Peptides as standards for denaturing isoelectric focusing

Fish muscle parvalbumins as marker proteins for native and urea isoelectric focusing

An isoelectric point (pI) calibration kit containing fish muscle parvalbumins was prepared and tested for its suitability for isoelectric focusing (IEF) in the presence of 8 M urea. The pattern obtained by urea CleanGel IEF consisted of nine bands covering the pI range 4.96-5.64. This range is relevant for species identification of heated fish by urea IEF. The kit may also be used for native IEF in the low pH range, as demonstrated by running an extract made from the kit together with water-soluble fish muscle proteins on Servalyt Precotes 3-6.

Electrophoretic methods for process monitoring and the quality assessment of recombinant glycoproteins

In many ways electrophoretic techniques appear ideal for quality monitoring of proteins and are thus well suited for the analysis of recombinant glycoproteins. The requirements of high throughput, comparative analysis and resolution of many variants are met by several electrophoretic techniques. A wide variety of such techniques are available to biotechnologists in the rapidly developing area of recombinant glycoproteins. It is the aim of this review to specifically cover recent work which has been applied to the analysis of DNA-derived glycoproteins, both from a process control standpoint and final product validation. All major areas of electrophoresis including sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), isoelectric focusing and techniques utilizing capillary electrophoresis are covered, with emphasis on analysis of glycoforms and oligosaccharide profiles of recombinant glycoproteins. As illustration, actual examples rather than standard glycoproteins are given to indicate the potential and limitations which may be encountered. It is anticipated that this review will prove a useful and practical guide to the latest developments by indicating the relevant merits of different methods.

Isoelectric focusing in immobilized pH gradients: an update

The latest trends on isoelectric focusing (IEF) in immobilized pH gradients (IPG) are here reviewed. The major advances on IPG technologies have been made when interfacing this technique with sodium dodecyl sulfate-polyacrylamide gel electrophoresis to produce two-dimensional (2-D) maps. Previous 2-D maps were routinely performed using conventional IEF as a first dimension, which typically resulted in poor reproducibility of spot position. With IPGs, correlation between experimental and calculated protein pI values is as good as +0.01 to 0.02 pH units. A new software has also been released, permitting easy calculation and optimization of linear, concave and convex exponential gradients, even in very complex recipes utilizing all ten Immobiline chemicals. It has also been proven that IPGs can be interfaced with mass spectrometry, thus obtaining a novel 2-D map with the best of pI measurements in the first dimension coupled with the best of mass determination in the second dimension. Recently, it has been shown that IPGs can be exploited to charter forbidden grounds, with the creation of non-linear pH gradients covering the extreme alkaline pH 10-12 gradient. In such basic regions, excellent steady-state patterns of histones and subtilisin mutants have been reported. Different families of histones could be mapped not only in this pH 10-12 interval, but also in 2-D maps exploiting this very alkaline gradient in the first dimension. Although the IPG technique is now a trouble-free, user-friendly technique, some annoying artefacts, producing severe protein smears and precipitation, were very recently reported, but found to be linked to some commercial Immobiline preparations containing up to 5% oligomers. Better quality control on the part of the company producing such chemicals should eliminate even this last source of troubles.

Isoelectric focusing in immobilized pH gradients: recent analytical and preparative developments

Isoelectric focusing in immobilized pH gradients (IPG), covering both analytical and preparative aspects, is here reviewed. An extensive introduction covers the development of the technique from its inception in 1982 to present day methodology, with particular emphasis on the development of computer programs able to calculate and optimize linear and nonlinear pH gradients, spanning as much as 9 pH units, from a mixture of as many as 10 different buffering ions and titrants. The unique resolving power of IPGs is illustrated with the resolution of fetal globin chains differing by an Ala/Gly substitution in residue 75, this bringing about a minute difference in pI value of only 0.001 pH units. IPG runs, performed under denaturing conditions, allow an excellent correlation between experimental and theoretical protein pIs, to the extent that outliers were found to be polypeptide chains which had undergone post-synthetic modifications. The IPG methodology allows easy interfacing with mass spectrometry, due to the fact that proteins eluted from an IPG gel are isoionic as well as isoelectric, and thus are not contaminated by any buffer ion. The review ends with an excursus on preparative aspects of IPGs: a novel apparatus, based on the principle of isoelectric, buffering membranes, allows pilot-scale purification of r-DNA proteins to extreme purity, with recovery in a liquid vein. Isoelectric membranes have a selectivity based on a continuous titration process, and thus act as isoelectric traps for individual protein species. This same preparative apparatus can be used as a novel immobilized enzyme reactor, with superior performance compared to conventional types of reactors.

Examination of capillary zone electrophoresis, capillary isoelectric focusing and sodium dodecyl sulfate capillary electrophoresis for the analysis of recombinant tissue plasminogen activator

The microscale techniques of CZE, cIEF and SDS capillary electrophoresis have been evaluated for the analysis of a complex glycoprotein, recombinant tissue plasminogen activator (rtPA). A series of omega-amino acid buffers (pH approximately 5) was found suitable for the CZE separation of rtPA on coated capillaries. rtPA could be resolved into a series of major and minor peaks in an epsilon-aminocaproic acid buffer containing 0.01% (v/v) Tween 80. For cIEF, a two step method with pressure mobilization was utilized. Using a commercial instrument, either a polymer solution with a 50 microns I.D. capillary or narrow bore capillaries without a polymer solution (25 microns I.D.) were employed. rtPA was resolved into at least eight species within a pI range of 6.4-9.2 using Ampholine 3.5-10. Migration time precision for the major peaks ranged from 0.2% for CZE to < or = 2-3% R.S.D. for cIEF. Total recovery of rtPA from the capillary was also demonstrated for both methods. Analysis of rtPA, rtPA Type I, rtPA Type II and the desialylated forms resulted in the expected elution profiles. Finally, the potential of SDS capillary electrophoresis using a coated capillary for an rtPA Type I/Type II purity assay was shown.

Calculation of the isoelectric points of native proteins with spreading of pKa values

The isoelectric points (pI) of native proteins are important in several separation techniques. For estimating pI values the net charge of several proteins was calculated versus pH by use of the Henderson-Hasselbalch equation. Amino acid composition, pKa values for amino acid side chains and for the N- and C-terminal groups, and the presence of other charged groups were taken into account. A set of pKa values was chosen for amino acid residues with ionizable side chains. Each particular type of ionizable group was assumed to have pKa values distributed around the chosen value, thereby simulating the situation in proteins and polypeptides. The calculated pI values showed reasonably good agreement with experimental ones for most of 16 native proteins over a wide pH range (3.4-11) when charge contributions of heme groups, sialic acid residues, etc., were taken into account. The calculated pI for the human red cell glucose transporter (Glut1) with one sialic acid residue was decreased from 8.8 to 8.5 by introducing pKa value spreading and became consistent with the experimental pI value of 8.4 +/- 0.05 at 15 degrees C determined in the presence of 6 M urea. The pI of the native Glut1 was lower, 8.0 +/- 0.1, at 22 degrees C. In general, the pI values for native proteins are affected by the three-dimensional structure of the proteins, which causes greater differences between calculated and experimental pI values than in the case of polypeptides for which pI values are determined in the presence of urea.