Development of SPQC sensor based on the specific recognition of TAL-effectors for locus-specific detection of 6-methyladenine in DNA

N6-methyladenosine (6mA) plays a pivotal role in diverse biological processes, including cancer, bacterial toxin secretion, and bacterial drug resistance. However, to date there has not been a selective, sensitive, and simple method for quantitative detection of 6mA at single base resolution. Herein, we present a series piezoelectric quartz crystal (SPQC) sensor based on the specific recognition of transcription-activator-like effectors (TALEs) for locus-specific detection of 6mA. Detection sensitivity is enhanced through the use of a hybridization chain reaction (HCR) in conjunction with silver staining. The limit of detection (LOD) of the sensor was 0.63 pM and can distinguish single base mismatches. We demonstrate the applicability of the sensor platform by quantitating 6mA DNA at a specific site in biological matrix. The SPQC sensor presented herein offers a promising platform for in-depth study of cancer, bacterial toxin secretion, and bacterial drug resistance.

Ultrasensitive Detection of Tumor Suppressor Gene Methylation by Piezoelectric Sensing Based on Enrichment of Transcription Activator-Like Effectors

The detection of DNA methylation at cytosine/guanine dinucleotide (CpG) islands in promoter regions of tumor suppressor genes has great potential for early cancer screening, diagnosis, and prognosis monitoring. Nevertheless, achieving accurate, sensitive, cost-effective, and quantitative detection of target methylated DNA remains challenging. Herein, we propose a novel piezoelectric sensor (series piezoelectric quartz crystal (SPQC)) based on transcription activator-like effectors (TALEs) for detecting DNA methylation of Ras association domain family 1 isoform A (RASSF1A) tumor suppressor genes (R-5mC). The sensor employs TALEs-Ni magnetic beads to specifically recognize and separate the R-5mC, thereby improving the detection selectivity. The TALEs-Ni magnetic beads-R-5mC complex is sheared by a nucleic acid enzyme (DNAzyme) to release the single-stranded DNA (ST). ST initiates a catalyzed hairpin assembly (CHA) reaction on the surface of the electrode, which in turn triggers the hybridization chain reaction (HCR) and silver staining for enhanced detection sensitivity. The strategy exhibits a linear response in the detection of R-5mC in the range of 1 fM to 1 nM with a detection limit of 0.79 fM. R-5mC as low as 0.01% can be detected, even in the presence of large numbers of unmethylated DNA. The detection of R-5mC in circulating cell-free DNA (cfDNA) derived from clinical plasma specimens of lung cancer patients yielded satisfactory results.

Dual-signal amplified electrochemical biosensor based on eATRP and PEI for early detection of lung cancer

Carcinoembryonic antigen (CEA), a lung cancer marker with high sensitivity and specificity, plays vital roles in the early diagnosis of lung cancer. In this paper, an electrochemical biosensor for highly sensitive detection of CEA was constructed, which based on dual signal amplification of electrically mediated atom transfer radical polymerization (eATRP) and polyethyleneimine (PEI) for the first time. Firstly, CEA was captured in a specific recognition manner with CEA aptamer 1 (Apt1), which self-assembled on the electrode via "Au-S" bond. After that, CEA aptamer 2-PEI (Apt2-PEI) was recognized by CEA to form an Apt-antigen-Apt sandwich structure. Next, multiple initiation sites were introduced for the eATRP reaction by the amide reaction. Finally, numerous electroactive monomers, ferrocene methacrylate (FMMA), were grafted onto the modified electrode by eATRP. Under the optimized conditions, there was a wide linear detection range of 10^-3 ∼ 10² ng·mL^-1, and the limit of detection (LOD) was 70.17 fg·mL^-1. Compared to other reported sensors, this electrochemical biosensor used a simpler and more environmentally friendly eATRP, and the use of PEI increased the electron transfer rate. Moreover, the biosensor showed superior analytical performance in the clinical serums and has great promise for early lung cancer diagnosis applications.

Development of an MSPQC Nucleic Acid Sensor Based on CRISPR/Cas9 for the Detection of Mycobacterium tuberculosis

Accurate and rapid detection of nucleic acid plays a vital role in the clinical treatment of tuberculosis caused by Mycobacterium tuberculosis (M.TB). However, false-negative and false-positive results caused by base mismatches could affect the detection accuracy. Inspired by the unique property of CRISPR/Cas9, we proposed a new MSPQC M.TB sensor based on the CRISPR/Cas9 system, which can distinguish single-base mismatches in 10 bases from the protospacer adjacent motif (PAM) region. In the proposed sensor, single-stranded DNA on Au interdigital electrodes was used as a capture probe for the target and an initiator for hybridization chain reaction (HCR). HCR was used to generate long double-stranded DNA (dsDNA), which could span the Au interdigital electrodes. CRISPR/Cas9 was used as recognition components to recognize capture/target dsDNA. When the target existed, the capture probe hybridized with the target to form dsDNA, which could be recognized and cut by CRISPR/Cas9. Thus, the DNA connection between electrodes was cut off and resulted in the MSPQC response. When no target existed, the capture probe remained single-stranded and could not be recognized and cut by CRISPR/Cas9. Therefore, DNA connection between electrodes was reserved. Moreover, silver staining technology was utilized to improve the sensitivity of detection. M.TB was detected by the proposed sensor using specific sequence fragments of 16S rRNA of M.TB as the target. The detection time was down to 2.3 h. The limit of detection (LOD) was 30 CFU/mL.

CuBr2/EDTA-mediated ATRP for ultrasensitive fluorescence detection of lung cancer DNA

In this paper, we reported a system for the ultrasensitive fluorescence detection of cytokeratin fragment antigen 21-1 DNA (CYFRA21-1 DNA) for the early diagnosis of lung cancer. The approach used electron transfer atom transfer radical polymerization (ARGET-ATRP) with ethylenediaminetetraacetic acid (EDTA) as the metal ligand. Firstly, thiolated peptide nucleic acid (PNA) was linked to aminated magnetic beads solutions (MBs) by a cross-linking agent and then hybridized with CYFRA21-1 DNA (tDNA). Subsequently, Zr4+ was introduced into the MBs by conjugating with the phosphate group of tDNA, and the initiator of ARGET-ATRP was introduced into via phosphate-Zr4+-carboxylate chemistry. Next, Cu(II)Br/EDTA was reduced to Cu(I)/EDTA by ascorbic acid (AA) to trigger ARGET-ATRP and then a large amount of fluorescein-o-acrylate (FA) molecules were grafted from the surface of the MBs, which amplified significantly the fluorescent signal. Under optimal conditions, a strong linear relationship of tDNA over the range from 0.1 fM to 1 nM (R2 = 0.9988). The limit of detection was as low as 23.8 aM (~143 molecules). The fluorescence detection based on the ARGET-ATRP strategy yielded excellent sensitivity, selectivity, outstanding anti-interference properties, and cost-effectiveness. These results indicated that this strategy has considerable potential for biological detection and early clinical diagnosis.

Polysaccharide-enhanced ARGET ATRP signal amplification for ultrasensitive fluorescent detection of lung cancer CYFRA 21-1 DNA

An ultrasensitive fluorescence biosensor for detecting cytokeratin fragment antigen 21-1 (CYFRA 21-1) DNA of non-small cell lung carcinoma (NSCLC) is designed using polysaccharide and activator regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) signal amplification strategy. Thiolated peptide nucleic acid (PNA) is fixed on magnetic nanoparticles (MNPs) by a cross-linking agent and hybridized with CYFRA 21-1 DNA. Hyaluronic acid (HA) is linked to PNA/tDNA heteroduplexes in the form of carboxy-Zr⁴⁺-phosphate. Subsequently, multiple 2-bromo-2-methylpropionic acid (BMP) molecules are linked with HA to initiate ARGET ATRP reaction. Finally, a large number of fluorescein o-acrylate (FA) monomers are polymerized on the macro-initiators, and the fluorescence signal is significantly amplified. Under optimal conditions, this biosensor shows a significant linear correlation between the fluorescence intensity and logarithm of CYFRA 21-1 DNA concentration (0.1 fM to 0.1 nM), and the limit of detection is as low as 78 aM. Furthermore, the sensor has a good ability to detect CYFRA 21-1 DNA in serum samples and to recognize mismatched bases. It suggests that the strategy has broad application in early diagnosis by virtue of its high sensitivity and selectivity. Graphical abstract A novel and highly sensitive fluorescence biosensor for quantitatively detecting CYFRA 21-1 DNA via dual signal amplification of hyaluronic acid and ARGET ATRP reaction was developed. This proposed method has a low detection limit, wide detection range, high selectivity, and strong anti-interference.