Electrochemical Sensing Platform Based on Lotus Stem‐derived Porous Carbon for the Simultaneous Determination of Hydroquinone, Catechol and Nitrite

Electrochemical sensor based on PEDOT/CNTs-graphene oxide for simultaneous determination of hazardous hydroquinone, catechol, and nitrite in real water samples

Hydroquinone (HQ), catechol (CC) and nitrite (NT) are considered aquatic environmental pollutants. They are highly toxic, harm humans' health, and damage the environment. Thus, in the present work we introduce a simple and efficient electrochemical sensor for determination of HQ, CC, and NT simultaneously in wastewater sample. The sensor is fabricated by modifying the surface of a glassy carbon electrode (GCE) by two successive thin films from poly(3,4-ethylenedioxythiophene) (PEDOT) and a mixture of carbon nanotubes-graphene oxide (CNT-GRO). Under optimized conditions the HQ, CC, and NT are successfully detected simultaneously in wastewater sample with changing their concentrations in the ranges (0.04 → 100 µM), (0.01 → 100 µM) and (0.05 → 120 µM), the detection limits are 8.5 nM, 3.8 nM and 6.1 nM, respectively. Good potential peak separations: 117 mV and 585 mV are obtained between the HQ-CC, and CC-NT. The sensor has an excellent catalytic capability toward the oxidation of HQ, CC, and NT due to good synergism between its composite components: PEDOT, GRO and CNTs. The features of the sensor are large active surface area, good electrical conductivity, perfect storage stability, good reproducibility, anti-interference capability and accepted recovery rate for HQ, CC, and NT determination in wastewater sample.

Enhancing electrochemical nitrite sensing with a novel nanocomposite of activated carbon/carbon cloth derived from microbial biofilm

A novel approach was employed to fabricate a biofilm-derived activated carbon (BioAc) electrode on a carbon cloth (Cc) substrate for electrochemical nitrite sensing in water samples. The biofilm/Cc electrode was developed using a bioelectrochemical reactor, featuring a three-electrode system with nutrient media and microbial sources. The resultant biofilm electrode was activated at 450 °C for 2 h to eliminate impurities and enhance porosity. Morphological analysis of the BioAc/Cc electrode revealed a surface characterized by a compact film composed of numerous carbon nanoparticles. X-ray diffraction (XRD) analysis exhibited broad, highly crystalline peaks, enhancing both the electrode surface area and conductivity. Amperometry tests on the modified BioAc/Cc electrodes demonstrated a detection limit of 0.015 μM, a sensitivity of 1946.54 μA mM-1 cm-2, and a linear range spanning 0.35-478.21 μM at neutral pH conditions. Moreover, the electrodes demonstrated good stability with a RSD of 2.25% after 60 days and high reproducibility with an RSD of 1.64%. Real-time results showed 99.2 and 100.1% recovery for tap water and drinking water, respectively, highlighting the potential for commercialization in the future. These findings suggest that the BioAc/Cc electrode holds substantial potential for precise nitrite detection in environmental and wastewater applications.

Biomass-Derived Carbon-Based Electrodes for Electrochemical Sensing: A Review

The diverse composition of biomass waste, with its varied chemical compounds of origin, holds substantial potential in developing low-cost carbon-based materials for electrochemical sensing applications across a wide range of compounds, including pharmaceuticals, dyes, and heavy metals. This review highlights the latest developments and explores the potential of these sustainable electrodes in electrochemical sensing. Using biomass sources, these electrodes offer a renewable and cost-effective route to fabricate carbon-based sensors. The carbonization process yields highly porous materials with large surface areas, providing a wide variety of functional groups and abundant active sites for analyte adsorption, thereby enhancing sensor sensitivity. The review classifies, summarizes, and analyses different treatments and synthesis of biomass-derived carbon materials from different sources, such as herbaceous, wood, animal and human wastes, and aquatic and industrial waste, used for the construction of electrochemical sensors over the last five years. Moreover, this review highlights various aspects including the source, synthesis parameters, strategies for improving their sensing activity, morphology, structure, and functional group contributions. Overall, this comprehensive review sheds light on the immense potential of biomass-derived carbon-based electrodes, encouraging further research to optimize their properties and advance their integration into practical electrochemical sensing devices.

Recent progress in the development of porous carbon-based electrodes for sensing applications

Electrochemical (bio)sensors are considered clean and powerful analytical tools capable of converting an electrochemical reaction between analytes and electrodes into a quantitative signal. They are an important part of our daily lives integrated in various fields such as healthcare, food and environmental monitoring. Several strategies including the incorporation of porous carbon materials in its configuration have been applied to improve their sensitivity and selectivity in the last decade. The porosity, surface area, graphitic structure as well as chemical composition of materials greatly influence the electrochemical performance of the sensors. In this review, activated carbons, ordered mesoporous carbons, graphene-based materials, and MOF-derived carbons, which are used to date as crucial elements of electrochemical devices, are described, starting from their textural and chemical compositions to their role in the outcome of electrochemical sensors. Several relevant and meaningful examples about material synthesis, sensor fabrication and applications are illustrated and described. The closer perspectives of these fascinating materials forecast a promising future for the electrochemical sensing field.