A fluorous porous polymer monolith photo-patterned chromatographic column for the separation of a flourous/fluorescently labeled peptide within a microchip

Electric Field-Driven On-Request Instant in Situ Formation/Removal of Solid Hydrogel within Microchannels for Efficient Electrophoretic Separation

Electrophoretic separation in short microchannels is a promising way for rapid analysis of biomolecules, but the pressurized laminar flow may compromise the separation efficiency. In this work, through an electric field, instant formation and removal of a solid chitosan/β-glycerol phosphate (CS/β-GP) hydrogel within microchannels of microchips were realized. In a typical cross-type microchip, the CS/β-GP hydrogel was precisely formed in the separation microchannel within 15 s of the application of a voltage of 2000 V. Highly efficient separation of peptides and proteins was achieved, and theoretical plate numbers of 0.6 to 1.5 × 10⁶/m were attained for proteins in 120 s. The used hydrogel could be swiftly removed also with an electric field, and the whole procedure was achieved on a standard microchip electrophoresis device with no extra accessory or special operation required.

Immune-affinity monolithic array with chemiluminescent detection for mycotoxins in barley

BACKGROUND

Mycotoxins are produced by fungi as secondary metabolites. They often multi-contaminate food and feed commodities posing a health risk to humans and animals. Fast and easy multiplex screening could be thought as a useful tool for detection of multi-contaminated food and feed commodities.

RESULTS

A highly sensitive immune-affinity monolithic arrays for detecting the mycotoxins zearalenone, deoxynivalenol, T-2 toxin, HT-2 toxin, aflatoxins, ochratoxin A, and fumonisin B₁ were fabricated using UV induced co-polymerisation. The mycotoxin antibodies firstly reacted with functional monomer to form antibody/functional monomer bio-conjugates. Subsequently, the antibody/functional monomer bio-conjugates co-polymerised with cross-linker to form mycotoxins immune-affinity arrays. With optimal fabrication conditions, all mycotoxin immune-affinity monolithic arrays exhibited a linear response spanning three orders of magnitude. And the immune-affinity monolithic array has a low detection limit and has a good uniformity (intra-assay CV, and inter-assay CV both <8%).

CONCLUSION

The fabricated mycotoxin immune-affinity monolithic arrays were proved as a sensitive, stable and economical tool in real food samples detection. Moreover, the mycotoxin immune-affinity monolithic arrays would be able to minimise manipulation steps: add samples and enzyme labelled mycotoxins, and detect CL signals. © 2016 Society of Chemical Industry.

Analysis of proteins and peptides by electromigration methods in microchips

This review presents the developments and applications of microchip electromigration methods in the separation and analysis of peptides and proteins in the period 2011-mid-2016. The developments in sample preparation and preconcentration, microchannel material, and surface treatment are described. Separations by various microchip electromigration methods (zone electrophoresis in free and sieving media, affinity electrophoresis, isotachophoresis, isoelectric focusing, electrokinetic chromatography, and electrochromatography) are demonstrated. Advances in detection methods are reported and novel applications in the areas of proteomics and peptidomics, quality control of peptide and protein pharmaceuticals, analysis of proteins and peptides in biomatrices, and determination of physicochemical parameters are shown.

Advances in monoliths and related porous materials for microfluidics

In recent years, the use of monolithic porous polymers has seen significant growth. These materials present a highly useful support for various analytical and biochemical applications. Since their introduction, various approaches have been introduced to produce monoliths in a broad range of materials. Simple preparation has enabled their easy implementation in microchannels, extending the range of applications where microfluidics can be successfully utilized. This review summarizes progress regarding monoliths and related porous materials in the field of microfluidics between 2010 and 2015. Recent developments in monolith preparation, solid-phase extraction, separations, and catalysis are critically discussed. Finally, a brief overview of the use of these porous materials for analysis of subcellular and larger structures is given.

Electrodeposition of reduced graphene oxide on a Pt electrode and its use as amperometric sensor in microchip electrophoresis

This report describes the development and application of a novel graphene-modified electrode to be used as amperometric sensor in microchip electrophoresis (ME) devices. The modified electrode was achieved based on electroreduction of graphene oxide on an integrated Pt working electrode of a commercial ME device. The surface modification was characterized by SEM and cyclic voltammetry techniques. The results indicated that graphene sheets were successfully deposited exhibiting higher surface conductivity and greater electrode sensitivity. The performance of the modified electrode for the amperometric detection on ME devices has been demonstrated by the separation and detection of an anionic mixture containing iodide and ascorbate. The graphene-modified electrode provided significantly higher sensitivity (896.7 vs. 210.9 pA/μM for iodide and 217.8 vs. 127.8 pA/μM for ascorbate), better separation efficiencies (3400 vs. 700 plates/m for iodide and 10 000 vs. 2400 plates/m for ascorbate), enhanced peak resolutions (1.6 vs. 1.0), and LODs (1.5 vs. 5.3 μM for iodide and 3.1 vs. 7.3 μM for ascorbate) in comparison with the unmodified Pt electrode. The proposed amperometric sensor was successfully applied for the analysis of ascorbic acid (through its anionic form) in a commercial medicine sample, and the results achieved were in agreement with the value provided by the supplier. Based on the data here presented, the modified graphene electrode shows great promise for ME applications.

Separation of natural antioxidants using PDMS electrophoresis microchips coupled with amperometric detection and reverse polarity

This report describes the use of PDMS ME coupled with amperometric detection for rapid separation of ascorbic, gallic , ferulic, p-coumaric acids using reverse polarity. ME devices were fabricated in PDMS by soft lithography and detection was accomplished using an integrated carbon fiber working electrode aligned in the end-channel configuration. Separation and detection parameters were investigated and the best conditions were obtained using a run buffer consisting of 5 mM phosphate buffer (pH 6.9) and a detection voltage of 1.0 V versus Ag/AgCl reference electrode. All compounds were separated within 70 s using gated injection mode with baseline resolution and separation efficiencies between 1200 and 9000 plates. Calibration curves exhibited good linearity and the LODs achieved ranged from 1.7 to 9.7 μM. The precision for migration time and peak height provided maximum values of 4% for the intrachip studies. Lastly, the analytical method was successfully applied for the analysis of ascorbic and gallic acids in commercial beverage samples. The results achieved using ME coupled with amperometric detection were in good agreement with the values provided by the supplier. Based on the data reported here, the proposed method shows suitability to be applied for the routine analysis of beverage samples.