Mass distribution and focusing properties of carrier ampholytes for isoelectric focusing: I. Novel and unexpected results

Strategies for capillary electrophoresis: Method development and validation for pharmaceutical and biological applications-Updated and completely revised edition

This review is in support of the development of selective, precise, fast, and validated capillary electrophoresis (CE) methods. It follows up a similar article from 1998, Wätzig H, Degenhardt M, Kunkel A. "Strategies for capillary electrophoresis: method development and validation for pharmaceutical and biological applications," pointing out which fundamentals are still valid and at the same time showing the enormous achievements in the last 25 years. The structures of both reviews are widely similar, in order to facilitate their simultaneous use. Focusing on pharmaceutical and biological applications, the successful use of CE is now demonstrated by more than 600 carefully selected references. Many of those are recent reviews; therefore, a significant overview about the field is provided. There are extra sections about sample pretreatment related to CE and microchip CE, and a completely revised section about method development for protein analytes and biomolecules in general. The general strategies for method development are summed up with regard to selectivity, efficiency, precision, analysis time, limit of detection, sample pretreatment requirements, and validation.

Pros and cons of peptide isolectric focusing in shotgun proteomics

In shotgun proteomics, protein mixtures are proteolytically digested before tandem mass spectrometry (MS/MS) analysis. Biological samples are generally characterized by a very high complexity, therefore a step of peptides fractionation before the MS analysis is essential. This passage reduces the sample complexity and increases its compatibility with the sampling performance of the instrument. Among all the existing approaches for peptide fractionation, isoelectric focusing has several peculiarities that are theoretically known but practically rarely exploited by the proteomics community. The main aim of this review is to draw the readers' attention to these unique qualities, which are not accessible with other common approaches, and that represent important tools to increase confidence in the identification of proteins and some post-translational modifications. The general characteristics of different methods to perform peptide isoelectric focusing with natural and artificial pH gradients, the existing instrumentation, and the informatics tools available for isoelectric point calculation are also critically described. Finally, we give some general conclusions on this strategy, underlying its principal limitations.

Isoelectric focusing in a drop

A novel approach to molecular separations is investigated using a technique termed droplet-based isoelectric focusing. Drops are manipulated discretely on a superhydrophobic surface, subjected to low voltages for isoelectric focusing, and split-resulting in a preparative separation. A universal indicator dye demonstrates the generation of stable, reversible pH gradients (3-10) in ampholyte buffers, and these gradients lead to protein focusing within the drop length. Focusing was visually characterized, spectroscopically verified, and assessed quantitatively by noninvasive light scattering measurements. It was found to correlate with a quantitative model based on 1D steady-state theory. This work illustrates that molecular separations can be deployed within a single open drop, and the differential fractions can be separated into new discrete liquid elements.

Isoelectric focusing of small non-covalent metal species from plants

IEF is known as a powerful electrophoretic separation technique for amphoteric molecules, in particular for proteins. The objective of the present work is to prove the suitability of IEF also for the separation of small, non-covalent metal species. Investigations are performed with copper-glutathione complexes, with the synthetic ligand ethylenediamine-N,N'-bis(o-hydroxyphenyl)acetic acid (EDDHA) and respective metal complexes (Fe, Ga, Al, Ni, Zn), and with the phytosiderophore 2'-deoxymugineic acid (DMA) and its ferric complex. It is shown that ethylenediamine-N,N'-bis(o-hydroxyphenyl)acetic acid and DMA species are stable during preparative scale IEF, whereas copper-glutathione dissociates considerably. It is also shown that preparative scale IEF can be applied successfully to isolate ferric DMA from real plant samples, and that multidimensional separations are possible by combining preparative scale IEF with subsequent HPLC-MS analysis. Focusing of free ligands and respective metal complexes with di- and trivalent metals results in different pIs, but CIEF is usually needed for a reliable estimation of pI values. Limitations of the proposed methods (preparative IEF and CIEF) and consequences of the results with respect to metal speciation in plants are discussed.

Femtomolar concentration detection limit and zeptomole mass detection limit for protein separation by capillary isoelectric focusing and laser-induced fluorescence detection

Fluorescence tends to produce the lowest detection limits for most forms of capillary electrophoresis. Two issues have discouraged its use in capillary isoelectric focusing. The first issue is fluorescent labeling of proteins. Most labeling reagents react with lysine residues and convert the cationic residue to a neutral or anionic product. At best, these reagents perturb the isoelectric point of the protein. At worse, they convert each protein into hundreds of different fluorescent products that confound analysis. The second issue is the large background signal generated by impurities within commercial ampholytes. This background signal is particularly strong when excited in the blue portion of the spectrum, which is required by many common fluorescent labeling reagents. This paper addresses these issues. For labeling, we employ Chromeo P540, which is a fluorogenic reagent that converts cationic lysine residues to cationic fluorescent products. The reaction products are excited in the green, which reduces the background signal generated by impurities present within the ampholytes. To further reduce the background signal, we photobleach ampholytes with high-power photodiodes. Photobleaching reduced the noise in the ampholyte blank by an order of magnitude. Isoelectric focusing performed with photobleached pH 3-10 ampholytes produced concentration detection limits of 270 +/- 25 fM and mass detection limits of 150 +/- 15 zmol for Chromeo P540 labeled beta-lactoglobulin. Concentration detection limits were 520 +/- 40 fM and mass detection limits were 310 +/- 30 zmol with pH 4-8 ampholytes. A homogenate was prepared from a Barrett's esophagus cell line and separated by capillary isoelectric focusing, reproducibly generating dozens of peaks. The sample taken for the separation was equal to the labeled protein homogenate from three cells.

Third generation of focusing: gel matrices with immobilized cation gradients

A novel method is reviewed here for separation of polyanions, based not on conventional zone electrophoretic means, but on a "steady-state" process by which said polyanions are driven to stationary zones along the migration path against a gradient of positive charges affixed to the neutral polyacrylamide matrix. As the total negative surface charge of such polyanions matches the surrounding charge density of the matrix, they stop migrating and remain stationary, as typical of steady-state separation techniques. This technique has been successfully applied to SDS-protein micelles, DNAs, RNAs and heparins, with remarkable separations, often much superior than those obtained in conventional techniques. Additionally, by exploiting constant plateaus of charges, rather than gradients, it is possible to amplify the separation between species having closely spaced charge densities. This technique resembles a classical IEF process, with the proviso that the polyanions cannot be applied at any position along the gel matrix, but only at the point of low (or zero) charge density. The merits and limits of the technique are assessed.

Mass distribution, polydispersity, and focusing properties of carrier ampholytes for IEF. Part V: pH 9-11 interval

As a last part of an investigation on all 2-pH-unit intervals of carrier ampholytes (CAs) for IEF (see Electrophoresis 2006, 27, 3919-3934; 2006, 27, 4849-4858; 2007, 28, 715-723) two different lots of Servalyt CAs, in the pH 9-11 range, have been analyzed by a 2-D technique based on preparative Rotofor fractionation followed by capillary electrophoresis mass-spectrometry of 10 out of 20 fractions harvested, in the second dimension. The findings: the two lots contain 65 and 69 different M(r) compounds, in the M(r) interval of 232-667 Da, for a total of 341-387 isoforms, respectively. Since this is a chaotic organic synthesis, the high reproducibility (here demonstrated for the first time during the 40 years of existence of CAs) of the synthetic process (for two batches produced at 6 years of distance) is remarkable, considering that a 94% agreement for the individual chemicals and 88% agreement for the total number of isoforms for the two lots is found. It is additionally demonstrated that the lower pI species are accompanied by considerably more isoforms than the high pI forms and that in all cases such isoforms consist of family of compounds clustered around the pI of the parental form, with a pI spread of ca. 0.1-0.2 pH units.

Profiling recombinant major birch pollen allergen Bet v 1a and carbamylated variants with CZE and CIEF

A preparation of recombinant birch pollen allergen of Betula verrucosa isoform 1a (Bet v 1a) containing chemically modified (carbamylated) variants has been analyzed by CZE and CIEF. In CZE, employing a 100 mmol/L MES buffer at pH 6.50, with 0.4 mmol/L tetraethylenepentamine (TEPA) added, allowed for the resolution of 17 protein fractions. The CIEF profiling of the allergen preparation required a combination of a wide-pH-range carrier ampholyte (CA) of pH 3-10 with two narrow-range CAs of pH 5-6 and 5-7. For CIEF, 91 mmol/L of glycine at pH 2.12 and 20 mmol/L of CHES at pH 10.00 were applied as anolyte and catholyte, respectively. The generated pH gradient was nonlinear with a flat slope for pH 4-6, thus providing an improved resolution. In CIEF, up to 18 protein fractions were distinguished as well. The pI of the target allergen Bet v 1a was 4.9 as determined by means of two pI marker compounds flanking the allergen. Relative purity of the target allergen within the preparation containing carbamylated variants was in accordance for both separation systems and varied between 40.7 and 42.8%.

Gel-free IEF in a membrane-sealed multicompartment cell for proteome prefractionation

A minidevice for performing gel-free proteome prefractionation via conventional IEF in soluble carrier ampholyte buffers is reported here. It consists of a compact block of polyoxymethylene in which eight samples and two electrode chambers are machined. Each of the eight sample chambers can be filled with up to 120 microL of sample and has the following size: 7 mm width, 3 mm depth and 10 mm height. The anodic and cathodic compartments have the same width and height as the sample chambers, but with a depth of 6 mm, thus accepting up to 250 microL of electrodic solutions. Focusing is in general accomplished in 2 h with a voltage gradient of up to 1000 V (7 cm electrode distance). Easy fractionation and collection of the content of the eight chambers is achieved by simply pressing a rubber diaphragm against the edges of the thin walls separating each well, this automatically breaking liquid continuity. The performance of this device has been tested by subfractionating total cell lysates of a human cancer cell line (U2Os) and of Escherichia coli bacterial cells, and by analysing the content of each chamber by mono-dimensional SDS-PAGE and 2-D maps.

Trends in sample preparation for classical and second generation proteomics

Sample preparation is a fundamental step in the proteomics workflow. However, it is not easy to find compiled information updating this subject. In this paper, the strategies and protocols for protein extraction and identification, following either classical or second generation proteomics methodologies, are reviewed. Procedures for: tissue disruption, cell lysis, sample pre-fractionation, protein separation by 2-DE, protein digestion, mass spectrometry analysis, multidimensional peptide separations and quantification of protein expression level are described.

Mass distribution, polydispersity and focusing properties of carrier ampholytes for IEF. IV: pH 6–8 intervals

Four commercial brands of carrier ampholytes (Ampholine, Pharmalyte, Servalyt, Bio-Lyte), in the pH 6-8 range, have been analyzed by a 2-D technique based on preparative Rotofor fractionation followed by CE-MS of 10 out of 20 fractions harvested, in the second dimension. The findings: Ampholine (pH 6-8) contains 80 different M(r) compounds, in the M(r) interval 216-979 Da, for a total of 326 isoforms. Bio-Lyte (pH 6-8) consists of 62 different M(r) species, in the M(r) range 341-1048 Da, for a total of 237 isoforms. Servalyt (pH 6-8) is made of 126 different M(r) compounds, in the M(r) interval 240-785 Da, for a total of 703 isoforms. Pharmalyte (pH 5-8) comprises 123 amphoteres, in the M(r) range of 221-992 Da, for a total of 476 isoforms. Pharmalyte appears to be the best brand, with a good proportion of species focusing sharply at their pI position and relatively few 'poor' species, distributed along the entire pH gradient. General conclusions are drawn on the properties of all the pH intervals explored in this series of investigations and some guidelines for possible synthetic routes ameliorating the neutral and alkaline pH intervals are discussed.

Mass distribution, polydispersity and focusing properties of carrier ampholytes for IEF. III: pH 2.5–4 intervals

To study the molecular mass distribution and number of species in narrow-range (2-pH-unit wide, in the nominal pI 2-4 or 3-5 interval) carrier ampholytes from four commercial sources (Bio-Lyte, Servalyt, Ampholine and Pharmalyte), a 2-D technique was adopted, consisting of a preparative focusing step in a Rotofor instrument, followed by analysis of every other collected fraction (10 out of 20) by CE-MS. It was found that Ampholine pH 3.5-5 contains 105 different molecular mass (M(r)) compounds, in the M(r) interval 205-965 Da, for a total of 446 isoforms. Bio-Lyte pH 3-5 consists of 84 different M(r) species, in the M(r) range 216-965 Da, for a total of 383 isoforms. Servalyt pH 2-4 is made of 227 different M(r) compounds, in the M(r) interval 204-929 Da, for a total of 1201 isoforms. Pharmalyte pH 2.5-5 comprises 245 amphoteres, in the M(r) range 203-857 Da, for a total of 857 isoforms. Pharmalyte appears to be the best brand, with the vast majority of species focusing sharply at their pI position and almost no 'poor' species, distributed along the entire pH gradient, denoting an extremely shallow pH/mobility curve across the pI value. Due to some overlap with the adjacent acidic pH 4-6 interval, the species in common have been evaluated: the most extended overlaps are found in Ampholine (55% of the species appearing in the two neighbouring intervals) and in Servalyt (47% coincidence). The lowest overlaps are found in Pharmalyte (23%) and in Bio-Lyte (20%).

Mass distribution, polydispersity and focusing properties of carrier ampholytes for IEF II: pH 4–6 intervals

For studying the M(r) distribution and number of species in narrow-range (2 pH-unit wide, in the nominal pI 4-6 interval) carrier ampholytes from four commercial sources (Bio-Lyte, Servalyt, Ampholine and Pharmalyte), a 2-D technique was adopted consisting of a focusing step in a liquid phase (Rotofor, yielding 20 fractions) followed by orthogonal CE in both, acidic and basic buffers. As a final step, every other fraction was analyzed by CE-MS. The findings: Ampholine contains 80 different M(r) compounds, in the M(r) interval 203 to 893 Da, for a total of 325 isoforms. Bio-Lyte consists of 66 different M(r) species, in the M(r) range 388 to 835 Da, for a total of 436 isoforms. Servalyt is made of 199 different M(r) compounds, in the M(r) interval 204 to 907 Da, for a total of 1302 isoforms. Pharmalyte pH 4-6.5, comprises 217 amphoteres, in the M(r) range 150 to 1179 Da, for a total of 812 isoforms. Pharmalyte appears to be the best brand, with the vast majority of species focusing sharply at their pI position and <5% "poor" species, distributed along the entire pH gradient, denoting an extremely shallow pH/mobility curve across the pI value.