S(O)MWCNT/modified Carbon Paste – A Non‐enzymatic Amperometric Sensor for Direct Determination of 6‐Mercaptopurine in Biological Fluids

Electrocatalytic barium-oxide decorated MWCNT amperometric sensor for the quantification of anesthetic drug Procaine

Procaine hydrochloride (P.HCl) is one of the earliest and most well-established local anesthetic drugs used in medicine. Though it is employed frequently for effective clinical nerve blocks during surgeries, its immoderate administration has often shown reports of systemic toxicity. To prevent such repercussions, developing a sensor for the drug is crucial to enable real-time monitoring of the drug and assist in quality control procedures during its industrial preparations. Thus, in this work, we have fabricated a simple yet highly selective and sensitive amperometric sensor for P.HCl detection based on a Barium-oxide multi-wall carbon nanotube-modified carbon paste electrode (BaO-MWCNT/CPE). Herein, we have adopted a novel approach devoid of sophisticated procedures and pretreatments for rapidly determining P.HCl. Furthermore, experimental conditions, including supporting electrolytes, pH, and scan rate, were optimized to achieve a well-defined P.HCl anodic peak current at 631 mV, which is lower than the previously reported peak potentials, indicating an advantage of reduced overpotential. Besides, a striking 66-fold rise in current responsiveness to P.HCl was achieved upon modification with BaO-MWCNT. Such an intense signal enhancement upon electrode modification compared to bare CPE was due to the strong electrocatalytic feature of BaO-MWCNT, which was verified using surface morphology studies with scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). Additionally, the charge transfer kinetics analyzed via electrochemical impedance spectroscopy (EIS) justified the enhancement of electrocatalytic activity upon electrode modification. The developed sensor exhibited a remarkable analytical performance over a wide linear dynamic range of 2.0-100.0 µM with a detection limit of 0.14 µM. Moreover, a significant merit of this sensor is its excellent selectivity towards P.HCl even in the presence of various common interferants. Finally, the versatility of the sensor was further validated by implementing it for the trace analysis of urine and blood serum real samples.

An amperometric sensor composed of carbon hybrid-structure for the degradation of aminotriazole herbicide

The use of the herbicide aminotriazole (3-ATA) in agriculture poses rising concerns about global water-borne contamination. Due to its toxicity which is known to cause cancer and thyroid dysfunction, 3-ATA is considered an important analytical target. Environmental protection agencies worldwide have introduced several directives that set concentration limits for chemicals to combat water pollution. Hence, to evaluate the presence of 3-ATA in water and limit their impact on ecosystems and human health, the development of an efficient real-time monitoring device is the key. The as-synthesized copper oxide decorated multiwall carbon nanotubes at 400 °C (CuO-MWCNT@400) showed remarkable efficiency as modifiers. Under optimal conditions, we explored the direct oxidation of 3-ATA at CuO-MWCNT@400 modified carbon paste electrode (MCPE). With its distinguishing synergistic features like high levels of porosity, stability, and surface area, this structure favoured greater detection, selectivity, and sensitivity. The amperometric i-t curve technique was adopted for the first time for 3-ATA quantification. This technique rendered a good detection sensitivity of 1.65 × 10^-8 mol L^-1 and anti-interference characteristics for several interferent species, including fungicides, fertilizers, herbicides, inorganic ions, and carbohydrates. Finally, the proof-of-concept was yielded by selective and sensitive detection of 3-ATA from two different samples of spiked water. We believe this work will enhance awareness and garner appreciation of the electrochemical sensor's analytical performance in protecting our environment and water resources.

Magnetic nanoparticles based on cerium MOF supported on the MWCNT as a fluorescence quenching sensor for determination of 6-mercaptopurine

In this study, a new magnetic nanocomposite was developed as an efficient and fast-response fluorescence quenching sensor for determination of anticancer drug 6-mercaptopurine (6-MP). For this purpose, the needle-shape fluorescence metal-organic framework of cerium (Ce-MOF) were successfully synthesized on the surface of multiwalled carbon nanotubes using 1,3,5-benzenetricarboxylic acid ligand via a facile solvothermal assisted route and magnetized. The accuracy of the proposed synthesis was confirmed using the FT-IR, FE-SEM, XRD, and VSM methods. The obtained product as presented the fluorescence emission in 331 nm by excitation of 293 nm in excitation/emission slit widths of 10.0 nm. The operation of suggested method is based on quenching the fluorescence signal in accordance with increasing the 6-MP concentration. The proposed assay effectively detected the trace amount of 6-MP in the linear range of 1.0 × 10^-6 to 7 × 10^-5 M. The limit of detection and limit of quantification were obtained as 8.6 × 10^-7 and 2.86 × 10^-6 M, respectively. The analyte molecule was determined in real samples with satisfactory recoveries between 98.75 and 105.33.

Biomarkers for Early Diagnosis of Ovarian Carcinoma

The leading cause of gynecological cancer-related morbidity and mortality is ovarian cancer (OC), which is dubbed a silent killer. Currently, OC is a target of intense biomarker research, because it is often not discovered until the disease is advanced. The goal of OC research is to develop effective tests using biomarkers that can detect the disease at the earliest stages, which would eventually decrease the mortality, thereby preventing recurrence. Therefore, there is a pressing need to revisit the existing biomarkers to recognize the potential biomarkers that can lead to efficient predictors for the OC diagnosis. This Perspective covers an update on the currently available biomarkers used in the triaging of OC to gain certain insights into the potential role of these biomarkers and their estimation that are crucial to the understanding of neoplasm progression, diagnostics, and therapy.

Skin Patchable Sensor Surveillance for Continuous Glucose Monitoring

Diabetes mellitus is a physiological and metabolic disorder affecting millions of people worldwide, associated with global morbidity, mortality, and financial expenses. Long-term complications can be avoided by frequent, continuous self-monitoring of blood glucose. Therefore, this review summarizes the current state-of-art glycemic control regimes involving measurement approaches and basic concepts. Following an introduction to the significance of continuous glucose sensing, we have tracked the evolution of glucose monitoring devices from minimally invasive to non-invasive methods to present an overview of the spectrum of continuous glucose monitoring (CGM) technologies. The conveniences, accuracy, and cost-effectiveness of the real-time CGM systems (rt-CGMs) are the factors considered for discussion. Transdermal biosensing and drug delivery routes have recently emerged as an innovative approach to substitute hypodermal needles. This work reviews skin-patchable glucose monitoring sensors for the first time, providing specifics of all the major findings in the past 6 years. Skin patch sensors and their progressive form, i.e., microneedle (MN) array sensory and delivery systems, are elaborated, covering self-powered, enzymatic, and non-enzymatic devices. The critical aspects reviewed are material design and assembly techniques focusing on flexibility, sensitivity, selectivity, biocompatibility, and user-end comfort. The review highlights the advantages of patchable MNs' multi-sensor technology designed to maintain precise blood glucose levels and administer diabetes drugs or insulin through a "sense and act" feedback loop. Subsequently, the limitations and potential challenges encountered from the MN array as rt-CGMs are listed. Furthermore, the current statuses of working prototype glucose-responsive "closed-loop" insulin delivery systems are discussed. Finally, the expected future developments and outlooks in clinical applications are discussed.

High performance electrochemical method for simultaneous determination dopamine, serotonin, and tryptophan by ZrO2-CuO co-doped CeO2 modified carbon paste electrode

In this research, a paste containing ZrO₂-CuO-CeO₂ ternary nanocomposite and graphene (Gr) was used in constructing a carbon paste sensor for monitoring biomolecules including dopamine (Dop), serotonin (Ser) and tryptophan (Trp). The scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) were utilized for ZrO₂-CuO-CeO₂ ternary nanocomposite characterization. The obtained data show that, the ZrO2-CuO-CeO₂/Gr and synergetic effect of using these three-metal oxide nanoparticles, could effectively improve the electron transfer kinetic and exhibit a high electrocatalytic activity, making it serve as a powerful tool for biomolecules analysis. The differential pulse (DP) and cycle voltammetry (CV) methods were applied for investigating electrochemical treatment of the analytes. In comparison to all of the previous voltammetric reports, this research has the lowest detection limit and widest linear range. The calibration curves in the optimum conditions were linear over the range of 0.008-7.2 and 7.2-185 μM for Dop, 0.008-7.9 and 7.9-205 μM for Ser and 0.009-8.6 and 8.6-194 μM for Trp. The calculated limit of detection (LOD) was 3.09, 3.49 and 5.32 nM for Dop, Ser and Trp, respectively. The applicability of this sensing device was tested by monitoring Dop, Ser and Trp in the human urine and plasma samples. The recovery percentage of the analysis in the real samples was between 95.6 and 104.74; also, the data of determination of Dop, Ser and Trp with ZrO₂-CuO-CeO₂/Gr/CPE was well close to HPLC data. The obtained result demonstrates that the ZrO₂-CuO-CeO₂/Gr/CPE has good selectivity, stability, reproducibility, and repeatability, and can be used for the routine analysis of Dop, Ser and Trp.

A facile fabrication of a hierarchical ZIF-8/MWCNT nanocomposite for the sensitive determination of rutin

In this paper, a novel type of zeolitic imidazolate framework-8 (ZIF-8) polyhedron/multi-walled carbon nanotube (MWCNT) modified electrode was successfully prepared for effective on-site detection of rutin. The morphology and microstructure of the ZIF-8/MWCNT nanocomposite were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The electrochemical performance of the ZIF-8/MWCNT based electrode for the determination of rutin was studied by cyclic voltammetry (CV) and differential pulse stripping voltammetry (DPV). The as-prepared sensor illustrates better electrocatalytic activity and lower background current than the MWCNT modified electrode for the oxidation of rutin. Besides, the ZIF-8/MWCNTs sensor offers a remarkable linear response for rutin concentrations from 0.1 to 15 μM. The detection limit (LOD) was calculated to be 0.26 nM (S/N = 3). Also, the ZIF-8/MWCNT electrode showed high anti-interference ability towards common interfering species. More importantly, the fabricated electrode was quickly evaluated for determination of rutin in medicine tablets with satisfactory recoveries and the obtained results successfully achieved good consistency with the data from high performance liquid chromatography (HPLC). Finally, the method shows an enhanced electrocatalytic property and sensitivity for the analysis of rutin, which may provide an economical and promising electrochemical sensor for practical on-site detection of rutin.

A screen printed electrode modified with Fe3O4@polypyrrole-Pt core-shell nanoparticles for electrochemical detection of 6-mercaptopurine and 6-thioguanine

In this paper, Fe₃O₄@ppy-Pt core-shell nanoparticles (NPs) could be produced and utilized for the development of a novel electrochemical sensor to detect 6-mercaptopurine (6-MP). 6-MP determination was examined by cyclic voltammetry (CV), chronoamperometry (CHA), linear sweep voltammetry (LSV), and differential pulse voltammetry (DPV) at Fe₃O₄@ppy-Pt core-shell NPs modified screen printed electrode (Fe₃O₄@ppy-Pt/SPE) in phosphate buffered solution (PBS). The outcomes obtained from DPV demonstrated that the Fe₃O₄@ppy-Pt/SPE proved a linear concentration range among 0.04 and 330.0 μM having a detection limit of 10.0 nM for 6-MP. Also, modified electrode was satisfactorily utilized to detect 6-MP in the presence of 6-thioguanine (6-TG). This sensor showed two separate oxidative peaks at 530 mV for 6-MP and at 730 mV for 6-TG with a peak potential separation of 200 mV which was large enough for simultaneous detection of the two anticancer drugs. In addition, the proposed sensor presented long-term stability, good repeatability, and excellent reproducibility. Finally, the modified electrode demonstrated satisfactory outcomes while used in real samples, proposing the appropriate potential of Fe₃O₄@ppy-Pt/SPE in the case of clinical diagnosis, biological samples and pharmaceutical compounds analysis.