Automated Ferguson analysis of glycoproteins by capillary electrophoresis using a replaceable sieving matrix

Discrimination of Glycoproteins from Unglycosylated Proteins in Capillary Electrophoresis: Two-Color LIF Detection Coupled with Post-column Derivatization

Glycosylation is one of the most important posttranslational modifications (PTMs) which lead to the functionalization of proteins. Here, we describe one method for discriminating glycosylated proteins from unglycosylated ones in their mixture sample by capillary electrophoretic separation and two-color laser-induced fluorescence detection coupled with post-column derivatization. Two lasers emitting at 450 and 532 nm permit the detection of amino groups of proteins derivatized by naphthalene-2,3-dicarboxaldehyde and a fluorescently labeled lectin, tetramethylrhodamine-labeled concanavalin A (Rh-Con A), respectively. When a protein mixture react with Rh-Con A, the glycoproteins bound with Rh-Con A exhibit signals at the same migration time in two electropherograms obtained by 450- and 532-nm lasers whereas unbound proteins show a signal only in the electropherogram of the 450-nm laser. So, when one protein is glycosylated it is detected at the same migration time in the electropherograms obtained by two lasers.

Effect of N-glycosylation on the transport activity of the peptide transporter PEPT1

The intestinal peptide transporter PEPT1 provides bulk quantities of amino acids to epithelial cells. PEPT1 is a high-capacity and low-affinity solute carrier of the SLC15 family found in apical membranes of enterocytes in small intestine and distal colon. Surprisingly, murine PEPT1 (mPEPT1) has an apparent molecular mass of ∼95 kDa in the small intestine but ∼105 kDa in the large intestine. Here we describe studies on mPEPT1 protein glycosylation and how glycans affect transport function. Putative N-glycosylation sites of mPEPT1 were altered by site-directed mutagenesis followed by expression in Xenopus laevis oocytes. Replacement of six asparagine residues (N) at positions N50, N406, N439, N510, N515, and N532 by glutamine (Q) resulted in a decrease of the mPEPT1 mass by around 35 kDa. Electrophysiology revealed all glycosylation-deficient transporters to be functional with comparable expression levels in oocyte membranes. Strikingly, the mutant protein with N50Q exhibited a twofold decreased affinity for Gly-Sar but a 2.5-fold rise in the maximal inward currents compared with the wild-type protein. Elevated maximal transport currents were also recorded for cefadroxil and tri-l-alanine. Tracer flux studies performed with [(14)C]-Gly-Sar confirmed the reduction in substrate affinity and showed twofold increased maximal transport rates for the N50Q transporter. Elimination of individual N-glycosylation sites did not alter membrane expression in oocytes or overall transport characteristics except for the mutant protein N50Q. Because transporter surface density was not altered in N50Q, removal of the glycan at this location appears to accelerate the substrate turnover rate.

Occurrence and Genetic Diversity of Winona-Like Plum pox virus Isolates in Russia

In studying the distribution and genetic diversity of Plum pox virus (PPV) in Russia, over a dozen new PPV isolates belonging to the strain Winona (PPV-W) were identified by immunocapture reverse-transcription polymerase chain reaction with the PPV-W-specific primers 3174-SP-F3/3174-SP-R1. Isolates were detected in two geographically distant regions of European Russia (Northern Caucasus and Moscow regions) in naturally infected plum (Prunus domestica), blackthorn (P. spinosa), Canadian plum (P. nigra), and downy cherry (P. tomentosa). The new PPV-W isolates were shown to be serologically related but not identical by triple-antibody sandwich enzyme-linked immunosorbent assay and Western blotting analysis using the monoclonal antibody (MAb) 5B-IVIA and MAbs specific to the N-terminal epitopes of PPV-W isolate 3174. Analysis of nucleotide and deduced amino acid sequences of the (C-ter)NIb-(N-ter)CP genome region indicate great genetic diversity among isolates, with phylogenetic analysis revealing seven clades. Isolates P1 and P3 found in plum in the south of Russia clustered closely with the putative ancestral PPV-W isolate LV-145bt from Latvia, while isolate 1410-7 found in P. nigra in Moscow appears to be closely related to the Canadian isolate W3174. The data obtained indicate wide dissemination of PPV-W isolate in stone fruit in the European part of the former USSR.

Size separation of proteins by capillary zone electrophoresis with cationic hitchhiking

The paper describes a method of size separation of proteins by capillary sieving electrophoresis with cationic surfactant. Proteins are separated within 12 min with repeatability of migration times better than 0.2%. Some proteins achieve the separation efficiency of 200,000 theoretical plates. The method can be used for determination of protein relative molecular masses. The accuracy of the determined relative molecular masses and the limitation of the method were investigated by the analysis of more than 60 proteins. The method also allows separation of protein oligomers. Proteins can be quantitated after the electrokinetic injection in the concentration range 0.07-0.43 g/L. The average detection limit is about 2 mg/L.

Chemical modification of proteins to improve the accuracy of their relative molecular mass determination by electrophoresis

We studied the electrophoretic behavior of basic proteins (cytochrome c and histone III) and developed a carbamylation method that normalizes their electrophoretic size separation and improves the accuracy of their relative molecular mass determined electrophoretically. In capillary zone electrophoresis with cationic hitchhiking, native cytochrome c does not sufficiently bind cationic surfactants due to electrostatic repulsion between the basic protein and cationic surfactant. Carbamylation suppresses the strong positive charge of the basic proteins and results in more accurate relative molecular masses.

Poly(N,N-dimethylacrylamide)-grafted polyacrylamide: a self-coating copolymer for sieving separation of native proteins by CE

The potential of a series of newly synthesized poly(N,N-dimethylacrylamide) (PDMA) grafted polyacrylamide (PAM) copolymers (P(AM-PDMA)) as a replaceable separation medium for protein analysis was studied. A comparative study with and without copolymers was performed; the separation efficiency, analysis reproducibility and protein recovery proved that the P(AM-PDMA) copolymers were efficient in suppressing the adsorption of basic proteins onto the silica capillary wall. Furthermore, the size-dependent retardation of native proteins in a representative P(AM-PDMA) copolymer was demonstrated by Ferguson analysis. The results showed that the P(AM-PDMA) copolymers combine the good coating property of PDMA and the sieving property of PAM and could be applied as a sieving matrix for the analysis of native proteins.

Capillary electrophoresis and the clinical laboratory

Over the past 15 years, CE as an analytical tool has shown great promise in replacing many conventional clinical laboratory methods, such as electrophoresis and HPLC. CE's appeal was that it was fast, used very small amounts of sample and reagents, was extremely versatile, and was able to separate large and small analytes, whether neutral or charged. Because of this versatility, numerous methods have been developed for analytes that are of clinical interest. Other than molecular diagnostic and forensic laboratories CE has not been able to make a major impact in the United States. In contrast, in Europe and Japan an increasing number of clinical laboratories are using CE. Now that automated multicapillary instruments are commercially available along with cost-effective test kits, CE may yet be accepted as an instrument that will be routinely used in the clinical laboratories. This review will focus on areas where CE has the potential to have the greatest impact on the clinical laboratory. These include analyses of proteins found in serum and urine, hemoglobin (A1c and variants), carbohydrate-deficient transferrin, forensic and therapeutic drug screening, and molecular diagnostics.

Rapid determination of protein molecular weight by the Ferguson method and multiplexed capillary electrophoresis

A method based on the use of the Ferguson method and multiplexed sodium dodecyl sulfate-capillary gel electrophoresis (SDS-CGE) with UV detection was demonstrated for the rapid determination of molecular weights of proteins. The method employs a capillary array where different uncoated capillaries are filled with gel buffers containing different concentrations of poly(ethylene oxide) (PEO). All data required to construct Ferguson plots and universal calibration curves for the determination of the molecular weights of diverse types of proteins are generated simultaneously in an eight-capillary array within 20 min.

Capillary electrophoresis sodium dodecyl sulfate nongel sieving analysis of a therapeutic recombinant monoclonal antibody: a biotechnology perspective

With the increasing interest in the therapeutic use of recombinant monoclonal antibodies (rMAbs), a generic analytical approach for the analysis of size-based rMAb variants is desired. Such a method using capillary electrophoresis (CE) with laser-induced fluorescence detection is described. The assay was developed as a replacement for silver-stained SDS-PAGE and was validated according to the guidelines of the International Committee on Harmonization for use in routine lot release testing of a rMAb pharmaceutical. In this assay, the rMAb solution is first derivatized with a neutral fluorophore, e.g., 5-carboxytetramethylrhodamine succinimidyl ester. The labeled sample is then incubated with SDS, and the SDS-protein complexes are then separated by CE using a hydrophilic polymer as a sieving matrix. The precolumn labeling conditions described in this study allowed the detection of rMAb at a low-nanomolar concentration (9 ng/mL), with no apparent loss in resolution or changes to the distribution of rMAb analyte species, when compared to an unlabeled sample. In addition, the traditional practice of heating proteins at elevated temperatures in the presence of SDS to facilitate SDS-protein binding resulted in the generation of significant levels of rMAb fragmentation, and alternative conditions to minimize this artifact are discussed. Illustrations of the uses of this assay in monitoring consistency of bulk manufacture of a protein pharmaceutical, and in providing a size-based separation of product-related variants, as well as nonproduct impurities are shown. In brief, the assay described in this paper demonstrated comparable resolution and sensitivity to silver-stained SDS-PAGE but offered the advantages of enhanced precision and robustness, speed, ease of use, and on-line detection.

Electrophoretic methods for process monitoring and the quality assessment of recombinant glycoproteins

In many ways electrophoretic techniques appear ideal for quality monitoring of proteins and are thus well suited for the analysis of recombinant glycoproteins. The requirements of high throughput, comparative analysis and resolution of many variants are met by several electrophoretic techniques. A wide variety of such techniques are available to biotechnologists in the rapidly developing area of recombinant glycoproteins. It is the aim of this review to specifically cover recent work which has been applied to the analysis of DNA-derived glycoproteins, both from a process control standpoint and final product validation. All major areas of electrophoresis including sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), isoelectric focusing and techniques utilizing capillary electrophoresis are covered, with emphasis on analysis of glycoforms and oligosaccharide profiles of recombinant glycoproteins. As illustration, actual examples rather than standard glycoproteins are given to indicate the potential and limitations which may be encountered. It is anticipated that this review will prove a useful and practical guide to the latest developments by indicating the relevant merits of different methods.

Rapid SDS-Gel capillary electrophoresis for the analysis of recombinant NADP(+)-dependent formate dehydrogenase during expression in Escherichia coli cells and its purification

The level of expression in Escherichia coli cells and different steps of purification of the recombinant NADP(+)-dependent formate dehydrogenase (EC 1.2.1.2, FDH) from bacterium Pseudomonas sp.101 was analyzed by rapid SDS-Gel capillary electrophoresis (SDS-Gel CE) and compared with SDS polyacrylamide gel electrophoresis (SDS PAGE). First standard proteins were separated in the short capillary and the calibration curve generated, then fractions taken during the fermentation and purification process were analysed. The main advantages of SDS-Gel CE are short analysis time, high sensitivity, the possibility to quantify proteins at different ultraviolet wavelength, and small injection volumes. The data for each step of the fermentation process and during the purification were controlled by spectrophotometric analysis of enzyme activity and protein concentration as well as standard SDS PAGE. The molecular mass of the purified FDH was determined as 44,078 Da by matrix-assisted laser desorption/ ionisation time of flight mass spectrometry.

HPCE methods for the identification and quantitation of antibodies, their conjugates and complexes

We review here much of the existing literature that deals with analysis, resolution, characterization, and (at times) quantitation of antibodies in capillary electrophoresis modes. Each major mode of CE shown applicable to antibody analysis is described, along with the major applications of that mode for antibodies. Discussions are presented as to the mechanisms of antibody resolution in CE, interactions of various buffer components with the proteins leading to resolution, and methods of quantitation for antibodies. The literature is critically reviewed with regard to true application of CE for antibody analysis, limitations, information possible, information implied, and which samples have actually been assayed by CE modes. The literature is critically reviewed up to and including 1996, both for the scientific and commercial literature, especially vendor applications and real world applications possible.

Capillary zone electrophoresis of proteins

This review article with 237 references is focused on capillary zone electrophoresis (CZE) of proteins. It includes discussion of modeling electrophoretic migration of proteins, sample pretreatment before the analysis, methods reducing the sorptions of proteins on the capillary wall, and techniques for increasing selectivity by using electrolyte additives including the sieving matrices. Significant progress in detection techniques, namely in laser-induced fluorescence and mass spectrometry, is emphasized. Modifications of CZE using specific interactions, such as affinity capillary electrophoresis or capillary immunoelectrophoresis, are debated as well as combination of CZE with other separation methods such as high performance liquid chromatography (HPLC). A number of practical applications of CZE of proteins are described.

Sodium dodecyl sulfate-polymer capillary electrophoresis for the analysis of cell culture proteins

The application of sodium dodecyl sulfate (SDS)-polymer capillary electrophoresis (CE) to the analysis of proteins of hybridoma cell culture supernatant is demonstrated. All steps of the developed analysis are shown and discussed. Following optimization of sample preparation and concentration, as well as of the mode of injection all main protein components were separated with high resolution and selectivity. Proteolytic degradation of IgG, due to microbial contamination, was observed on SDS-gel CE and capillary zone electrophoresis (CZE). The technique was applied to monitor the cell cultivation process and concentrations of main components are demonstrated. IgG was found to increase from initially 5 mg/L to 20 mg/L after 4 days and to > 130 mg/L after 14 days of cultivation. The techniques may be applied to other biotechnological processes for the production or purification of proteins.

Capillary isoelectric focusing and sodium dodecyl sulfate-capillary gel electrophoresis of recombinant humanized monoclonal antibody HER2

Capillary isoelectric focusing (cIEF) and IEF of recombinant humanized monoclonal antibody HER2 (rhuMAbHER2) show five charged isoforms with estimated pI values ranging from 8.6-9.1. The cIEF assay demonstrated good precision with relative standard deviations (R.S.D.) 0.7-3.7% and 0.4-4.2% for intra and interassay analysis, respectively. The method was linear for the area of the main peak over the concentration range 2-250 micrograms/ml with a Pearson correlation coefficient > 0.99. The limit of detection for the main peak was determined to be 2 ppm. With both sodium dodecyl sulfate-capillary gel electrophoresis (SDS-CGE) and SDS-polyacrylamide gel electrophoresis, the nonreduced rhuMAbHER2 migrated as a single major peak with minor peaks in the aggregate and clip regions. After reduction, the electropherogram and the slab gel showed the expected heavy chain and light chain fragments with minor peaks in the aggregate and clip regions. The SDS-CGE assay showed good precision with R.S.D. values of 0.1-7.8% and 0.1-8.1% for intra and interassay analysis, respectively. The Pearson correlation coefficient for the area of the main peak was > 0.99 demonstrating linearity for the concentration range 0.5-500 micrograms/ml. The limit of detection for intact rhuMAbHER2 was determined to be 0.5 ppm. The data presented demonstrates the feasibility of replacing the slab gel techniques with capillary electrophoresis in a quality control environment.