Peptide capillary zone electrophoresis mass spectrometry of recombinant human erythropoietin: an evaluation of the analytical method

Characterizing Endogenous Protein Complexes with Biological Mass Spectrometry

Biological mass spectrometry (MS) encompasses a range of methods for characterizing proteins and other biomolecules. MS is uniquely powerful for the structural analysis of endogenous protein complexes, which are often heterogeneous, poorly abundant, and refractive to characterization by other methods. Here, we focus on how biological MS can contribute to the study of endogenous protein complexes, which we define as complexes expressed in the physiological host and purified intact, as opposed to reconstituted complexes assembled from heterologously expressed components. Biological MS can yield information on complex stoichiometry, heterogeneity, topology, stability, activity, modes of regulation, and even structural dynamics. We begin with a review of methods for isolating endogenous complexes. We then describe the various biological MS approaches, focusing on the type of information that each method yields. We end with future directions and challenges for these MS-based methods.

Capillary electrophoresis time-of-flight mass spectrometry for a confident elucidation of a glycopeptide map of recombinant human erythropoietin

Capillary electrophoresis coupled to orthogonal accelerated time-of-flight mass spectrometry (CE/TOFMS) was used for the analysis of O- and N-glycopeptides of recombinant human erythropoietin (rhEPO). O(126) and N(83) with a tetraantennary complex type glycan (N(83)-4Ant) were selected as glycopeptide models to develop an optimum CE/TOFMS methodology capable of detecting and characterizing the wide variety of glycopeptides present in the glycoprotein digest. Glycopeptide adsorption in the inner surface of the fused-silica capillary was prevented after using a capillary conditioning of 1 M HAc between runs. On the other hand, different acidic conditions in the sheath liquid (SL) and in the background electrolyte (BGE) were tested with the aim of studying their influence in glycopeptide fragmentation. Finally, the fragmentor voltage value of the TOF-MS instrument was optimized to avoid the involuntary fragmentation of the native glycopeptides. Hence, the established method may be regarded as an excellent starting point to obtain reliable glycopeptide maps of complex glycoproteins such as rhEPO by CE/TOFMS.

Adsorbed cationic polymer coatings for enhanced capillary electrophoresis/mass spectrometry of proteins

The combination of capillary electrophoresis (CE) with mass spectrometry (MS) constitutes a powerful microanalytical system for the analysis of biological samples. The anionic and hydrophobic surface of the fused-silica capillary is, however, known to cause severe analyte-wall interactions in protein analysis. In order to control surface properties and eliminate protein adsorption, a capillary coating can be applied. A fast and simple strategy is to coat the anionic capillary with a cationic polymer via multisite electrostatic interaction. This generates a stable deactivation layer, without the need for addition of coating agent to the background electrolyte solution. This chapter reviews the present knowledge of capillary coatings and especially cationic polymers in CE-MS, and describes the synthesis of a cationic polymer, PolyE-323, for deactivation of fused-silica capillaries. The capillary coating procedure is a simple three-step rinsing protocol comprising deprotonation of surface silanol groups using a base, adsorption of polymer, and a final rinse to remove excess polymer not adsorbed to the surface. As a result of the simplicity of the coating procedure, highly reproducible coatings can be prepared with little or no expert skills. Some practical aspects on using cationic-coated capillaries in CE-MS protein analysis are also discussed.

Capillary electrophoresis–mass spectrometry as a characterization tool for therapeutic proteins

With the increasing use of capillary electrophoresis (CE) in the biotechnology industry, there is a demand for analytical tools and methodology that can be used to characterize CE profiles. This article describes the implementation and optimization of a robust online CE-mass spectrometry (CE-MS) system used for the characterization of several CE assays developed at Genentech Inc. These assays include CE as a complement to reverse-phase peptide mapping for the identification of small peptides eluting in the void volume, profiling N-linked glycopeptide heterogeneity, and determining O-linked site occupancy. In addition, CE-MS was used to confirm major 8-aminopyrene-1,3,6-trisulfonate (APTS)-labeled glycans released from recombinant antibodies that are routinely profiled by CE-laser-induced fluorescence (CE-LIF). For each study, CE-MS was able to successfully identify components seen in UV or LIF electropherograms, thereby expanding the capability of CE and CE-MS for profiling biomolecules.

Glycoform characterization of erythropoietin combining glycan and intact protein analysis by capillary electrophoresis – electrospray – time-of-flight mass spectrometry

Glycosylation of recombinant human erythropoietin (rHuEPO) is a post-translational process that alters biological activity, solubility and lifetime of the glycoprotein in blood, and strongly depends on the type of cell and the cell culture conditions. A fast and simple method providing extensive carbohydrate information about the glycans present in rHuEPO and other glycoproteins is needed in order to improve current methods in drug development or product quality control. Here, an improved method for intact rHuEPO glycoform characterization by CZE-ESI-TOF MS has been developed using a novel capillary coating and compared to a previous study. Both methods allow a fast separation in combination with accurate mass characterization of the single protein isoforms. The novel dynamic coating provides a separation at an EOF close to zero, enabling better separation. This results in an improved mass spectrometric resolution and the detection of minor isoforms. In order to assign an unequivocal carbohydrate composition to every intact glycoform, a CZE-ESI-MS separation method for enzymatically released underivatized N-glycans has been developed. The TOF MS allows the correct identification of the glycans due to its high mass accuracy and resolution. Therefore, glycan modifications such as acetylation, oxidation, sulfation and even the exchange of OH by NH(2) are successfully characterized. Information of the protein-backbone molecular mass has been combined with results from peptide analysis (revealing information about O-glycosylation) and from the glycan analysis, including the detection of as yet undescribed glycans containing four antennae and five sialic acids. This allows an unequivocal assignment of an overall glycosylation composition to the molecular masses obtained for the intact rHuEPO glycoforms.

Novel adsorptive polyamine coating for enhanced capillary electrophoresis of basic proteins and peptides

In capillary electrophoresis (CE), the anionic and hydrophobic nature of the fused-silica capillary surface has long been known to present a problem in protein and peptide analysis. The use of capillary surface coating is one of the approaches to avoid the analyte-wall interactions. In this study, a new polymer, poly-LA 313, has been synthesized, physico-chemical characterized, and applied as polyamine coating for CE separations. The coating process is highly reproducible and provides fast separations of peptides and proteins in a few minutes and with high efficiency. The physically adsorbed polymer gives rise to a durable coating in the range of pH 2-10, in the presence of organic modifiers (acetonitrile and methanol) and with complex biological samples. The efficiency of the new cationic polymer was also tested performing protein and peptide separations with capillary electrophoresis-electrospray ionization-mass spectrometry (CE-ESI-MS).

Fractionation of glycoforms of recombinant human erythropoietin by preparative capillary isotachophoresis

This feasibility study deals with the use of preparative capillary isotachophoresis (CITP), operating in a discontinuous fractionation mode, to the separations and isolations of glycoforms of recombinant human erythropoietin (rhEPO). The preparative CITP separations were monitored by capillary zone electrophoresis (CZE) with a hydrodynamically closed separation unit. Such a CZE system, suppressing fluctuations of the migration data linked with fluctuations of EOF and hydrodynamic flow, made possible to evaluate and compare the preparative CITP separations performed within a longer time frame. Preparative CITP, carried out in the separation unit with coupled columns of enhanced sample loadability, separating 100 microg of rhEPO in a run lasting ca. 30 min, gave the production rate higher than 55 ng/s for the rhEPO glycoforms. The preparative separations included valve isolations of the glycoforms from the ITP stack into four or six fractions. Such numbers of the fractions corresponded to typical numbers of the major glycoform peaks as resolved in CZE of rhEPO. With respect to close effective mobilities of the glycoforms and a multicomponent nature of rhEPO, the fractions contained mixtures of glycoforms with the dominant glycoforms enriched 10-100-fold, relative to the original rhEPO sample.

Glycoform characterization of intact erythropoietin by capillary electrophoresis-electrospray-time of flight-mass spectrometry

Glycosylated proteins often show a large variation in their glycosylation pattern, complicating their structural characterization. In this paper, we present a method for the accurate mass determination of intact isomeric glycoproteins based on capillary electrophoresis-electrospray-time of flight-mass spectrometry. Human recombinant erythropoietin has been chosen as a showcase. The approach enables the on-line removal of nonglycosylated proteins, salts, and neutral and negatively charged species. More important, different glycosylation forms are separated both on the base of differences in the number of negatively charged sialic acid residues and the size of the glycans. Thus, 44 glycoforms and in total about 135 isoforms of recombinant human erythropoietin, taking also acetylation into account, could be distinguished for the reference material from the European Pharmacopeia. Distinct glycosylation differences for samples from different suppliers are clearly observed. Based on the accurate mass an overall composition of each single isoform is proposed, perfectly in agreement with data on glycan and glycopeptide analysis. This method is an ideal complement to the established techniques for glycopeptide and glycan analysis, not differentiating branching or linkage isoforms, but leading to an overall composition of the glycoprotein. The presented strategy is expected to improve significantly the ability to characterize and quantify isomeric glycoforms for a large variety of glycoproteins.

Capillary electrophoresis-mass spectrometry of basic proteins using a new physically adsorbed polymer coating. Some applications in food analysis

A new physically adsorbed capillary coating for capillary electrophoresis-mass spectrometry (CE-MS) of basic proteins is presented, which is easily obtained by flushing the capillary with a polymer aqueous solution for two min. This coating significantly reduces the electrostatic adsorption of a group of basic proteins (i.e., cytochrome c, lysozyme, and ribonuclease A) onto the capillary wall allowing their analysis by CE-MS. The coating protocol is compatible with electrospray inonization (ESI)-MS via the reproducible separation of the standard basic proteins (%RSD values (n = 5) < 1% for analysis time reproducibility and < 5% for peak heights, measured from the total ion electropherograms (TIEs) within the same day). The LODs determined using cytochrome c with total ion current and extracted ion current defection were 24.5 and 2.9 fmol, respectively. Using this new coating lysozymes from chicken and turkey egg white could be easily distinguished by CE-MS, demonstrating the usefulness of this method to differentiate animal species. Even after sterilization at 120 degrees C for 30 min, lysozyme could be detected, as well as in wines at concentrations much lower than the limit marked by the EC Commission Regulation. Adulteration of minced meat with 5% of egg-white could also be analysed by our CE-MS protocol.

A polyamine coating for enhanced capillary electrophoresis-electrospray ionization-mass spectrometry of proteins and peptides

A procedure for enhanced capillary electrophoresis-electrospray ionization-mass spectrometry (CE-ESI-MS) of proteins is presented. The use of a newly presented capillary coating, PolyE-323, provided fast separations of typically a few minutes with high efficiency, good deactivation, and no bleeding into the mass spectrometer. Capillaries coated with PolyE-323 showed high stability over a range of pH 2-10, and tolerance towards methanol and acetonitrile, two modifiers commonly used in CE-ESI-MS. Due to the speed and simplicity of the coating procedure, the polymeric surface could, if necessary, easily be regenerated. This capability is especially valuable when working with samples of complex matrix, where a capillary surface cleaning step might be desired in order to eliminate possible memory effects. The potential of PolyE-323-coated capillaries in bioanalysis using CE-ESI-MS was demonstrated by analyzing peptides and proteins up to 66 kDa using time of flight (TOF)-MS. Due to the stable, anodal electroosmotic flow generated by the coating, the use of a sheathless ESI interface was enabled, demonstrated in peptide analysis with attomole sensitivity. The fast on-line CE-ESI-TOF system using PolyE-323-coated capillaries provided efficient separation and detection of a large number of peaks in a short time, exemplified by the analysis of a tryptic digest of bovine serum albumin (BSA). The capability of the developed capillary surface coating was demonstrated by the separation of human plasma and cerebrospinal fluid (CSF).

Analysis of calcitonin and its analogues by capillary zone electrophoresis and matrix-assisted laser-desorption ionization time-of-flight mass spectrometry

Capillary zone electrophoretic (CZE) separations and mass spectrometric analysis of salmon calcitonin and related analogues were performed to generate electrophoresis and mass fingerprints for quality control of the recombinant polypeptide pharmaceutical salmon calcitonin. The calcitonins and their corresponding tryptic digests were successfully separated by CZE at low pH in fused silica capillaries dynamically modified with poly-cationic polymers. The poly-cationic modified inner surface of the fused silica capillaries generated a strong anionic electroosmotic flow (EOF). Analytes of negative, neutral, and positive charge were all swept through the capillary toward the positive electrode. Compared to Polybrene-coated capillaries, capillaries coated with PEI showed a markedly slower but much more stable electroosmotic flow. The migration order of the analytes was predicted by comparing approximate values of the charge to (molecular mass)2/3 ratios. The predicted migration order was confirmed by off-line analysis of CZE fractions with matrix-assisted laser-desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS).

Differences in capillary electrophoresis profiles of urinary and recombinant erythropoietin

Different profiles were obtained by capillary zone electrophoresis (CZE) of human erythropoietin (EPO) of recombinant and urinary origin. To unambiguously detect doping by EPO, direct methods able to determine the presence of the drug itself in a physiological fluid are required. Since the host cell line used for EPO production influences its glycosylation, the carbohydrate distribution of natural human EPO may be different from that of recombinant EPO. The different content in sialic acid groups between recombinant and endogenous EPO provide a basis for their distinction by CZE.

Liquid chromatography-mass spectrometry and capillary electrophoresis combined approach for separation and characterization of multicomponent peptide mixtures. Application to crude products of leuprolide synthesis

A sequential combination of reversed-phase liquid chromatography-mass spectrometry (LC-MS) and capillary electrophoresis (CE) has been explored in order to perform separation and characterization of a multicomponent peptide mixture from the synthesis of leuprolide. The mixture was first analyzed and fractionated by LC-MS, and the collected fractions were subsequently separated by CE. Unambiguous identification of the electrophoretic peaks was achieved by injecting the collected fractions separately and spiking the leuprolide crude mixture. Furthermore, structural information about the components of the mixture provided by several semi-empirical migration models has been used to check the accuracy of the structures previously proposed by LC-MS. Combination of the two orthogonal techniques results in an enhancement of their individual selectivity characteristics.

Capillary electrophoretic analysis of proteins and peptides of biomedical and pharmacological interest

Capillary electrophoresis (CE) is an automated approach to electrokinetic separations that has had a deep impact in all fields of life sciences, including biomedical and biotechnological research and clinical and forensic practice. The present review highlights aspects of peptides and proteins separations, with particular emphasis on macromolecular analytes of biomedical interest. Among the various CE techniques available, a novel methodology is here illustrated consisting in separations in acidic, isoelectric buffers, which have the advantage of protonating the silica wall, thus minimizing interactions of proteinaceous material with the siliceous surface, while allowing delivery of high voltage gradients, due to their low conductivities. The review ends with applications of CE to the analysis of folding/unfolding/refolding/misfolding of proteins, a field which has deep implications in the biomedical arena, since it is connected to a host of disorders, such as prion protein diseases.

Applications of capillary electrophoresis in biotechnology

Capillary electrophoresis (CE)-related techniques are increasingly being used as a matter of routine practice in the biotechnology discipline. Since recombinant DNA-derived proteins and the antisense oligonucleotides constitute a large portion of the applications of these techniques, they have been emphasized in this review. Analyses by CE of Escherichia coli-derived proteins and glycosylated proteins derived from mammalian cell cultures are summarized, as well as those of the carbohydrate chains that have been enzymatically removed from the protein. Applications of CE in the analysis of the antisense oligonucleotides for the determination of purity and the analytical studies on the metabolism of these modified oligonucleotides, by CE are reviewed. The literature mainly covers the period from 1996.

Capillary electrophoresis of proteins for proteomic studies

Analyses of proteins in complex mixtures such as cell lyzates are presently performed mainly by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. For structural analysis, each protein in a spot is digested with proteases and the fragment peptides are subjected to Edman sequencing and/or mass spectrometry. These works aim at the total analysis of proteins in a complex mixture and reconstruction of their cooperative functions. Genomic studies are now being combined with these proteomic studies. This review article focuses on the application of capillary electrophoresis aiming at the total analysis of complex protein systems or structural analysis of each separated protein. From this viewpoint, articles on capillary zone electrophoresis, capillary isoelectric focusing, and sieving SDS capillary electrophoresis are reviewed. Since these techniques of capillary electrophoresis have been thoroughly reviewed previously, papers published in 1997 and 1998 are mainly covered.