Capillary electrophoresis of synthetic peptide standards varying in charge and hydrophobicity

Mixed-mode hydrophilic interaction/cation-exchange chromatography: separation of complex mixtures of peptides of varying charge and hydrophobicity

Mixed-mode hydrophilic interaction/cation-exchange chromatography (HILIC/CEX) was applied to the separation of two mixtures of synthetic peptide standards: (i) a 27-peptide mixture containing three groups of peptides (each group containing nine peptides of the same net charge of +1, +2 or +3), where the hydrophilicity/hydrophobicity of adjacent peptides within the groups varied only subtly (generally by only a single carbon atom); and (ii) peptide pairs with the same composition but different sequences, where the sole difference between the peptides was the position of a single amino acid substitution. HILIC/CEX is essentially CEX chromatography in the presence of high levels of organic modifier (generally ACN). The present study demonstrated the dramatic effect of increasing ACN concentration (optimum levels of 60-80%, depending on the application) on the separation of both mixtures of peptides. The greater the charge on the peptides, the better the separation achievable by HILIC/CEX. In addition, HILIC/CEX separation of both the peptide mixtures used in the present study was shown to be superior to that of the more commonly applied RP-HPLC mode. Our results highlight again the efficacy of HILIC/CEX as a peptide separation mode in its own right as well as an excellent complement to RP-HPLC.

Ion-interaction CZE: the presence of high concentrations of ion-pairing reagents demonstrates the complex mechanisms involved in peptide separations

We have furthered our understanding of the separative mechanism of a novel CE approach, termed ion-interaction CZE (II-CZE), developed in our laboratory for the resolution of mixtures of cationic peptides. Thus, II-CZE and RP-HPLC were applied to the separation of peptides differing by a single amino acid substitution in 10- and 12-residue synthetic model peptide sequences. Substitutions differed by a wide range of properties or side-chain type (e.g., alkyl side-chains, polar side-chains, etc.) at the substitution site. When carried out in high concentrations (400 mM) of pentafluoropropionic acid (PFPA), II-CZE separated peptides in order of increasing hydrophobicity when the substituted side-chains were of a similar type; when II-CZE was applied to the mixtures of peptides with substitutions of side-chains that differed in the type of functional group, there was no longer a correlation of electrophoretic mobility in II-CZE with relative peptide hydrophobicity, suggesting that a third factor is involved in the separative mechanism beyond charge and hydrophobicity. Interestingly, the hydrophobic PFPA- anion is best for separating peptides that differ in hydrophobicity with hydrophobic side-chains but high concentrations of the hydrophilic H2PO4- anion are best when separating peptides that differ in polar side-chains relative to hydrophobic side-chains. We speculate that differential hydration/dehydration properties of various side-chains in the peptide and the hydration/dehydration properties of the hydrophilic/hydrophobic anions as well as the electrostatic attractions between the peptide and the anions in solution all play a critical role in these solution-based effects.

HPLC analysis and purification of peptides

High-performance liquid chromatography (HPLC) has proved extremely versatile over the past 25 yr for the isolation and purification of peptides varying widely in their sources, quantity and complexity. This article covers the major modes of HPLC utilized for peptides (size-exclusion, ion-exchange, and reversed-phase), as well as demonstrating the potential of a novel mixed-mode hydrophilic interaction/cation-exchange approach developed in this laboratory. In addition to the value of these HPLC modes for peptide separations, the value of various HPLC techniques for structural characterization of peptides and proteins will be addressed, e.g., assessment of oligomerization state of peptides/proteins by size-exclusion chromatography and monitoring the hydrophilicity/hydrophobicity of amphipathic alpha-helical peptides, a vital precursor for the development of novel antimicrobial peptides. The value of capillary electrophoresis for peptide separations is also demonstrated. Preparative reversed-phase chromatography purification protocols for sample loads of up to 200 mg on analytical columns and instrumentation are introduced for both peptides and recombinant proteins.

Recent developments in capillary electrophoresis and capillary electrochromatography of peptides

The article gives a comprehensive review on the recent developments in the applications of high-performance capillary electromigration methods, zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography, to analysis, preparation, and physicochemical characterization of peptides. The article presents new approaches to the theoretical description and experimental verification of electromigration behavior of peptides, covers the methodological aspects of capillary electroseparations of peptides, such as rational selection of separation conditions, sample preparation, suppression of peptide adsorption, new developments in individual separation modes, and new designs of detection systems. Several types of applications of capillary electromigration methods to peptide analysis are presented: conventional qualitative and quantitative analysis, purity control, determination in biomatrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid and sequence analysis, and peptide mapping of proteins. Some examples of micropreparative peptide separations are given and capabilities of capillary electromigration techniques to provide important physicochemical characteristics of peptides are demonstrated.

Recent advances in peptide and peptidomimetic stereoisomer separations by capillary electromigration techniques

As the stereochemistry of peptides determines their physicochemical properties and biological activities, analytical methods able to discriminate between peptide stereoisomers are important especially with regard to pharmaceutical peptides and peptidomimetics. The present review summarizes recent developments in peptide and peptidomimetic stereoisomer separations by capillary electromigration techniques. The majority of separations were performed by CE while only few reports have been published on the subject of electrochromatography. In addition to systematic studies on the applicability of certain buffer additives and the evaluation of specific experimental conditions, there have been attempts to understand the mechanistic aspects of peptide stereoisomer separations as well as to analyze the structure of peptide-CD complexes.

Ion-interaction-capillary zone electrophoresis of cationic proteomic peptide standards

We have employed a novel capillary electrophoresis (CE) approach recently developed in our laboratory, termed ion-interaction-capillary zone electrophoresis (II-CZE), to the resolution of a mixture of 27 synthetic cationic proteomic peptide standards. These peptides were comprised of three groups of nine peptides (with net charges of +1, +2 and +3 for all nine peptides within a group), the hydrophobicity of the nine peptides within a group varying only subtly between adjacent peptides. This bidimensional CE approach achieved excellent resolution of the peptides with high peak capacity by combining the powerful CZE mechanism located in the background electrolyte (BGE) with an hydrophobicity-based mechanism also located in the BGE, the latter consisting of high concentrations (up to 0.4M) of aqueous perfluorinated acids (trifluoroacetic acid, pentafluoropropionic acid and heptafluorobutyric acid). Thus, concomitant with a CZE separation of the three differently charged groups of peptides, there is an hydrophobically-mediated separation of the peptides within these groups effected through interaction of the hydrophobic anions of the perfluorinated acids with hydrophobic amino acid side-chains in the peptides. This methodology is dramatically different from other CE methods that have used complexing agents such as micelles or cyclodextrins in MEKC. Overall, the results presented here demonstrate the value of CE as a peptide separative tool in its own right, including its use for proteomic applications, and not merely as a complementary technique to reversed-phase high-performance liquid chromatography (RP-HPLC).

Combined solid-phase extraction and 2D LC–MS for characterization of the neuropeptides in rat-brain tissue

A comprehensive two-dimensional capillary liquid chromatographic (2D LC) method has been established for determination of neuropeptides in rat brain tissue. Rats were exposed to different levels of stress before sacrificing and the aim of this study was to design a powerful separation and detection technique capable of characterizing differences between cerebral neuropeptide expression as a function of stress level. Rat brain samples were homogenized and subjected to clean-up by solid-phase extraction (SPE) on both a reversed-phase (C(18)) and a weak cation-exchange (CBA) cartridge. The samples were divided in two fractions (A and B) depending on retention on the CBA column. Subsequently, 50 microL of the sample were injected on to a strong cation exchanger (SCX) at a mobile phase pH of 3, which enabled preconcentration of positively charged compounds. The trapped compounds were eluted using step gradients of ammonium formate in water-ACN (90:10, v/v). Before enrichment in the second dimension, the eluate from the first dimension was diluted with water containing 0.1% TFA. The compounds eluting from the first dimension were trapped in the second dimension using a dual precolumn system consisting of two short capillary columns packed with Kromasil C(18), 10 microm particles. Subsequently, the trapped compounds were backflushed on to a 10 cm long, 320 microm I.D. analytical column packed with Kromasil C(18) 3.5 microm particles, on which they were efficiently separated. Detection was performed using an ion-trap mass spectrometer (ITMS) in both the MS and the MS-MS mode. Comparison of base-peak chromatograms (BPC) from MS analysis of stressed and non-stressed rats clearly revealed several differences in neuropeptide expression. The MS-MS data obtained combined with Mascot software were employed for peptide identification.

Capillary zone electrophoresis of α-helical diastereomeric peptide pairs with anionic ion-pairing reagents

The present study uses an unique capillary electrophoresis (CE) approach, that we have termed ion-interaction capillary zone electrophoresis (II-CZE), for the separation of diastereomeric peptide pairs where a single site in the centre of the non-polar face of an 18-residue amphipathic alpha-helical peptide is substituted by the 19 L- or D-amino acids. Through the addition of perfluorinated acids at very high concentrations (up to 400 mM), such concentration levels not having been used previously in chromatography or CE, to the background electrolyte (pH 2.0), we have been able to achieve baseline resolution of all 19 diastereomeric peptide pairs with an uncoated capillary. Since each diastereomeric peptide pair has the same sequence, identical mass-to-charge ratio and identical intrinsic hydrophobicity, such a separation by CZE has previously been considered theoretically impossible. Excellent resolution was achieved due to maximum advantage being taken of even subtle disruption of peptide structure/conformation (due to the presence of D-amino acids) of the non-polar face of the amphipathic alpha-helix and its interaction with the hydrophobic anionic ion-pairing reagents. In addition, due to the excellent resolution of diastereomeric peptide pairs by this novel CZE approach, we have also been able to separate a mixture of these closely-related alpha-helical peptides.