Copper Based Organic Framework Modified Electrosensor for Selective and Sensitive Detection of Ciprofloxacin

Bacteria Contaminants Detected by Organic Inverter-Based Biosensors

The importance of bacteria detection lies in its role in enabling early intervention, disease prevention, environmental protection, and effective treatment strategies. Advancements in technology continually enhance the speed, accuracy, and sensitivity of detection methods, aiding in addressing these critical issues. This study first reports the fabrication of an inverter constructed using crosslinked-poly(4-vinylphenol) (C-PVP) as the dielectric layer and an organic complementary metal-oxide semiconductor (O-CMOS) based on pentacene and N,N'-ditridecylperylene-3,4,9,10-tetracarboxylic diimide (PTCDI-C13) as a diagnostic biosensor to rapidly detect bacterial concentration. Bacteria including Escherichia coli O157, Staphylococcus aureus ATCC25922, and Enterococcus faecalis SH-1051210 were analysed on the inverters at an ultra-low operating voltage of 2 V. The high density of negative charge on bacteria surfaces strongly modulates the accumulated negative carriers within the inverter channel, resulting in a shift of the switching voltage. The inverter-based bacteria sensor exhibits a linear-like response to bacteria concentrations ranging from 102 to 108 CFU/mL, with a sensitivity above 60%. Compared to other bacterial detectors, the advantage of using an inverter lies in its ability to directly read the switching voltage without requiring an external computing device. This facilitates rapid and accurate bacterial concentration measurement, offering significant ease of use and potential for mass production.

Bimetallic metal organic framework/Ni doped ZnO nanomaterials modified carbon paste electrode for selective electrochemical determination of ciprofloxacin

In this work, an efficient and sensitive electrochemical sensor for the determination of ciprofloxacin (CIP) is reported. The sensor was prepared by using a carbon paste electrode (CPE) modified with a combination of bimetallic copper/cerium-based metal organic framework (Cu/Ce-MOF) and nickel doped zinc oxide nanoparticles (NZP). The modifiers were characterized by Brunauer-Emmett-Teller (BET) analysis, Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and elemental mapping analysis (EDS). The electrochemical behavior of the modified electrode was studied by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The developed electrode was employed for the detection of CIP by differential pulse voltammetry (DPV). Under optimal conditions, the anodic peak current response of the electrode was linearly correlated with CIP concentration in the range of 0.75-100 μmol L-1 with a sensitivity of 1.29 μA μmol-1 L-1. The limit of detection and reproducibility of the method were 0.142 μmol L-1 and 2.7%, respectively. The developed sensor showed good selectivity to CIP against possible interferents. The method was applied to determine CIP in water, milk and urine samples. The results indicated that this method has potential to be applied in the analysis of residue CIP in complex matrices with high selectivity, and good reproducibility.

Visual fluorescence detection of ciprofloxacin by Zn-metal-organic framework@nanocellulose transparent films based on aggregation-induced emission

The invention and production of Ciprofloxacin (CIP) have a positive impact on medical treatment, but the overuse of CIP is also harmful to the environment. In this paper, we prepared a novel film material for detection of CIP by in situ synthesis of zinc-based metal-organic framework (Zn-BDC) on TEMPO-oxidized cellulose nanofibers (TOCNF). The nanoscale Zn-BDC were uniformly distributed on the TOCNF that was beneficial to realize the transparency and functionality of Zn-BDC@TOCNF whose transparency was up to 87 %. Zn-BDC@TOCNF showed no fluorescence itself while showed bright fluorescence upon the contact of CIP, which was proposed as the aggregation-induced emission (AIE) of CIP that defused and assembled in the Zn-BDC@TOCNF. There was a certain linear relationship between fluorescence intensity and concentration of CIP (R2 = 0.994, LOD = 0.083 μM). In the detection process, CIP could still fluoresce in Zn-BDC@TOCNF even if it was interfered by other ions and small biological molecules, and the weak acid environment was conducive to AIE of CIP. Generally, it was of great significance to establish a rapid and effective monitoring mechanism for CIP in water for environmental protection and ecological balance.

Electrochemical Sensor Based on the Hierarchical Carbon Nanocomposite for Highly Sensitive Ciprofloxacin Determination

A new voltammetry method for the highly sensitive antibacterial drug ciprofloxacin (CIP) is presented using glassy carbon electrodes modified with hierarchical electrospun carbon nanofibers with NiCo nanoparticles (eCNF/CNT/NiCo-GCE). The use of a modified glassy carbon electrode in the form of hierarchical electrospun carbon nanofibers with NiCo nanoparticles (eCNF/CNT/NiCo) led to an LOD value as low as 6.0 µmol L-1 with a measurement sensitivity of 3.33 µA µmol L-1. The described procedure was successfully applied for CIP determination in samples with complex matrices, such as urine or plasma, and also in pharmaceutical products and antibiotic discs with satisfactory recovery values ranging between 94-104%. The proposed electrode was characterised by great stability, with the possibility of use for about 4 weeks without any significant change in the CIP peak current. The repeatability of the CIP response on the eCNF/CNT/NiCo/GC is also very good; its value measured and expressed as RSD is equal to 2.4% for a CIP concentration of 0.025 µmol L-1 (for 7 consecutive CIP voltammogram registrations). The procedure for electrode preparation is quick and simple and does not involve the use of expensive apparatus.

Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

Increasing trace levels of antibiotics and hormones in the environment and food samples are concerning and pose a threat. Opto-electrochemical sensors have received attention due to their low cost, portability, sensitivity, analytical performance, and ease of deployment in the field as compared to conventional expensive technologies that are time-consuming and require experienced professionals. Metal-organic frameworks (MOFs) with variable porosity, active functional sites, and fluorescence capacity are attractive materials for developing opto-electrochemical sensors. Herein, the insights into the capabilities of electrochemical and luminescent MOF sensors for detection and monitoring of antibiotics and hormones from various samples are critically reviewed. The detailed sensing mechanisms and detection limits of MOF sensors are addressed. The challenges, recent advances, and future directions for the development of stable, high-performance MOFs as commercially viable next-generation opto-electrochemical sensor materials for the detection and monitoring of diverse analytes are discussed.

Recent trends on electrochemical determination of antibiotic Ciprofloxacin in biological fluids, pharmaceutical formulations, environmental resources and foodstuffs: Direct and indirect approaches

In the last few decades, pharmaceuticals, credited with saving millions of lives, have emerged as a new class of environmental contaminants. These compounds can have both chronic and acute harmful effects on aquatic ecosystems and consequently on human health. Therefore, there is an urgent need for the development of extremely sensitive, portable, and low-cost devices to perform analysis. In the present review article, recent reports on the application of various voltammetric and photo-electrochemical techniques using different electrode materials for the determination of antibiotic Ciprofloxacin (CIPRO) are reported. This review provides an insight into direct and indirect electrochemical approaches as well as the photoelectrochemical methods used for the determination of CIPRO. Emphasis is put on the applications of unmodified and modified carbon-based electrodes considering the modifier, supporting electrolytes, analytical method, concentration range, limit of detection, and real matrices. Carbon-based electrodes are the most used materials attributed to their commercial availability, reduced cost, high chemical stability, and non-toxicity.

Development of an in-syringe gas-assisted density tunable solidification of floating organic droplet-based dispersive liquid phase microextraction method coupled with HPLC-MS/MS for monitoring amikacin in biological fluids

A new sample preparation method named in-syringe gas-assisted density tunable dispersive liquid phase microextraction based on solidification of floating organic droplet has been introduced. This method was coupled with high-performance liquid chromatography-tandem mass spectrometry and used for the extraction and quantification of amikacin in plasma and exhaled breath condensate (EBC) samples of the patients receiving amikacin. In the proposed approach, an inert gas is bubbled into a syringe barrel containing aqueous solution of the analyte and a mixture of low density extraction solvent and volatile density modifier. Consequently, the density modifier is evaporated and the analyte is migrated into the released extractant droplets. Basic parameters affecting efficiency of the developed method were optimized. Under optimum conditions, the method limits of detection were 0.06 and 0.29 ng/mL in EBC and plasma, respectively. The extraction recoveries were 90% and 87% in EBC and plasma, respectively. Also, the obtained relative standard deviations were below 9.5% and 9.8% for EBC and plasma, respectively. Considering these results, the developed method provides a quick and efficient way to determine amikacin in patients' biological fluids and can be used widely in drug monitoring and clinical studies.

Metal-Organic Framework-Based Composites for the Detection and Monitoring of Pharmaceutical Compounds in Biological and Environmental Matrices

The production of synthetic drugs is considered a huge milestone in the healthcare sector, transforming the overall health, aging, and lifestyle of the general population. Due to the surge in production and consumption, pharmaceutical drugs have emerged as potential environmental pollutants that are toxic with low biodegradability. Traditional chromatographic techniques in practice are time-consuming and expensive, despite good precision. Alternatively, electroanalytical techniques are recently identified to be selective, rapid, sensitive, and easier for drug detection. Metal-organic frameworks (MOFs) are known for their intrinsic porous nature, high surface area, and diversity in structural design that provides credible drug-sensing capacities. Long-term reusability and maintaining chemo-structural integrity are major challenges that are countered by ligand-metal combinations, optimization of synthetic conditions, functionalization, and direct MOFs growth over the electrode surface. Moreover, chemical instability and lower conductivities limited the mass commercialization of MOF-based materials in the fields of biosensing, imaging, drug release, therapeutics, and clinical diagnostics. This review is dedicated to analyzing the various combinations of MOFs used for electrochemical detection of pharmaceutical drugs, comprising antibiotics, analgesics, anticancer, antituberculosis, and veterinary drugs. Furthermore, the relationship between the composition, morphology and structural properties of MOFs with their detection capabilities for each drug species is elucidated.

One-pot synthesis of β-cyclodextrin modified silver nanoparticles for highly sensitive detection of ciprofloxacin

This study emphases on electrochemical detection of ciprofloxacin in sheep serum and runoff water using silver nanoparticle modified β-cyclodextrin (Ag-β-CD) composite. The Ag-β-CD composite was synthesized via a hydrothermal route, which resulted in a high product yield. Morphological and spectral characterizations of the Ag-β-CD composite were carried out. The Ag-β-CD composite was used to detect ciprofloxacin by employing differential pulse voltammetry (DPV) and cyclic voltammetry (CV). The Ag-β-CD modified electrode displayed excellent specificity towards the electro-oxidation of ciprofloxacin. Further, the sensor gave the best response towards the electro-oxidation of ciprofloxacin near the human physiological pH of 7.5. A linear response was obtained between the concentration range of 0.1 nM to 50 nM and the limit of detection (LOD) at 0.028 nM with high sensitivity and selectivity towards ciprofloxacin oxidation. The current work has a rationally synthesized and characterized nanocomposite with a very high potential for rapid and sensitive detection of ciprofloxacin in spiked sheep blood serum and domestic runoff water samples. High sensitivity and low LOD results illustrate good practicability for the detection of ciprofloxacin in such samples in the near future.