Enantiomeric separation by capillary electrochromatography using monolithic capillaries with sol-gel-glued cyclodextrin-modified silica particles

Past, present, and future developments in enantioselective analysis using capillary electromigration techniques

Enantioseparation of chiral products has become increasingly important in a large diversity of academic and industrial applications. The separation of chiral compounds is inherently challenging and thus requires a suitable analytical technique that can achieve high resolution and sensitivity. In this context, CE has shown remarkable results so far. Chiral CE offers an orthogonal enantioselectivity and is typically considered less costly than chromatographic techniques, since only minute amounts of chiral selectors are needed. Several CE approaches have been developed for chiral analysis, including chiral EKC and chiral CEC. Enantioseparations by EKC benefit from the wide variety of possible pseudostationary phases that can be employed. Chiral CEC, on the other hand, combines chromatographic separation principles with the bulk fluid movement of CE, benefitting from reduced band broadening as compared to pressure-driven systems. Although UV detection is conventionally used for these approaches, MS can also be considered. CE-MS represents a promising alternative due to the increased sensitivity and selectivity, enabling the chiral analysis of complex samples. The potential contamination of the MS ion source in EKC-MS can be overcome using partial-filling and counter-migration techniques. However, chiral analysis using monolithic and open-tubular CEC-MS awaits additional method validation and a dedicated commercial interface. Further efforts in chiral CE are expected toward the improvement of existing techniques, the development of novel pseudostationary phases, and establishing the use of chiral ionic liquids, molecular imprinted polymers, and metal-organic frameworks. These developments will certainly foster the adoption of CE(-MS) as a well-established technique in routine chiral analysis.

Advances in Chiral Separations at Nano Level

Background::

Nano level chiral separation is necessary and demanding in the development of the drug, genomic, proteomic, and other chemical and the environmental sciences. Few drugs exist in human body cells for some days at nano level concentrations, that are out of the jurisdiction of the detection by standard separation techniques. Likewise, the separation and identification of xenobiotics and other environmental contaminants (at nano or low levels) are necessary for our healthiness.

Discussion:

Conclusion:

This article will be beneficial for chiral chromatographers, academicians, pharmaceutical industries, environmental researchers and Government regulation authorities.

Comparison of positively and negatively charged achiral co-monomers added to cyclodextrin monolith: improved chiral separations in capillary electrochromatography

Cyclodextrins (CDs) and their derivatives have been one of the most popular and successful chiral additives used in electrokinetic chromatography because of the presence of multiple chiral centers, which leads to multiple chiral interactions. However, there has been relatively less published work on the use of CDs as monolithic media for capillary electrochromatography (CEC). The goal of this study was to show how the addition of achiral co-monomer to a polymerizable CD such as glycidyl methacrylate β-cyclodextrin (GMA/β-CD) can affect the enantioselective separations in monolithic CEC. To achieve this goal, polymeric monoliths columns were prepared by co-polymerizing GMA/β-CD with cationic or anionic achiral co-monomers [(2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) and vinyl benzyltrimethyl-ammonium (VBTA)] in the presence of conventional crosslinker (ethylene dimethacrylate) and ternary porogen system including butanediol, propanol and water. A total of 34 negatively charged compounds, 30 positively charged compounds and 33 neutral compounds were screened to compare the enantioresolution capability on the GMA/β-CD, GMA/β-CD-VBTA and GMA/β-CD-AMPS monolithic columns.

Cyclodextrin-mediated enantioseparations by capillary electrochromatography

Immobilized cyclodextrin derivatives are used as chiral selectors in various modes of capillary electrochromatography (CEC). The present chapter describes three techniques in detail utilizing CDs in CEC: (1) open-tubular capillary electrochromatography (o-CEC), (2) packed capillary electrochromatography (p-CEC), and (3) monolithic capillary electrochromatography (rod-CEC). Nanoparticle pseudostationary phase capillary electrochromatography (psp-CEC) is briefly discussed.

Evaluation of a methacrylate-bonded cyclodextrins as a monolithic chiral stationary phase for capillary electrochromatography (CEC)-UV and CEC coupled to mass spectrometry

Glycidyl methacrylate-bonded β-cyclodextrin (GMA-β-CD) is synthesized as a new chiral monomer by direct chemical bonding with GMA using a fast and simple alternative procedure. Next, rigid and homogenous monolithic columns were prepared by polymerization of GMA-β-CD monomer with ethylene dimethacrylate (EDMA), in the presence of commonly used porogens and a charged achiral monomer to form a versatile chiral monolith. This is the first report in which a preparation procedure for a methacrylate-bonded CD is introduced for chiral separations in CEC. The degree of substitution of GMA-β-CD monomer and mobile-phase parameters were optimized to achieve the highest enantioselectivity and plate number. To evaluate the GMA-β-CD monolithic column, different classes of chiral compounds were screened. Under the optimized β-CD monolith phase and the optimum mobile-phase conditions, 30 neutral and basic chiral compounds and two acidic compounds could be separated. The high chemical and mechanical stability, homogenous microflow and no loss of material at the interface allows for the first time the feasibility of applying this polymer-based monolithic column for CEC coupled to ESI-MS. Compared with CEC-UV, CEC-ESI-MS showed higher sensitivity and lower resolution. However, resolution greater than 1.0 can still be obtained for majority of the select tested compound in CEC-ESI-MS with at least three out of seven compound providing Rs≥1.5. The results reinforce the potential of GMA-β-CD monolithic columns for chiral separations with high sensitivity in CEC-ESI-MS. Finally, using hexobarbital as the model chiral analyte, the monolithic column demonstrated excellent stability and reproducibility of retention time and enantioselectivity.

Chiral separations by CE employing CDs

This paper summarizes the history of chiral separations done by using electromigration methods with CDs. Several enantioresolution mechanisms and a wide number of chiral selectors have been applied to the separation of optical isomers by CE. Among them inclusion-complexation with CDs or their derivatives played a very important role in CE. Since the beginning our group was involved in studying method optimization for enantiomer resolution by using these chiral selectors. One of our publications was the basis for further development in the field, at least for us. New chiral selectors, development of theory, new methodological approaches and a wide number of practical applications are the main results achieved in the last almost 25 years using CE as an enantioseparative technique.

Monolithic enantiomer-selective stationary phases for capillary electrochromatography

Monolithic materials have become a well-established format for stationary phases in the field of capillary electrochromatography. Four types of monoliths, namely particle-fixed, silica-based, polymer-based, and molecularly imprinted monoliths, have been utilized as enantiomer-selective stationary phases in CEC. This review summarizes recent developments in the area of monolithic enantiomer-selective stationary phases for CEC. The preparative procedure and the characterization of these columns are highlighted. In addition, the disadvantages and limitations of different monolithic enantiomer-selective stationary phases in CEC are briefly discussed.

Recent accomplishments in the field of enantiomer separation by CEC

The present review intends to summarize recent developments in the field of enantioselective separations and analysis by CEC. It covers studies published in English language in common peer-reviewed journals within the period between 2003 and 2006. Both, methods making use of chiral mobile phase additives as well as chiral stationary phases for electrochromatographic enantiomer separations, are reviewed. Achievements that have been made on the various column technologies, such as open-tubular, particle-packed, inorganic, organic and particle-fixed (hybrid-type) monolithic as well as molecularly imprinted polymer phases, are discussed.

Recent development of monolithic materials as matrices in microcolumn separation systems

This review summarizes the development of monolithic materials, including both organic and inorganic polymers, according mainly to the papers published in the past two years. Due to their good permeability, fast mass transfer, high stability, and their ease of modification, such materials have been widely used in microcolumn separation systems, not only as stationary phases for CEC and capillary HPLC, but also as substances for sample concentration and enzyme reactor. All the research results demonstrate that monolithic materials in microseparation systems can be expected to play an increasingly important role in the analysis of complex samples.

Advances in chiral separation using capillary electromigration techniques

This review gives an overview of recent developments in CZE, EKC, and CEC covering the literature since the year 2004. Since there appeared a special issue on applications, this review focuses on the progress in electromigration techniques and new methodological developments. New techniques, new chiral selectors as well as new chiral stationary phases for CEC are discussed.

Perphenylcarbamoylated β-cyclodextrin bonded-silica particles as chiral stationary phase for enantioseparation by pressure-assisted capillary electrochromatography

Perphenylcarbamoylated beta-cyclodextrin bonded-silica particles (5 microm) were packed into 75-mum fused-silica capillaries, and used for the enantiomer separation of neutral and basic solutes by pressure-assisted capillary electrochromatography. Triethylammonium acetate and phosphate buffer were employed as the BGEs. A cathodic EOF was observed with these two BGEs. Seven chiral analytes were successfully resolved into their enantiomers under optimized conditions, and five of them could be baseline-separated within 12 min due to their high electrophoretic mobility. Better results were achieved with phosphate buffer as the BGE. The effects of organic content and pH on the enantioseparation were also investigated.

Enantiomer separation on monolithic silica HPLC columns using chemically bonded methylated and methylated/acetylated 6-O-tert-butyldimethyl- silylated β-cyclodextrin

A new 2,3-methylated 3*-monoacetylated 6-O-tert-butyldimethylsilylated beta-CD derivative was synthesized and chemically bonded onto aminopropyl derivatized monolithic silica HPLC columns. In this CD derivative, only one of seven methyl groups in 3-position was substituted by an acetyl group. Its applicability as a chiral stationary phase for HPLC was tested and compared with exclusively 2,3-methylated 6-O-tert-butyldimethylsilylated beta-CD immobilized onto aminopropyl-modified monoliths. Thirty-two chiral compounds from different chemical classes and different functionalities were tested under RP conditions. Fourteen compounds were resolved into their enantiomers by methylated 6-O-tert-butyldimethylsilylated beta-CD. By use of methylated/acetylated 6-O-tert-butyldimethylsilylated beta-CD as the chiral stationary phase 7 analytes were successfully stereodifferentiated.

Comparison of monolithic approaches for enantioselective capillary electrochromatography involving cyclodextrins

The access to CD-modified monoliths for enantiomeric separation by CEC can be divided into two main approaches. (i) Silica-based monoliths, prepared by either a sol-gel process or by sintering of silica particles, are modified after fabrication by coating with a CD selector. Alternatively the fusion of CD functionalized silica particle via gluing is feasible. (ii) Rigid or homogeneous organic polymer-based monoliths, prepared by polymerization of organic monomers in the presence of a porogen, are modified with the CD selector either by copolymerization or by physical incorporation into the continuous bed.