Electroosmotic control of chiral separation in capillary zone electrophoresis

Control of EOF in CE by different ways of application of radial electric field

Various ways of application of radial electric field for the control of electrokinetic potential and EOF in a home-made device for CE are presented. The device comprises three high-voltage power supplies, which are used to form a radial electric field across the fused-silica capillary wall. One power supply provides the internal electric field - a driving force for electrophoretic migration of charged analytes and for the EOF. Two power supplies are connected to the ends of the outer low-conductivity polymeric coating, which is formed by the dispersion of insoluble conductive copolymer of aniline and p-phenylendiamine in polystyrene matrix (dissolved in N-methylpyrrolidone) attached to the original outer polyimide coating of the capillary. They are able to constitute the external longitudinal electric field with variable values of electric potential at both ends of the outer coating. The potential gradient between the external and internal electric field is perpendicular to the capillary wall and forms a radial electric field across the capillary wall, which affects the electrokinetic potential at the solid-liquid interface and EOF inside the capillary. The developed device and methodology has been applied for the analysis of both chiral and achiral molecules such as terbutaline enantiomers and oligopeptides (diglycine and triglycine). The effect of magnitude, orientation, and different ways of application of the radial electric field on the flow rate of the EOF and on the speed, efficiency, and resolution of CZE separations of the above analytes in the internally noncoated fused-silica capillaries have been evaluated.

Strategies for enantioseparations of catecholamines and structurally related compounds by capillary zone electrophoresis using sulfated β-cyclodextrins as chiral selectors

Strategies for simultaneous enantioseparations of three catecholamines (DL-norepinephrine, DL-epinephrine, and DL-isoproterenol) and three structurally related compounds (DL-octopamine, DL-synephrine, and DL-norephedrine) by CZE using sulfated beta-CDs as chiral selectors were investigated. Four different separation modes were attempted: (I) using randomly sulfate-substituted beta-CD (MI-S-beta-CD) at relatively low concentrations in a high-concentration phosphate buffer at low pH in the normal polarity mode, (II) using MI-S-beta-CD at high concentrations at low pH in the reversed polarity mode, (III) using MI-S-beta-CD at moderately high concentrations in a phosphate buffer at neutral pH in the normal polarity mode, and (IV) using the single isomer heptakis(2,3-dihydroxy-6-O-sulfo)-beta-CD (SI-S-beta-CD) at low to moderately high concentrations in a high-concentration BGE at low pH in the normal polarity mode. Among them, enantioseparation of these cationic solutes was best achieved under the conditions of mode (II). In mode (II) and mode (III), temperature is an important factor affecting the enantioresolution of norepinephrine. In mode (I) and mode (IV), the use of a high-concentration BGE (150-200 mM) is crucial for effective enantioseparation of these cationic solutes with sulfated beta-CDs. Comparative studies of enantioseparations of these cationic solutes with MI-S-beta-CD and SI-S-beta-CD reveal that the sulfate substituents of MI-S-beta-CD located at the C(2)- position interact strongly with the diol moiety of catecholamines.

Fast enantiomeric separation of basis drugs by electrokinetic chromatography. Application to the quantitation of terbutaline in a pharmaceutical preparation

Electrokinetic chromatography (EKC) using micelles of bile salts alone or mixed with sodium dodecyl sulfate (SDS) and neutral, anionic, or cationic cyclodextrins (CDs) in the separation buffer has been employed in order to achieve fast enantiomeric separation of basic drugs. A study of the enantiomeric separation ability of these chiral selectors concerning four basic drugs (epinephrine, terbutaline, clenbuterol, and salbutamol) has been carried out under different experimental conditions. The best chiral selectors to perform the enantiomeric separation of these drugs were neutral beta-CD derivatives, specifically permethylated beta-CD PM-beta-CD. The effect of the PM-beta-CD concentration, temperature, and applied voltage on the enantiomeric resolution of the basic drugs was investigated. The use of a 25 mM ammonium acetate buffer (pH 5.0), 30 mM in PM-beta-CD together with an applied voltage of 20 kV and a temperature of 15 degrees C enabled the individual and fast enantiomeric separation of epinephrine, norepinephrine, terbutaline, clenbuterol, and salbutamol each one into its two enantiomers in less than 3 min. The EKC method was validated (precision and accuracy) to quantitate terbutaline in a pharmaceutical preparation, obtaining a limit of detection of 4 microg/mL.

High-speed chiral separations on microchip electrophoresis devices

High-speed electrophoretic chiral separations have been successfully performed in a microfabricated device by employing cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC). Utilizing short separation channels and relatively high field strengths in combination with small volume-defined injection plugs, and operating in counter-electroosmotic flow conditions, fast and efficient separations of fluorescein insothiocyanate (FITC)-labeled amino acid enantiomers were obtained. Analysis time ranged from 75 s for the most basic amino acids to 160 s for the most acidic ones with associated efficiencies from 7000 up to 28 000 effective plates (100 000 to 395 000 plates/m). Buffer parameters were varied in order to study the effect on chiral resolution. A buffer system consisting of 100 mM borate (pH 9.4), 30 mM of SDS, and 10 mM gamma-CD as chiral selector provided adequate resolution of the majority of FITC-amino acid enantiomers tested.

Chiral separations in capillary electrophoresis

The marked increase in the number of communications on the utilization of electrophoresis for practical chiral separations within the last three years is the most evident, and the most important fact. It reveals that the basic period of intensive research in the field is finished. The search for chiral selectors discriminating racemates in a reasonably analytical manner and the study of both the mechanism and physicochemical aspects of the chiral discrimination process were the main features of that period. Here, we review the state of the art in the field and state the references of the related literature up to the end of 1998.

Controlling enantioselectivity in chiral capillary electrophoresis with inclusion-complexation

The separation of chiral compounds is of key importance in different fields of application, e.g., pharmaceutical, industrial, forensic, biological, clinical etc. Capillary electrophoresis (CE) is a powerful analytical method applied in chiral analysis and inclusion-complexation is one of the most frequently used mechanism to improve the selectivity of the enantiomeric separation. Cyclodextrins and their derivatives or modified crown-ethers have been successfully applied in CE for the enantiomeric separation of a wide number of analytes. This review surveys the separation of enantiomers by CE when chiral selectors, forming inclusion-complexation, are used. The control of enantioselectivity can be done carefully by considering several experimental parameters such as chiral selector type and concentration, pH, ionic strength and concentration of the background electrolyte, electroosmotic flow, organic modifier etc. The review presents a list of the latest separation of enantiomers by CE where inclusion-complexation plays a key role in the stereoselective separation mechanism.

Peak broadening in capillary zone electrophoresis

A review on peak broadening in capillary zone electrophoresis in free solutions is given which covers a selection of the literature published on this topic over the period mainly between 1992 and the beginning of 1997 (consisting of 71 publications). The contributions to peak dispersion from extracolumn effects (e.g. due to the finite length of the injection zone, or the aperture of the detector), from longitudinal diffusion, Joule heating, electromigration dispersion (concentration overload), a different path length of the solute ions, wall adsorption, laminar flow and the (longitudinally) homogeneous or nonhomogeneous electroosmotic flow are described. The latter may also occur when a longitudinally nonhomogeneous radial electric field is applied. Peak dispersion is depicted either by the plate-height model, or the concentration of the solute as a function of space and time is calculated either analytically or numerically by solving the equation of continuity with appropriate initial and boundary conditions and possibly completed by equations governing further quantities.