Determination of tertiary amines based on pH junctions and field amplification in capillary electrophoresis with electrochemiluminescence detection

Tris(2,2'-bipyridyl)ruthenium (II) complex as a universal reagent for the fabrication of heterogeneous electrochemiluminescence platforms and its recent analytical applications

In recent years, electrochemiluminescence (ECL) has received enormous attention and has emerged as one of the most successful tools in the field of analytical science. Compared with homogeneous ECL, the heterogeneous (or solid-state) ECL has enhanced the rate of the electron transfer kinetics and offers rapid response time, which is highly beneficial in point-of-care and clinical applications. In ECL, the luminophore is the key element, which dictates the overall performance of the ECL-based sensors in various analytical applications. Tris(2,2'-bipyridyl)ruthenium (II) complex, Ru(bpy)32+, is a coordination compound, which is the gold-standard luminophore in ECL. It has played a key role in translating ECL from a "laboratory curiosity" to a commercial analytical instrument for diagnosis. The aim of the present review is to provide the principles of ECL and classical reaction mechanisms-particularly involving the heterogeneous Ru(bpy)32+/co-reactant ECL systems, as well as the fabrication methods and its importance over solution-phase Ru(bpy)32+ ECL. Then, we discussed the emerging technology in solid-state Ru(bpy)32+ ECL-sensing platforms and their recent potential analytical applications such as in immunoassay sensors, DNA sensors, aptasensors, bio-imaging, latent fingerprint detection, point-of-care testing, and detection of non-biomolecules. Finally, we also briefly cover the recent advances in solid-state Ru(bpy)32+ ECL coupled with the hyphenated techniques.

A two-electrode system-based electrochemiluminescence detection for microfluidic capillary electrophoresis and its application in pharmaceutical analysis

A two-electrode configuration powered by batteries was designed for a microchip capillary electrophoresis-electrochemiluminescence system. A home-made working electrode for end-column mode detection and wall-jet configuration was made up of a platinum wire (0.3 mm diameter) and a quartz capillary (320 µm internal diameter). The platinum wire served as a pseudoreference electrode. The configuration of the detection power supply comprised two D-size batteries (connected in series), a switch, and an adjustable resistor. The microchip consisted of two layers: the bottom layer was a glass sheet containing injection and separation channels; the upper layer was polydimethylsiloxane block. In order to reduce the loss of electrochemiluminescence signal, a coverslip (0.17 mm thickness) was used as the floor of the detection reservoir. The performance of the system was demonstrated by separation and detection of atropine, anisodamine and proline. The linear response for proline ranged from 5 µM to 100 µM (r = 0.9968), and the limit of detection was 1.0 µM (S/N = 3). The system was further applied to the measurement of atropine in atropine sulfate injection solutions with the limit of detection 2.3 µM. This new system is a potential tool in pharmaceutical analysis.

Electrochemiluminescence in bioanalysis

The discovery of electrochemiluminescence (ECL) and its development as a means of detection is truly a success story. Although studies describing ECL were published in the early 1960s, most studies using ECL as a means of detection were not widely published until the mid 1990s. Incorporating ECL into assays provides increased sensitivity, several logs of dynamic range and the ability to electronically control the reaction. These characteristics provide advantages over assays that rely on radioisotopic labels, fluorescence and enzymatic activity. There have been many areas of science that have benefited from the use of ECL, including environmental microbiology, virology, neurobiology, molecular biology and immunology. ECL has improved the understanding and treatment of infectious diseases, cancer, neurodegenerative diseases and even sleep apnea disorders. Drug development has also benefited from ECL via improved assessment of pharmacodynamics, pharmacokinetics and determining immune responses against protein-based therapeutics. This review provides an overview of ECL chemistry and principles with a more detailed emphasis on the applications of ECL-based assays in different areas of science and medicine. The primary purpose of this review is to provide an in-depth discussion of the impact that ECL-based analysis has had on microbiology, immunology, virology, neurodegenerative diseases, molecular biology and drug development. Examples of ECL-based bioanalysis in each of these fields are discussed in conjunction with an overview of ECL principles and instrumentation.

Determination of isocyanates by capillary electrophoresis with tris(2,2'-bipyridine)ruthenium(II) electrochemiluminescence

CE with tris(2,2'-bipyridyl) ruthenium(II) (Ru(bpy)(3) (2+)) electrochemiluminescence (ECL) detection for the quantitative determination of isocyanates was first reported. Hexamethylene diisocyanate (HDI) and hexyl isocyanate (HI) were used as the model analytes. Commercially available N,N-diethyl-N'-methylethylenediamine was used as the derivatization reagent. It has both a secondary amine group and a tertiary amine group. The secondary amine group can quantitatively react with isocyanate group, and the tertiary amine group can react with Ru(bpy)(3) (2+) to produce strong ECL signal for sensitive detection. The derivatization reaction was almost instantaneous and is much faster than other reported derivative reactions using other derivative reagents. The urea formed was stable. Linear calibration curve was obtained in the range from 0.01 to 10 microM for HDI, and 0.02 to 20 microM for hexyl isocyanate (HI). The detection limit is 0.01 microM for HDI and 0.02 microM for HI. The method is more sensitive than UV-detection and electrochemical detection. For practical application, recovery higher than 90% for HDI and HI was obtained for foam sample.

Capillary electrophoresis and microchip capillary electrophoresis with electrochemical and electrochemiluminescence detection

Recent advances and key strategies in capillary electrophoresis and microchip CE with electrochemical detection (ECD) and electrochemiluminescence (ECL) detection are reviewed. This article consists of four main parts: CE-ECD; microchip CE-ECD; CE-ECL; and microchip CE-ECL. It is expected that ECD and ECL will become powerful tools for CE microchip systems and will lead to the creation of truly disposable devices. The focus is on papers published in the last two years (from 2005 to 2006).

CE with sequential light-emitting diode-induced fluorescence and electro-chemiluminescence detections for the determination of amino acids and alkaloids

This paper describes the determination of alkaloids and amino acids (AAs) using CE in conjunction with sequential light-emitting diode-induced fluorescence (LEDIF) and electrochemiluminescence (ECL) detections. In the CE-LEDIF-ECL system, the ECL detector was located in the outlet of the capillary, while the LEDIF detector was positioned 12 cm from the outlet. Naphthalene-2,3-dicarboxaldehyde (NDA) was used to form fluorescent AA-NDA derivatives from AAs possessing primary amino groups, while Ru(bpy)(3) (2+) was used to obtain ECL signals for analytes having secondary and tertiary amino groups. In the presence of poly(ethylene oxide), we accomplished the CE-LEDIF-ECL separation of a mixture of 12 AA-NDA derivatives, anabasine, nicotine, and proline within 11 min. This low-cost CE-LEDIF-ECL system allows the analysis of these AA-NDA derivatives and alkaloids at concentrations in the ranges of 49 nM-0.2 microM and 0.66-4.7 microM, respectively. We applied our CE-LEDIF-ECL system to the analysis of a urine sample and also to tobacco extracts. We obtained good qualitative and quantitative results when using this method with these analytes: the RSDs were below 3.0 and 2.8%, respectively. This CE-LEDIF-ECL system provides the advantages of high efficiency, speed, and sensitivity for the analysis of analytes possessing amino groups.

Contemporary sample stacking in CE: A sophisticated tool based on simple principles

Sample stacking is a general term for methods in CE which are used for on-line concentration of diluted analytes. During the stacking process, analytes present at low concentrations in a long injected sample zone are concentrated into a short zone (stack). The stacked analytes are then separated and individual zones are detected. Thus stacking provides better separation efficiency and detection sensitivity. Many papers have been published on stacking till now, various procedures have been described, and, many names have been proposed for stacking procedures utilizing the same principles. This contribution brings an easy and unified view on stacking, describes the basic principles utilized, makes a list of recognized operational principles and brings an overview of principal current procedures. Further, it surveys selected recent practical applications ordered according to their operational principles and includes the terms, nicknames, and acronyms used for these actual stacking procedures. This contribution may help both newcomers and experts in the field of CE to orient themselves in the already quite complex topic of sample stacking.

Analysis of biologically active amines by CE

This paper provides an overview on the current status of the analysis of biogenic amines by CE. The basic CE separation and detection strategies for the analysis of biogenic amines are briefly described. CZE and MEKC that provide highly efficient and reproducible analysis of biogenic amines are particularly surveyed. With respect to the detection of biogenic amines, we focus on LIF, UV-visible absorption, electrochemiluminescence, and MS. Derivatization strategies, indirect methods, and on-line concentration techniques such as field-amplified sample stacking, sweeping, and use of polymer solution are described. To show the practicality of CE, we highlight currently developed techniques for the determinations of biogenic amines in biological samples, including foods, beverages, cerebrospinal fluids, urine, and single cells.

Online concentration and separation of basic proteins using a cationic polyelectrolyte in the presence of reversed electroosmotic flow

We report an online concentration and separation method for basic proteins using poly(diallyldimethylammonium chloride) (PDDA) solutions in the presence of reversed EOF. Using a capillary dynamically coated with 2% PDDA containing 0.1 M NaCl and filled with 1.2% PDDA under neutral conditions (10 mM phosphate, pH 7.0), we have demonstrated the separation of six basic proteins with peak efficiencies ranging from 175 000 to 616 000 plates/m and RSDs of migration time less than 0.4%. Additionally, high-speed separation of six basic proteins (<7 min) was achieved using a short capillary filled with 0.6% PDDA solutions. Under injection of the large-volume sample (210 nL), the LODs at S/N of 3 for basic proteins are down to nanomolar range. For example, the LOD for lysozyme is 1.2 nM, which is a 260-fold sensitivity enhancement compared with conventional injection method. The proposed method has been applied to the stacking of lysozyme in human saliva samples. Without any pretreatment, we also demonstrated the capability of this method to detect low amounts of peptide samples through the stacking of tryptic peptide of myoglobin. The experimental results indicate that our proposed method has great potential for use in clinical diagnosis and proteomics applications.

Simultaneous determination of ethamsylate, tramadol and lidocaine in human urine by capillary electrophoresis with electrochemiluminescence detection

Ethamsylate, tramadol and lidocaine, partly excreted by the kidney, are generally used as hemostatic, analgesic and local anesthetic in surgery. We developed a simple and sensitive method for their simultaneous monitoring in human urine based on CE coupled with electrochemiluminescence detection by end-column mode. Under optimized conditions the proposed method yielded linear ranges from 5.0 x 10(-8) to 5.0 x 10(-5), 1.0 x 10(-7) to 1.0 x 10(-4) and 1.0 x 10(-7) to 1.0 x 10(-4) M with LODs of 8.0 x 10(-9) M (36 amol), 1.6 x 10(-8) M (72 amol) and 1.0 x 10(-8) M (45 amol) (S/N = 3) for ethamsylate, tramadol and lidocaine, respectively. The RSD for their simultaneous detection at 1.0 x 10(-6) M was 2.1, 2.8 and 3.2% (n = 7), respectively. For practical application an extraction step with ethyl acetate at pH 11 was performed to eliminate the influence of the sample ionic strength. The recoveries of ethamsylate, tramadol and lidocaine at different levels in human urine were between 87 and 95%. This method was used for simultaneous detection of ethamsylate, tramadol and lidocaine in clinic urine samples from two medicated patients. It was valuable in clinical and biochemical laboratories for monitoring these drugs for various purposes.

Simultaneous determination of psychotropic drugs in human urine by capillary electrophoresis with electrochemiluminescence detection

Amitriptyline, doxepin and chlorpromazine are often used as psychotropic drugs in treatment of the various mental diseases, and are also partly excreted by kidney. This work developed a simple, selective and sensitive method for their simultaneous monitoring in human urine using capillary electrophoresis coupled with electrochemiluminescence (ECL) detection based on end-column ECL reaction of tris-(2,2'-bipyridyl)ruthenium(II) with aliphatic tertiary amino moieties. Acetone was used as an additive to the running buffer to obtain their absolute separation. Under optimized conditions the proposed method displayed a linear range from 5.0 to 800 ng mL(-1) for the three drugs with the correlation coefficients more than 0.995 (n=8). Their limits of detection were 0.8 ng mL(-1) (3.6 fg), 1.0 ng mL(-1) (4.5 fg) and 1.5 ng mL(-1) (6.8 fg) at a signal to noise ratio of 3, respectively. The relative standard deviations for five determinations of 20 ng mL(-1) amitriptyline, doxepin and chlorpromazine were 1.7%, 4.2% and 3.6%, respectively. For practical application an extract step with 90:10 heptane/ethyl acetate (v/v) was performed to eliminate the influence of ionic strength in sample. The recoveries of amitriptyline, doxepin and chlorpromazine at different levels in human urine were between 83% and 93%, which showed that the method was valuable in clinical and biochemical laboratories for monitoring amitriptyline, doxepin and chlorpromazine.

Determination of aristolochic acid in Chinese herbal medicine by capillary electrophoresis with laser-induced fluorescence detection

We have demonstrated the analysis of aristolochic acids (AAs) that are naturally occurring nephrotoxin and carcinogen by capillary electrophoresis in conjunction with laser-induced fluorescence detection (CE-LIF). Owing to lack of intrinsic fluorescence characteristics of oxidized AAs (OAAs), reduction of the analytes by iron powder in 10.0 mM HCl is required prior to CE analysis. The reduced AAs (RAAs) exhibit fluorescence at 477 nm when excited at 405 nm using a solid-state blue laser. By using 50.0 mM sodium tetraborate (pH 9.0) containing 10.0 mM SDS, the determination of AA-I and AA-II by CE-LIF has been achieved within 12 min. The CE-LIF provides the LODs of 8.2 and 5.4 nM for AA-I and AA-II, respectively. The simple CE-LIF method has been validated by the analysis of 61 Chinese herbal samples. Prior to CE analysis, OAAs were extracted by using 5.0 mL MeOH, and then the extracts were subjected to centrifugation at 3,000 rpm for 5 min. After reduction, extraction, and centrifugation, the supernatants were collected and subjected to CE analysis. Of the 61 samples, 14 samples contain AA-I and AA-II, as well as 10 samples contain either AAI or AAII. The relative standard deviation (RSD) values of the migration times for AA-I and AA-II are less than 2.5% and 2.1% for three consecutive measurements of each sample. The RSD values for the peak heights corresponding to AA-I and AA-II in most samples are about 8.0% and 10.0%, respectively. The result shows that the present CE-LIF approach is sensitive, simple, efficient, and accurate for the determination of AAs in real samples.