Facile Non‐enzymatic Lactic Acid Sensor Based on Cobalt Oxide Nanostructures

A polymer dot-based NADH-sensitive electrochemiluminescence biosensor for analysis of metabolites in serum

Nicotinamide adenine dinucleotide (NADH) plays a pivotal role in metabolism. Convenient detection of NADH and its related metabolites has the pursuit of point-of-care and clinical analysis. Here, we propose a polymer dots (Pdots)-based NADH-sensitive electrochemiluminescence (ECL) biosensor for detection of NADH and three metabolites. Pdots acted as the efficient ECL emitters without additional modification to construct this biosensor. Specially, NADH both acted as the final detection target and at the same time as the bio-coreactants to sensitively influence the ECL intensities, in which NADH was generated or consumed in the presence of the target analyte and their specific enzyme. For glucose and lactic acid detection, NAD+ was reduced to NADH to generate an enhanced ECL signal. Conversely, for pyruvate detection, NADH was consumed to further decrease the ECL. The designed Pdots-based ECL biosensor showed wide detection ranges, high selectivity and low limits of detection of 4.6 μM, 0.7 μM and 0.5 μM for the analysis of three analytes, respectively. This strategy was successfully applied in quantifying the concentrations of glucose, lactic acid and pyruvate in human serum, which also has the potential to be implemented as a powerful and fast tool for ECL sensing of NADH and other related metabolites for point-of-care use and disease monitoring.

Au-Pt-Ni nanochains as dopamine catalysts: role of elements and their spatial distribution

Multi-element materials can improve biosensing ability as each element can catalyze different steps in a reaction pathway. By combining Pt and Ni on self-assembled 1D gold nanochains and controlling their spatial distribution, a detailed understanding of each element's role in dopamine oxidation is developed. In addition, the developed synthesis process provides a simple way to fabricate multi-element composites for electrocatalytic applications based on electrical double-layer formation on the surface of charged nanoparticles. The performance parameters of the catalyst, such as its sensitivity, limit of detection, and range of operation for dopamine sensing, are optimized by changing the relative ratios of Pt : Ni and the morphology of the Pt and Ni domains, using the developed understanding. The morphology of the domains also affects the oxidation state of Ni, which is crucial to the performance of the electrocatalyst.

Highly Sensitive Electrochemical Non-Enzymatic Uric Acid Sensor Based on Cobalt Oxide Puffy Balls-like Nanostructure

Early-stage uric acid (UA) abnormality detection is crucial for a healthy human. With the evolution of nanoscience, metal oxide nanostructure-based sensors have become a potential candidate for health monitoring due to their low-cost, easy-to-handle, and portability. Herein, we demonstrate the synthesis of puffy balls-like cobalt oxide nanostructure using a hydrothermal method and utilize them to modify the working electrode for non-enzymatic electrochemical sensor fabrication. The non-enzymatic electrochemical sensor was utilized for UA determination using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The puffy balls-shaped cobalt oxide nanostructure-modified glassy carbon (GC) electrode exhibited excellent electro-catalytic activity during UA detection. Interestingly, when we compared the sensitivity of non-enzymatic electrochemical UA sensors, the DPV technique resulted in high sensitivity (2158 µA/mM.cm²) compared to the CV technique (sensitivity = 307 µA/mM.cm²). The developed non-enzymatic electrochemical UA sensor showed good selectivity, stability, reproducibility, and applicability in the human serum. Moreover, this study indicates that the puffy balls-shaped cobalt oxide nanostructure can be utilized as electrode material for designing (bio)sensors to detect a specific analyte.

Recent Advances in Wearable Biosensors for Non-Invasive Detection of Human Lactate

Lactate, a crucial product of the anaerobic metabolism of carbohydrates in the human body, is of enormous significance in the diagnosis and treatment of diseases and scientific exercise management. The level of lactate in the bio-fluid is a crucial health indicator because it is related to diseases, such as hypoxia, metabolic disorders, renal failure, heart failure, and respiratory failure. For critically ill patients and those who need to regularly control lactate levels, it is vital to develop a non-invasive wearable sensor to detect lactate levels in matrices other than blood. Due to its high sensitivity, high selectivity, low detection limit, simplicity of use, and ability to identify target molecules in the presence of interfering chemicals, biosensing is a potential analytical approach for lactate detection that has received increasing attention. Various types of wearable lactate biosensors are reviewed in this paper, along with their preparation, key properties, and commonly used flexible substrate materials including polydimethylsiloxane (PDMS), polyethylene terephthalate (PET), paper, and textiles. Key performance indicators, including sensitivity, linear detection range, and detection limit, are also compared. The challenges for future development are also summarized, along with some recommendations for the future development of lactate biosensors.

Electrochemical Ultrasensitive Sensing of Uric Acid on Non-Enzymatic Porous Cobalt Oxide Nanosheets-Based Sensor

Transition metal oxide (TMO)-based nanomaterials are effectively utilized to fabricate clinically useful ultra-sensitive sensors. Different nanostructured nanomaterials of TMO have attracted a lot of interest from researchers for diverse applications. Herein, we utilized a hydrothermal method to develop porous nanosheets of cobalt oxide. This synthesis method is simple and low temperature-based. The morphology of the porous nanosheets like cobalt oxide was investigated in detail using FESEM and TEM. The morphological investigation confirmed the successful formation of the porous nanosheet-like nanostructure. The crystal characteristic of porous cobalt oxide nanosheets was evaluated by XRD analysis, which confirmed the crystallinity of as-synthesized cobalt oxide nanosheets. The uric acid sensor fabrication involves the fixing of porous cobalt oxide nanosheets onto the GCE (glassy carbon electrode). The non-enzymatic electrochemical sensing was measured using CV and DPV analysis. The application of DPV technique during electrochemical testing for uric acid resulted in ultra-high sensitivity (3566.5 µAmM^-1cm^-2), which is ~7.58 times better than CV-based sensitivity (470.4 µAmM^-1cm^-2). Additionally, uric acid sensors were tested for their selectivity and storage ability. The applicability of the uric acid sensors was tested in the serum sample through standard addition and recovery of known uric acid concentration. This ultrasensitive nature of porous cobalt oxide nanosheets could be utilized to realize the sensing of other biomolecules.

What Is Left for Real-Life Lactate Monitoring? Current Advances in Electrochemical Lactate (Bio)Sensors for Agrifood and Biomedical Applications

Monitoring of lactate is spreading from the evident clinical environment, where its role as a biomarker is notorious, to the agrifood ambit as well. In the former, lactate concentration can serve as a useful indicator of several diseases (e.g., tumour development and lactic acidosis) and a relevant value in sports performance for athletes, among others. In the latter, the spotlight is placed on the food control, bringing to the table meaningful information such as decaying product detection and stress monitoring of species. No matter what purpose is involved, electrochemical (bio)sensors stand as a solid and suitable choice. However, for the time being, this statement seems to be true only for discrete measurements. The reality exposes that real and continuous lactate monitoring is still a troublesome goal. In this review, a critical overview of electrochemical lactate (bio)sensors for clinical and agrifood situations is performed. Additionally, the transduction possibilities and different sensor designs approaches are also discussed. The main aim is to reflect the current state of the art and to indicate relevant advances (and bottlenecks) to keep in mind for further development and the final achievement of this highly worthy objective.

A non-enzymatic electrochemical sensor composed of nano-berry shaped cobalt oxide nanostructures on a glassy carbon electrode for uric acid detection

Non-enzymatic electrochemical uric acid sensor fabrication with excellent performance using nano-berry shaped cobalt oxide nanostructures on a glassy carbon electrode.

Hollow sphere nickel sulfide nanostructures-based enzyme mimic electrochemical sensor platform for lactic acid in human urine

An enzyme-free electrochemical sensor platform is reported based on hollow sphere structured nickel sulfide (HS-NiS) nanomaterials for the sensitive lactic acid (LA) detection in human urine. Hollow sphere nickel sulfide nanostructures directly grow on the nickel foam (NiF) substrate by using facile and one-step electrochemical deposition strategy towards the electrocatalytic lactic acid oxidation and sensing for the first time. The as-developed nickel sulfide nanostructured electrode (NiF/HS-NiS) has been successfully employed as the enzyme mimic electrode towards the enhanced electrocatalytic oxidation and detection of lactic acid. The NiF/HS-NiS electrode exhibits an excellent electrocatalytic activity and sensing ability with low positive potential (~ 0.52 V vs Ag/AgCl), catalytic current density (~ 1.34 mA), limit of detection (LOD) (0.023 μM), linear range from 0.5 to 88.5 μM with a correlation coefficient of R² = 0.98, sensitivity (0.655 μA μM^-1 cm^-2), and selectivity towards the lactic acid owing to the ascription of high inherent electrical conductivity, large electrochemical active surface area (ECASA), high electrochemical active sites, and strong adsorption ability. The sensors developed in this work demonstrate the selectivity against potential interferences, including uric acid (UA), ascorbic acid (AA), paracetamol (PA), Mg²⁺, Na⁺, and Ca²⁺. Furthermore, the developed sensors show practicability by sensing lactic acid in human urine samples, suggesting that the HS-NiS nanostructures device has promising clinical diagnostic potential. Graphical abstract.