Electroanalytical Determination of Cd(II) and Pb(II) in Bivalve Mollusks using Electrochemically Reduced Graphene Oxide‐based Electrode

Mesoporous carbon decorated with MIL-100(Fe) as an electrochemical platform for ultrasensitive determination of trace cadmium and lead ions in surface water

In this work, MIL-100(Fe)-decorated mesoporous carbon powders (MC@MIL-100(Fe)) were prepared by in situ growth of MIL-100(Fe) on the surface of ZIF-8 framework-based mesoporous carbons (MC). The hybrid material was characterized using SEM equipped with EDS mapping for morphology investigation, X-ray photoelectron spectroscopy for chemical valence analysis, and X-ray diffraction for crystal structure determination. The developed sensor separated from the traditional bismuth film decoration, and simultaneously, MC@MIL-100(Fe) was applied for the first time to electrochemically detect trace amounts of Pb(II) and Cd(II). The fabricated MC@MIL-100(Fe)-based electrochemical sensor showed excellent response to the target analytes at -0.55 and - 0.75 V for lead and cadmium ions, respectively. By adjusting some measurement parameters, that is, the loading concentration of MC@MIL-100(Fe), acidity of the HAc-NaAc buffer (ABS), deposition potential, and deposition time, the analytical performance of the proposed electrochemical sensor was examined by exploring the calibration curve, repeatability, reproducibility, stability, and anti-interference under optimized conditions. The response current of the proposed MC@MIL-100(Fe) electrochemical sensor showed a well-defined linear relationship in the concentration ranges of 2-250 and 2-270 μg·L^-1 for Cd(II) and Pb(II), respectively. In addition, the detection limits of the sensor for Cd(II) and Pb(II) were 0.18 and 0.15 μg L^-1, respectively, which are well below the World Health Organization (WHO) drinking water guideline value. The MC@MIL-100(Fe) can be potentially used as an electrochemical platform for monitoring heavy metals in surface water, with satisfactory results.

Application of Graphene and its Derivatives in Detecting Hazardous Substances in Food: A Comprehensive Review

Graphene and its derivatives have been a burning issue in the last 10 years. Although many reviews described its application in electrochemical detection, few were focused on food detection. Herein, we reviewed the recent progress in applying graphene and composite materials in food detection during the past 10 years. We pay attention to food coloring materials, pesticides, antibiotics, heavy metal ion residues, and other common hazards. The advantages of graphene composites in electrochemical detection are described in detail. The differences between electrochemical detection involving graphene and traditional inherent food detection are analyzed and compared in depth. The results proved that electrochemical food detection based on graphene composites is more beneficial. The current defects and deficiencies in graphene composite modified electrode development are discussed, and the application prospects and direction of graphene in future food detection are forecasted.

Novel Aminosilane (APTES)-Grafted Polyaniline@Graphene Oxide (PANI-GO) Nanocomposite for Electrochemical Sensor

Lead is a potentially toxic element (PTE) that has several adverse medical effects in humans. Its presence in the environment became prominent due to anthropogenic activities. The current study explores the use of newly developed composite materials (organic-inorganic hybrid) based on PANI-GO-APTES for electrochemical detection of Pb²⁺ in aqueous solution. The composite material (PANI-GO-APTES) was synthesized by chemical method and was characterized with SEM, XPS, XEDS, XRD, TGA, FTIR, EIS and CV. The result of characterization indicates the successful synthesis of the intended material. The PANI-GO-APTES was successfully applied for electrochemical detection of Pb²⁺ using cyclic voltammetry and linear sweep voltammetry method. The limit of detection of Pb²⁺ was 0.0053 µM in the linear range of 0.01 µM to 0.4 µM. The current response produced during the electrochemical reduction of Pb²⁺ catalyzed by PANI-GO-APTES was also very repeatable, reproducible and rapid. The application of PANI-GO-APTES-modified GCE in real sample analysis was also established. Therefore, PANI-GO-APTES is presented as a potential Pb²⁺ sensor for environmental and human health safety.

A simple graphene modified electrode for the determination of antimony(III) in edible plants and beverage

Antimony(III) is a rare electroactive specie present on Earth, whose concentration is not typically determined. The presence of high concentrations of antimony is responsible for a variety of diseases, which makes it desirable to find convenient and reliable methods for its determination. We have developed a convenient glassy carbon modified electrode with electroreduced graphene oxide GC/rGO for the first time determination of Sb(III) in commercial lettuce, celery, and beverages. The surface of the electrode was characterized by scanning electron microscopy (SEM) and cyclic voltammetry, indicating a heterogeneous and rough surface with a real area of 0.28 cm², which is ~2.5 times the area of GC. The optimal chemical and electrochemical parameters used were: sodium acetate buffer (pH = 4.3), an accumulation potential of -1.0 V and an accumulation time of 150 s. The analytical validation was developed evaluating the linear range (10-60 µg L^-1), limit of detection (2.5 µg L^-1), accuracy, repetibility and reproducibility with satisfactory results (relative standard deviation (RSD) values lower than 10%). All the analyzes performed in real samples by stripping voltammetry were compared with GF-AAS, showing statistically similar values, demonstrating that GC/rGO could be effectively applied in the analysis of food samples.

Inexpensive and green electrochemical sensor for the determination of Cd(II) and Pb(II) by square wave anodic stripping voltammetry in bivalve mollusks

An inexpensive and environmental friendly electrochemical sensor based on a glassy carbon electrode (GC) modified with graphene quantum dots (GQDs) and Nafion (NF) has been developed for the determination of Cd(II) and Pb(II) in bivalve mollusks using square wave anodic stripping voltammetry (SWASV). GQDs were characterized by UV-Vis spectroscopy, fluorescence and transmission electronic microscopy (TEM). The modified electrode was evaluated by cyclic voltammetry, scanning electronic microscopy (SEM) and electrochemical impedance spectroscopy (EIS). A linearity of 20-200 μg L^-1 was found, with a limit of detection (LOD) of 11.30 μg L^-1 for Cd(II) and 8.49 μg L^-1 for Pb(II). The proposed methodology was validated with a certified reference material TMDA-64.2. The reproducibility of GC/GQDs-NF for both species had an RSD of less than 10%. The results were compared with ICP-OES. The method was applied in the determination of Cd(II) and Pb(II) in bivalve mollusks samples with excellent results.