Scale-up of free-flow electrophoresis: II. Purification of alcohol dehydrogenase from a crude yeast extract by field step electrophoresis and combined field step-zone electrophoresis

Improving sensitivity in micro-free flow electrophoresis using signal averaging

Microfluidic free-flow electrophoresis (microFFE) is a separation technique that separates continuous streams of analytes as they travel through an electric field in a planar flow channel. The continuous nature of the microFFE separation suggests that approaches more commonly applied in spectroscopy and imaging may be effective in improving sensitivity. The current paper describes the S/N improvements that can be achieved by simply averaging multiple images of a microFFE separation; 20-24-fold improvements in S/N were observed by averaging the signal from 500 images recorded for over 2 min. Up to an 80-fold improvement in S/N was observed by averaging 6500 images. Detection limits as low as 14 pM were achieved for fluorescein, which is impressive considering the non-ideal optical set-up used in these experiments. The limitation to this signal averaging approach was the stability of the microFFE separation. At separation times longer than 20 min bubbles began to form at the electrodes, which disrupted the flow profile through the device, giving rise to erratic peak positions.

Fast electrophoretic separation optimization using gradient micro free-flow electrophoresis

The continuous nature of micro free-flow electrophoresis (mu-FFE) was used to monitor the effect of a gradient of buffer conditions on the separation. This unique application has great potential for fast optimization of separation conditions and estimation of equilibrium constants. COMSOL was used to model pressure profiles in the development of a new mu-FFE design that allowed even application of a buffer gradient across the separation channel. The new design was fabricated in an all glass device using our previously published multiple-depth etch method (Fonslow, B. R.; Barocas, V. H.; Bowser, M. T. Anal. Chem. 2006, 78, 5369-5374, ref 1). Fluorescein solutions were used to characterize the applied gradients in the separation channel. Linear gradients were observed when buffer conditions were varied over a period of 5-10 min. The effect of a gradient of 0-50 mM hydroxypropyl-beta-cyclodextrin (HP-beta-CD) on the separation of a group of 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) labeled primary amines was monitored as a proof of concept experiment. Direct comparisons to capillary electrophoresis (CE) separations performed under the same conditions were made. Gradient mu-FFE recorded 60 separations during a 5 min gradient allowing nearly complete coverage across a range of HP-beta-CD concentrations. In comparison, 4 h were required to assess 15 sets of conditions across the same range of HP-beta-CD concentrations using CE. Qualitatively, mu-FFE separations were predictive of the migration order and spacing of peaks in CE electropherograms measured under the same conditions. Data were fit to equations describing 1:1 analyte-additive binding to allow a more quantitative comparison between gradient mu-FFE and CE.

Separation of plant membranes by electromigration techniques

The review focuses on the multiple separating regimes that offers the free flow electrophoresis technique: free flow zone electrophoresis, isoelectric focusing, isotachophoresis, free flow step electrophoresis. Also, the feasibility to apply either interval or continuous flow electrophoresis is evaluated. The free flow zone electrophoresis regime is generally selected for the separation of cells, organelles and membranes while the other regimes find their largest fields of applications in the purification of proteins and peptides. The latter regimes present the highest resolution efficiency. Therefore, a large part of this review is devoted to the applicabilities of these different regimes to the purification of organelles and membrane vesicles at the preparative scale. Recent developments, both in instrumentation and procedures, are described. The major achievements in plant membrane fractionation obtained with free flow electrophoresis are outlined. The related procedures are both analytical and preparative: they separate tonoplast and plasma membrane simultaneously from the same homogenate, they discriminate for one type of membrane vesicles of opposite orientation, and process large quantities of membrane material by reason of the continuous flow mode. Recent advances using electromigration techniques that permit confirmation of the dynamic state of membranes, characterisation of complex membrane-dependent functions and discovery of new membrane-localised activities are presented.

Application of free-flow electrophoresis to the purification of trichosanthin from a crude product of acetone fractional precipitation

The application of free-flow electrophoresis (FFE) to the purification of trichosanthin (TCS) from a crude product of acetone fractional precipitation was investigated. An electrophoresis technique, combining field step electrophoresis (FSE) and zone electrophoresis (ZE) to a one-step procedure, was optimized until a satisfactory purification factor (1.35), high resolution, and purity (>99%) were achieved. Testing several separation buffer systems revealed that a throughput of 14.2 mg/h can be obtained when the very basic TCS (pI 10.1) was dissolved and electrophoresed in a phosphate buffer system of pH 4. The purity of electrophoresed trichosanthin was proved by a variety of analytical methods, such as sodium dodecyl sulfate (SDS)-gel electrophoresis, capillary isoelectric focusing (CIEF), and sequencing of N- and C-termini. The high purity and large throughput achieved at low cost by using FFE indicates that this method can be employed for TCS purification.

Continuous free-flow electrophoresis

This review evaluates the literature on continuous free flow electrophoresis, published during the last four years. Its aim is to serve not only experts in the field but also newcomers, and, therefore, it also briefly describes the principles of the method and the techniques used, referring to fundamental papers published earlier. The actual commercial instrumentation is briefly outlined. A substantial part of this review is devoted to the optimization of the performance of this method. Finally, diverse applications of fractionations of charged species in solution, ranging from small ions to biological particles and cells, are surveyed.

Unstable proteins: how to subject them to chromatographic separations for purification procedures

The chromatographic separation of an unstable protein is often a challenge to the scientist working in the field of life sciences. Especially for the purification of sensitive enzymes, making use of conventional chromatographic techniques is difficult and frequently results in a complete loss of biological activity of the target protein. This report summarizes some general strategies that may help to keep unstable proteins in their native conformation during the rather harsh conditions of a purification procedure. In this context, a recently developed hollow fiber membrane module, suitable for performing on-line dialysis, is introduced and examples of its application to liquid column chromatography are given. Many innovative separation techniques, characterized by dramatic improvements in both performance and separation time, have recently been developed. Since the chromatographic separation of unstable proteins requires the use of modern state-of-the-art equipment and technology, emphasis is given to newly developed separation techniques such as expanded bed adsorption, perfusion chromatography, protein free flow electrophoresis and the use of tentacle gels. In addition, examples of recently published purifications of unstable proteins are discussed with respect to strategies ensuring the preservation of the native protein structure during chromatographic separation.