Very fast electrophoretic separation on commercial instruments using a combination of two capillaries with different internal diameters

Characterization of linearly coupled capillaries with various inner diameters in the context of capillary electrophoresis

As a result of continuous instrumental progress, capillary electrophoresis has become an established separation technique. However, the choice of the suitable capillary inner diameter is sometimes difficult due to different instrumental requirements concerning injection, separation, or detection. To overcome this problem, we assembled two capillaries with different inner diameters, meaning that the inner diameter of the capillary at the injection side was different from that at the detection side. Since this was a rather uncommon approach, we focused on the associated effects in this proof-of-concept study. For the experiments, a non-aqueous model system was used, consisting of an acetonitrile-based background electrolyte and the two ferrocene derivates, ferrocenemethanol and decamethylferrocene. Using capillary flow injection analysis hyphenated to capacitively coupled contactless conductivity detection, it could be shown that fragmented capillaries of the same inner diameter had slightly lower volume flow rates than non-fragmented capillaries. With non-aqueous capillary electrophoresis hyphenated to UV detection, it was found that the coupling of capillaries with different inner diameter had a much stronger effect on the capillary electrophoresis flow than combinations with the same inner diameter. Additionally, if the inner diameter of the second capillary was larger than the inner diameter of the first capillary, a higher theoretical plate number and an increased sensitivity were found. Furthermore, it was found that there was no significant peak tailing introduced by the coupling.

Graphic abstract

Polyimide removal, cleaving, and fusion splicing of cylindrical and square fused silica capillaries for new separation and detection layouts in capillary electrophoresis and chromatography

Fusion splicing is an already mature technology used to join the ends of optical fibers in the telecommunication industry. However, there is a lack of reliable and well-described protocols to join the ends of fused silica microtubes or capillaries using fusion splicing. In this work, a step-by-step procedure is proposed and demonstrated to find the optimal operation conditions to splice the ends of fused silica capillaries by fusion. The two most appropriate and known technologies were tested and optimized: the microfurnace technique (or hot filament technique) and the electric arc technique. It is shown that both produce good splices when the capillaries are well cleaved. For this reason, the removal of the external coating, which is important for good cleavage, was also revised. The cleaving techniques were also compared among themselves. As a result, fusion splices of cylindric-to-cylindric, cylindric-to-square, and square-to-square capillaries are demonstrated. They have potential applications in new detection schemes and separation layouts in capillary electrophoresis, electrophoresis-based hydrodynamic concentrators, chromatography, cell sorters, and microfluidics in general.

Frequency-tuned contactless conductivity detector for the electrophoretic separation of clinical samples in capillaries with very small internal dimensions

An axial design of a capacitively coupled contactless conductivity detector was tested in combination with fused-silica capillaries with internal diameters of 10, 15, and 25 μm, which are used for high-efficiency electrophoretic separation. The transmission of the signal in the detection probe dependent on the specific conductivity of the solution in the capillary in the range 0-278 mS.m^-1 has a complex character and a minimum appears on the curve at very low conductivities. The position of the minimum of the calibration dependence gradually shifts with decreasing frequency of the exciting signal from 1.0 to 0.25 MHz toward lower specific conductivity values. The presence of a minimum on the calibration curves is a natural property of the axial design of contactless conductivity detector, demonstrated by solution of the equivalent electrical circuit of the detection probe, and is specifically caused by the use of shielding foil. The behavior of contactless conductivity detector in the vicinity of the minimum was documented for practical separations of amino acids in solutions of 3.2 M acetic acid with addition of 0-50% v/v methanol.