Pump-free and low-cost negative pressure sampling device for rapid sample loading in MCE

Rapid determination of catecholamines in urine samples by nonaqueous microchip electrophoresis with LIF detection

Nonaqueous microchip electrophoresis (NAMCE), which makes use of an organic medium instead of a conventional aqueous buffer solution, is a promising separation method for analytical chemistry due to the enhanced solubility of hydrophobic analytes and tailored selectivity of separation. Here, we describe an NAMCE with LIF detection combined with a pump-free negative pressure sampling device for rapid determination of catecholamines (CAs) in urine samples, and the whole analysis time (including sampling time and separation time) was less than 1 min.

Rapid determination of catecholamines in urine samples by nonaqueous microchip electrophoresis with LIF detection

A method was developed for the rapid separation of catecholamines by nonaqueous microchip electrophoresis (NAMCE) with LIF detection, A homemade pump-free negative pressure sampling device was used for rapid bias-free sampling in NAMCE, the injection time was 0.5 s and the electrophoresis separation conditions were optimized. Under the optimized conditions, the samples were separated completely in <1 min. The average migration times of the epinephrine (E), dopamine (DA), and norepinephrine (NE) were 34.26, 43.81, and 50.07 s, with an RSD of 1.05, 1.26, and 0.89% (n = 7), respectively. The linearity of the method ranged from 0.0125 to 2.0 mg/L for E and 0.025~4.0 mg/L for DA and NE, with correlation coefficients ranging between 0.9978 and 0.9986. The detection limits of E, DA, and NE were 2.5, 5.0, and 5.0 μg/L, respectively. The recoveries of E, DA, and NE in spiked urine samples were between 86 and 103%, with RSDs of 4.5~6.8% (n = 5). The proposed NAMCE with LIF detection combined with a pump-free negative pressure sampling device is a simple, inexpensive, energy efficient, miniaturized system that can be successfully applied for the determination of catecholamines in urine samples.

Instrumentation design for hydrodynamic sample injection in microchip electrophoresis: a review

Reproducible and representative sample injection in microchip electrophoresis has been a bottleneck for quantitative analytical applications. Electrokinetic sample injection is the most used because it is easy to perform. However, this injection method is usually affected by sample composition and the bias effect. On the other hand, these drawbacks are overcome by the hydrodynamic (HD) sample injection, although this injection mode requires HD flow control. This review gives an overview of the basic principles, the instrumentation designs, and the performance of HD sample injection systems for microchip electrophoresis.