Analyte identification in capillary electrophoretic separation techniques

Identity verification of monoclonal antibodies by triple injection capillary zone electrophoresis

This paper presents an approach based on triple injection capillary zone electrophoresis for identification of monoclonal antibodies. The analyte to be identified is injected between two zones of a known reference. The distances between the reference zones (plug I and III) and the target zone (plug II) are adjusted by partial electrophoresis of the first and second injection plugs. The full migration time of the target analyte is calculated from the observed migration time by considering the migration times of the reference in the first and third injection plugs. The relative migration time, that is, the ratio between the full migration time of the analyte and the migration time of the reference in the third injection plug provides the basis for identification. Here, eight monoclonal antibodies, including a pair of biosimilars, were used interchangeably as both analyte and reference to investigate potential of the method. The relative migration time for a preliminary positive identification were found to vary between 0.994 and 1.006 (1.000 ± 0.006, p = 95%). Beside the relative migration time, isoform distribution, peak profiles, and early migrating peaks, originating from components in the pharmaceutical formulations, were successfully used to verify the identity of all tested monoclonal antibodies.

An innovative detection technique for capillary electrophoresis: Localized terahertz emission-time domain spectroscopy

Terahertz (THz) time-domain spectroscopy (TDS) is a recently emerging analysis method which can provide unique information on molecular vibration and rotation induced by inter/intra-molecular interactions. Although the application of THz-TDS to high-performance microscale separation methods like capillary electrophoresis (CE) has been anticipated, it has been hindered due to the diffraction limit of THz wave (typically, hundreds µm). In order to realize CE-THz-TDS, in this study, we placed a narrow open-tubular capillary on the surface of a GaAs semiconductor substrate as a "localized" THz-emitter. By focusing femtosecond pulsed laser beams at the surface of a gallium arsenide (GaAs) substrate closest to the capillary, THz waves were locally generated to pass through the capillary, so that THz absorbance spectra were obtained from the capillary which has narrower inner diameter than the diffraction limit. As a typical result from acetic acid analysis in the CE-THz-TDS platform, information on the refractive index and extinction coefficient was obtained, which showed non-linear and linear concentration dependence, respectively, similar to conventional THz-TDS using large liquid cells. Finally, CE-THz-TDS analysis of several carboxylic acids was demonstrated. Two acids were successfully separated and detected with THz-TDS, where their electrophoretic mobility values were estimated as close to those obtained with conventional contactless conductivity detection. Our proposed CE-THz-TDS showed the potential for the systematic analysis of inter/intra-molecular weak interactions like hydrogen bonds, which are unable to obtain with conventional detectors.

Advanced CE for chiral analysis of drugs, metabolites, and biomarkers in biological samples

An analysis of recent trends indicates that CE can show real advantages over chromatographic methods in ultratrace enantioselective determination of biologically active compounds in complex biological matrices. It is due to high separation efficiency and many applicable in-capillary electromigration effects in CE (countercurrent migration, stacking effects) enhancing significantly (enantio)separability and enabling effective sample preparation (preconcentration, purification, analyte derivatization). Other possible on-line combinations of CE, such as column coupled CE-CE techniques and implementation of nonelectrophoretic techniques (extraction, membrane filtration, flow injection) into CE, offer additional approaches for highly effective sample preparation and separation. CE matured to a highly flexible and compatible technique enabling its hyphenation with powerful detection systems allowing extremely sensitive detection (e.g. LIF) and/or structural characterization of analytes (e.g. MS). Within the last decade, more as well as less conventional analytical on-line approaches have been effectively utilized in this field and their practical potentialities are demonstrated on many new application examples in this article. Here, three basic areas of (enantioselective) drug bioanalysis are highlighted and supported by a brief theoretical description of each individual approach in a compact review structure (to create integrated view on the topic), including (i) progressive enantioseparation approaches and new enantioselective agents, (ii) in-capillary sample preparation (preconcentration, purification, derivatization), and (iii) detection possibilities related to enhanced sensitivity and structural characterization.

Capillary electrophoresis coupled on-line with ultraviolet resonance Raman spectroscopy

Capillary electrophoresis (CE) and resonance Raman spectroscopy (RRS) with excitation in the deep ultraviolet (UV) region (lambda(ex): 244 or 257 nm) were coupled on-line. The potential of this hyphenated technique, denoted as CE-UV-RRS, for analyte confirmation/identification purposes was explored with aromatic sulfonic acids and nucleotides as test compounds. Good-quality UV-RRS spectra could be recorded on-the-fly. Identification limits for the nucleotides were in the 10-125 microg/mL range. The RRS spectra showed sufficient characteristic features to enable analyte confirmation. In addition, the identification power of UV-RRS was studied with substituted pyrenes as model compounds. The compounds were distinguishable on the basis of their RRS spectra at 244 nm.

Capillary zone electrophoresis in wide bore capillary tubes with fiber-coupled diode array detection

This feasibility study deals with the use of a wide bore (320 microm I.D.) capillary tube for the detection and identification of capillary zone electrophoresis (CZE) analytes by optical fiber-coupled diode array detection. A 250-microm mean effective pathlength of the detection cell with an inherently enhanced photon flux through the cell were significant contributors in reaching 0.2-1 micromol/l concentration detectabilities of the CZE analytes by this combination. Experiments with model analytes (p-sulfanilic, sorbic and naphthalene-2-sulfonic acids, tryptophan and asulam) revealed that spectral confirmations of their identities were still possible when their concentrations in the loaded samples (200 nl) were 1-5 micromol/l. Here, chemometry procedures (target transformation factor analysis, fixed size moving window-target transformation factor analysis, fixed size moving window-evolving factor analysis and orthogonal projection approach) employed in the data processing effectively contributed to reliable confirmation of the identities of the analytes also in critical situations (e.g. peak overlaps). The CZE separations were carried out in tandem-coupled columns of identical I.D. This made it possible to use, in the first column of the tandem, carrier electrolyte solutions that provide the desired separative effects, while in the second (detection) column the compositions of the carrier electrolyte solutions employed could reflect favorable conditions for obtaining spectral data. Mixtures containing model constituents at significantly differing concentrations and Maillard's reaction products spiked with tryptophan enantiomers were employed in experiments aimed at assessing practical applicabilities and limits of the present approach to the analysis of samples characterized by complex ionic matrices.

Laser-based non-fluorescence detection techniques for liquid separation systems

Over the last two decades, the possibility to use lasers for detection purposes in column liquid chromatography (LC) and capillary electrophoresis (CE) received much attention in the analytical chemistry literature. Most attention has been devoted to laser-induced fluorescence. The present review covers developments on non-fluorescence techniques for LC and CE. The techniques considered are thermal lens spectrometry, photoacoustic detection, refractive index detection including refractive index backscattering, Raman spectroscopy and degenerate four-wave mixing (a special mode of transientholographic spectroscopy). The paper starts with an outline of the characteristics of lasers; it ends with an overall evaluation and a discussion of the perspectives of the techniques dealt with.

Separation and identification methods for metalloproteinase inhibitors

Metalloproteinase inhibitors are being explored for the treatment of a wide variety of human diseases including cancers, arthritis, cardiovascular disorders, human immunodeficiency virus infection, and central nervous system illnesses. This review provides an overview of various analytical sample preparation, separation, detection, and identification techniques employed for the quantitative and qualitative determination of these inhibitor compounds. Special emphasis is placed on biological sample preparation by automated solid-phase extraction, liquid-liquid extraction, and protein precipitation by centrifugation or filtration. Other sample preparation methodologies are also evaluated. Applications of high-performance liquid chromatography. gas chromatography, and capillary electrophoresis to the quantitative determination of metalloproteinase inhibitors are described. Examples of qualitative analysis of metalloproteinase inhibitors by hyphenated liquid chromatography with mass spectrometry and nuclear magnetic resonance are also presented. The advantages and limitations of these separation and identification methodologies as well as other less frequently employed techniques are assessed and discussed.

Spatially focused deposition of capillary electrophoresis effluent onto surface-enhanced Raman-active substrates for off-column spectroscopy

Surface-enhanced Raman scattering (SERS) is employed to obtain distinctive spectra of compounds that are efficiently separated by capillary electrophoresis (CE) and deposited onto planar SERS-active substrates. A simple method is described that explains how to prepare SERS-active substrates by depositing a silver-colloid solution onto frosted-glass microscope slides, using a high-efficiency nebulizer. Scanning electron micrographs reveal a layered coating of fairly uniform-sized, 100-nm silver nanoparticles with interstitial spaces ranging from a few to tens of nanometers. The on-column separation is monitored by laser-induced fluorescence, while electrofilament depositing the CE effluent onto a moving SERS-substrate. Subsequently, the SERS spectra and off-column electropherograms are obtained with a simple confocal Raman spectrometer. The test compounds used to demonstrate this technique include compounds of biological significance: benzyloxyresorufin, riboflavin, and resorufin. CE and Raman conditions are evaluated to determine their affects on the SERS signals. An average off-column efficiency of 100,000 plates/m and a signal reproducibility of 11% relative standard deviation were achieved. Characteristic spectra with major Raman bands exhibiting signal-to-noise ratios of greater than 3 were obtained for a 3.2-nL injection of 10(-6) M (706 fg) resorufin. Forming a self-assembled monolayer (SAM) on the substrate increases the sensitivity of the SERS technique and decreases the on-substrate broadening. Calibration plots for both plain- and SAM-SERS substrates are demonstrated.

Capillary zone electrophoresis of orotic acid in urine with on-line isotachophoresis sample pretreatment and diode array detection

Potentialities of capillary zone electrophoresis with on-line isotachophoresis sample pretreatment and diode array detection (ITP-CZE-DAD) to the separation, detection and identification of trace analytes present in biological matrices were investigated. Urine represented a multicomponent, variable and high ionic strength matrix while orotic acid was chosen as a model analyte of a practical clinical relevance in this investigation. Using the ITP-CZE combination in the column-coupling configuration of the separation system ITP provided an enhanced sample load capacity to the separation system (a 30 microl sample injection volume), concentrated the analyte and served as an on-line sample clean up technique. On the other hand, CZE performed a final separation of the analyte from matrix constituents present in the ITP pretreated sample and provided favorable conditions for its detection and identification by DAD. Using current correction and smoothing procedures analytically relevant DAD spectra of orotic acid could be obtained also in instances when this was injected in a model sample at a 2 x 10(-7) mol/l concentration (an estimated limit of determination of orotic acid at a 218 nm detection wavelength). ITP-CZE separations of urine samples (based on differences in acid-base properties and host-guest complexations of the analyte and matrix anionic constituents) led to significant sample clean ups. Consequently, DAD spectra of orotic acid matching its reference spectrum, could be acquired also in instances when the acid was present in urine matrices (loaded in 30 microl injection volumes of 20-fold diluted urine samples) at 4-6 x 10(-7) mol/l concentrations. Here, residual trace matrix interferents prevented a closer approach to the above value attainable for model samples. Although this work was focused only on one analyte and urine matrix it implies very promising potentialities of the ITP-CZE-DAD combination in the identification and quantitation of trace analytes present in biological matrices, in general.

Laser-induced dispersed fluorescence detection of polycyclic aromatic compounds in soil extracts separated by capillary electrochromatography

Polycyclic aromatic hydrocarbons (PAHs) and nitrogen containing aromatic compounds (NCACs) are characterized in soil extracts and laboratory standards by capillary electrochromatography (CEC) with laser-induced dispersed fluorescence (LIDF) detection using a liquid-nitrogen cooled charge-coupled device detector. The LIDF detection technique provides information on compound identity and, when coupled with the high separation efficiencies of the CEC technique, proves useful in the analysis of complex mixtures. Differences in fluorescence spectra also provide a means of identifying co-eluting compounds by using deconvolution algorithms. Detection limits range from 0.5 to 96x10(-10) M for selected PAHs and 0.9-3.7x10(-10) M for selected NCACs. Soil extracts are also injected onto the CEC column to evaluate chromatographic method performance with respect to complex samples and the ability to withstand exposure to environmental samples.

Fluorescence line-narrowing detection in chromatography and electrophoresis

A review of the basic aspects of fluorescence line-narrowing spectroscopy (FLNS) and its coupling with thin-layer chromatography (TLC) and polyacrylamide gel electrophoresis (PAGE) for off-line high-resolution low temperature spectral characterization is discussed. This is followed by a description of the on-line interfacing of capillary electrophoresis (CE) and capillary electrochromatography (CEC) with FLN detection. CE/ CEC-FLNS instrumentation and its applications for spectral identification of closely related analytes are also presented. Future prospects of micro and capillary high performance liquid chromatography (HPLC) with on-line high-resolution low temperature spectroscopic identification are considered.

Capillary electrophoresis of drugs: current status in the analysis of pharmaceuticals

The current status of capillary electrophoresis (CE) in pharmaceutical analyses is reviewed with about 300 references, mainly from 1996 until 1999. This article covers the use of CE for assay and purity determination of the main component, analysis of natural medicines, antisense DNA, peptides, and proteins. Analysis of hydrophobic and/or electrically neutral drugs by electrokinetic chromatography, capillary electrochromatography and nonaqueous CE is critically evaluated. Detailed techniques for the separation of enantiomers are given in the text with some actual applications. Furthermore, this review includes sensitivity and regulatory aspects for the actual use of CE in new drug applications (NDA). The analytical validation required for CE in NDA is also treated.

Identification, quantitation, and characterization of biomolecules by capillary electrophoretic analysis of binding interactions

The high resolving power of capillary electrophoresis combined with the specificity of binding interactions may be used with advantage to characterize the structure-function relationship of biomolecules, to quantitate specific analytes in complex sample matrices, and to determine the purity of pharmaceutical and other molecules. We here review recent and innovative methodologies and applications of high resolution affinity electrophoresis within the fields of binding constant determination, structure-activity studies, quantitative microassays, analysis of drug purity and protein conformation, and immobilized affinity ligands. Despite the virtues of these approaches with respect to applicability, resolving power, speed, and low sample consumption, problems remain with respect to analyte identification and low concentration limits of detection. The ongoing development of new detector technologies for capillary electrophoresis such as mass spectrometry, and possibly nuclear magnetic resonance and other spectroscopic methods, is therefore very promising for the continued increased use of affinity capillary electrophoresis.

Capillary electrophoresis in drug analysis

Capillary electrophoresis has become one of the advanced analytical methods for drugs in pharmaceutical, therapeutic, diagnostic and forensic applications. This review discusses key issues and provides key references to the topic of drug analysis using capillary electrophoresis. It gives readers a brief summary of the current status of the technology and serves as an editorial for the paper symposium "Capillary electrophoresis in drug analysis".