene) (PLim-DAN) was synthesized and subsequently modified with MWCNTs and CeO2 NPs. The synthesized nanocomposites were analyzed using IR, SEM, TEM, and XRD. Furthermore, a comprehensive set of thermal behavior measurements were taken using TGA/DTG analysis. Next, the electroactivity of the developed nanocomposites was tested as an electrochemical sensor to measure the concentration of Cr3+ ions in phosphate buffers. The GCE adapted with the PLim-DAN/CeO2/CNTs-10% nanocomposite (NC) exhibited the highest current response among the other compositions and copolymers. The fabricated nanocomposite sensor showed high sensitivity, with a value of 19.78 μA μM-1 cm-2, and a low detection limit of 4.80 ± 0.24 pM. The analytical performance was evaluated by plotting a current calibration curve versus the concentration of Cr3+ ions. It was found to be linear (R2 = 0.9908) over the range of 0.1 nM to 0.1 mM, identified as the linear dynamic range (LDR). This electrochemical sensor demonstrated that it could be a useful tool for environmental monitoring by accurately detecting and measuring carcinogenic Cr3+ ions in real-world samples.

Exploiting poly(safranine) and poly(luminol) for sensing applications. A mini review

Sensor applications have captivated numerous scientists in the electroactivity field lately. Between toxic target analytes and biomolecules, many articles investigated the function of the obtained products in sensing utilization and the ability of applying the gained sensor in real sample tests. Safranine and luminol have a unique polymeric constructor combined with different nanomaterials and have been explored as sensors for different analytes through electrochemical and chemical techniques. This work presents the first review of poly(safranine) and poly(luminol) in sensor applications toward assorted analytes. An illustration for the two main types of oxidative polymerization synthetic methods for our targeted compounds has been displayed including chemical and electrochemical techniques. Furthermore, a comprehensive summary for their impressive impact as electrochemical sensors in the last few decades has been additionally introduced.

Safranine and luminol having a unique polymeric constructor combined with different nanomaterials were explored as sensors for different analytes through electrochemical and chemical techniques.