Selective enrichment of catecholamines using iron oxide nanoparticles followed by CE with UV detection

Ultrasensitive analysis of mirtazapine and its metabolites enantiomers in body fluids using ultrasound-enhanced and surfactant-assisted dispersive liquid-liquid microextraction followed by polymer-mediated stacking in capillary electrophoresis

A simple, rapid, and sensitive technique for measuring mirtazapine and its metabolites enantiomers in human fluids, such as urine and serum, was developed by applying ultrasound-enhanced and surfactant-assisted dispersive liquid-liquid microextraction (USA-DLLME) integrated with poly(diallyldimethylammonium chloride) (PDDAC)-mediated stacking in capillary electrophoresis (CE). The parameters that affect extraction and stacking performance, such as the extraction volume, surfactant types, surfactant concentrations, salt additives, extraction time, solution pH, and background electrolytes, were comprehensively studied and optimized to achieve optimal detection performance. Under optimal extraction conditions (injection of 120 µL of C₂H₂Cl₄ into 1 mL of a sample solution containing 0.05 mM Brij-35 at pH 10.0) and separation conditions (0.9% PDDAC, 10 mM phosphate, pH 3.0, and 20 mM dimethyl-β-cyclodextrin), on-line CE stacking of mirtazapine-related chiral drugs was achieved by the two strategies: (i) neutral DM-β-CD sweep low concentrations of DL-NaSSA and (ii) DL-NASSA is stacked by the difference in the viscosity between the PDDAC and sample zone. An approximately 2,800-4000-fold improvement in detection sensitivity was revealed for mirtazapine, N-demethylmirtazapine, and 8-hydroxymirtazapine enantiomers. The linear ranges for the quantification of all analyte enantiomers were 1.2-150 nM, with a coefficient of determination higher than 0.99; the relative standard deviations in the migration time and peak areas for six analytes were less than 1.8% and 5.8%, respectively. The proposed system provided the limits of detection (signal-to-noise ratio of 3) of the six analytes as 0.3-0.5 nM. The recovery of the six separated analytes spiked in urine and serum samples was revealed to be 82.7%-109.5% and 91%-112.8%, respectively. This advanced technique with high sensitivity enhancement factors was successfully employed to analyze mirtazapine and its metabolites enantiomers in urine and serum samples with reliability.

Current Sample Preparation Methodologies for Determination of Catecholamines and Their Metabolites

Catecholamines (CAs) and their metabolites play significant roles in many physiological processes. Changes in CAs concentration in vivo can serve as potential indicators for the diagnosis of several diseases such as pheochromocytoma and paraganglioma. Thus, the accurate quantification of CAs and their metabolites in biological samples is quite important and has attracted great research interest. However, due to their extremely low concentrations and numerous co-existing biological interferences, direct analysis of these endogenous compounds often suffers from severe difficulties. Employing suitable sample preparation techniques before instrument detection to enrich the target analytes and remove the interferences is a practicable and straightforward approach. To date, many sample preparation techniques such as solid-phase extraction (SPE), and liquid-liquid extraction (LLE) have been utilized to extract CAs and their metabolites from various biological samples. More recently, several modern techniques such as solid-phase microextraction (SPME), liquid-liquid microextraction (LLME), dispersive solid-phase extraction (DSPE), and chemical derivatizations have also been used with certain advanced features of automation and miniaturization. There are no review articles with the emphasis on sample preparations for the determination of catecholamine neurotransmitters in biological samples. Thus, this review aims to summarize recent progress and advances from 2015 to 2021, with emphasis on the sample preparation techniques combined with separation-based detection methods such capillary electrophoresis (CE) or liquid chromatography (LC) with various detectors. The current review manuscript would be helpful for the researchers with their research interests in diagnostic analysis and biological systems to choose suitable sample pretreatment and detection methods.

Zirconium-doped magnetic microspheres for the selective enrichment of cis-diol-containing ribonucleosides

Zirconium-doped magnetic microspheres (Zr-Fe3O4) for the selective enrichment of cis-diol-containing biomolecules were easily synthesized via a one-step hydrothermal method. Characterization of the microspheres revealed that zirconium was successfully doped into the lattice of Fe3O4 at a doping level of 4.0 at%. Zr-Fe3O4 possessed good magnetic properties and high specificity towards cis-diol molecules, as shown using 28 compounds. For ribonucleosides, the adsorbent not only has favorable anti-interferential abilities but also has a high adsorption capacity up to 159.4μmol/g. As an example of a real application, four ribonucleosides in urine were efficiently enriched and detected via magnetic solid-phase extraction coupled with high-performance liquid chromatography. Under the optimized extraction conditions, the detection limits were determined to be between 0.005 and 0.017μg/mL, and the linearities ranged from 0.02 to 5.00μg/mL (R≥0.996) for these analytes. The accuracy of the analytical method was examined by studying the relative recoveries of the analytes in real urine samples, with recoveries varying from 77.8% to 119.6% (RSDs<10.6%, n=6). The results indicate that Zr-Fe3O4 is a suitable adsorbent for the analysis of cis-diol-containing biomolecules in practical applications.

Advance of CE and CEC in phytochemical analysis (2012–2013)

This article presents an overview of the advance of CE and CEC in phytochemical analysis, based on the literature not mentioned in our previous review papers [Chen, X. J., Zhao, J., Wang, Y. T., Huang, L. Q., Li, S. P., Electrophoresis 2012, 33, 168–179], mainly covering the years 2012–2013. In this article, attention is paid to online preconcentration, rapid separation, and sensitive detection. Selected examples illustrate the applicability of CE and CEC in biomedical, pharmaceutical, environmental, and food analysis. Finally, some general conclusions and future perspectives are given.

Prototyping of poly(dimethylsiloxane) interfaces for flow gating, reagent mixing, and tubing connection in capillary electrophoresis

Integrated microfluidic systems coupled with electrophoretic separations have broad application in biologic and chemical analysis. Interfaces for the connection of various functional parts play a major role in the performance of a system. Here, we developed a rapid prototyping method to fabricate monolithic poly(dimethylsiloxane) (PDMS) interfaces for flow-gated injection, online reagent mixing, and tube-to-tube connection in an integrated capillary electrophoresis (CE) system. The basic idea was based on the properties of PDMS: elasticity, transparency, and suitability for prototyping. The molds for these interfaces were prepared by using commercially available stainless steel wires and nylon lines or silica capillaries. A steel wire was inserted through the diameter of a nylon line and a cross format was obtained as the mold for PDMS casting of flow gates and 4-way mixers. These interfaces accommodated tubing connection through PDMS elasticity and provided easy visual trouble shooting. The flow gate used smaller channel diameters, thus reducing flow rate by 25-fold for effective gating compared with mechanically machined counterparts. Both PDMS mixers and the tube-to-tube connectors could minimize the sample dead volume by using an appropriate capillary configuration. As a whole, the prototyped PDMS interfaces are reusable, inexpensive, convenient for connection, and robust when integrated with the CE detection system. Therefore, these interfaces could see potential applications in CE and CE-coupled systems.