The preparation of a fluorescent dual-modality nanosensor for the discrimination and determination of biothiols in real samples and its practical detection kit

Biothiols widely exist in living organisms and have a crucial function of maintaining redox balance in the human body. It is vital yet difficult to develop probes that can simultaneously detect and distinguish biothiols. In this study, a highly sensitive dual-modality nanosensor, NBD-Nap@NCC, was developed for the discrimination and determination of biothiols in real samples, and its practical application was elucidated based on RGB analysis using a smartphone. The sensitive nanosensor was successfully prepared through the surface modification of nanocrystalline cellulose (NCC), combining NBD and naphthalene fluorophores. Owing to the high electron-withdrawing behavior of the NBD group, which led to a PET mechanism between the fluorophores, the prepared NBD-Nap@NCC nanosensor had a very weak fluorescence response. However, after treatment with Hcy or Cys, NBD-Nap@NCC quickly provided remarkable and different rates of fluorescence "turn-on" responses in both blue and green channels, which was attributed to naphthalene and NBD fluorophores as a result of the inhibition of the PET mechanism. However, after treatment with GSH, only a significant blue-channel emission, which was attributed to the naphthalene fluorophore was obtained, indicating the inhibition of the PET mechanism. Furthermore, the NCC platform demonstrated improved sensitivity and selectivity because of the increased surface area and higher number of binding sites due to modification of the NBD group on the surface. The detection limit ranged from 0.910 to 1.150 μmol L-1 for biothiols with a large dynamic response range. The accuracy of the sensor in determining the concentrations of Hcy, Cys, and GSH in real samples was evaluated via HPLC and spike/recovery analysis. Additionally, paper-based analysis kits were fabricated for the practical detection of biothiols based on RGB changes using a smartphone application.

An efficient chemiluminescent probe based on Ni-doped CsPbBr3 perovskite nanocrystals embedded in mesoporous SiO2 for sensitive assay of L-cysteine

This study presents an efficient chemiluminescence (CL) probe based on perovskite nanocrystals (NCs) for detection of L-cysteine (L-Cys). It consists of nickel-doped CsPbBr3 NCs embedded in the mesoporous SiO2 matrix as CL reagent and cerium (IV) as an oxidant in aqueous environment. The probe was designed for the highly selective determination of L-Cys based on its remarkable enhancing effect on the CL intensity. The colloidal nanocomposite of nickel-doped CsPbBr3 NCs@SiO2 with photoluminescence quantum yield of 58% was fabricated by ligand-assisted re-precipitation method and characterized by using UV-Vis absorption, FT-IR, X-ray diffraction, and transmission electron microscopy. The sensor was utilized to determine L-Cys in the linear concentration range of 20-300 nM with a detection limit of 12.8 nM. Direct chemical oxidation of Ni-doped CsPbBr3 NCs@SiO2 by Ce(IV) was the single cause of the formation of the excited-state NCs and subsequent production of CL. The developed probe provides outstanding selectivity towards L-Cys over structurally related compounds. Accurate determination of L-Cys in human serum samples was achieved without interference, and the results were confirmed by HPLC method.

Simultaneous determination of cystine and other free aminothiols in blood plasma using capillary electrophoresis with pH-mediated stacking

We developed a method of sensitive capillary electrophoresis using UV detection for the determination of certain free aminothiols (reduced cysteinylglycine (rCysGly), cysteine (rCys), glutathione (rGln), and cystine (CysS) in human blood plasma. The reduced thiols were derivatized with N-ethylmaleimide. The plasma was purified from proteins via ultrafiltration. Electrophoretic separation was performed using 115 mM Na phosphate with 7.5% (v/v) polyethylene glycol 600, pH 2.3. The in-capillary concentration of the analytes was achieved with a pH gradient created via the preinjection of triethanolamine and postinjection of phosphoric acid. The separation was carried out using a silica capillary (50 µm i.d.; total/effective separation length 42/35 cm) at a 25 kV voltage. The total analysis/regeneration time was 18 min. The quantification limits varied from 1.3 µM (rCysGly) to 5.4 µM (CysS). The accuracy was 95%-99%, and the repeatability and reproducibility were approximately 1.8%-3.8% and 1.9%-5.0%, respectively. An analysis of plasma samples from healthy volunteers (N = 41) showed that the mean levels of rCysGly, rCys, rGln, and CysS were 1.64, 10.6, 2.58, and 46.2 µM, respectively.

Pulsed-post column derivatization coupled to green liquid chromatography for the determination of glutathione and cysteine based on thioacrylates formation

In the present work, we developed a method for the determination of thiols (cysteine and glutathione) in yeast samples under the new concept of Pulsed-post column derivatization (Pulsed-PCD). For the chromatographic separation of the analytes, 100% aqueous mobile phase was used and the eluted compounds reacted on-line with the injected pulses (100 μL) of the derivatizing reagent (ethyl propiolate + Britton-Robinson buffer). Spectrophotometric detection of the derivatives was carried out at 285 nm. The Pulsed-PCD configuration, the selection of the analytical column and the pulsed-PCD reaction conditions were investigated. The method was validated for the determination of endogenous content of the analytes in dry and fresh yeasts, with LODs of 3.0 μmol L^-1. The percent recovery ranged between 85.2 and 114.4% in all cases and the results were compared with a corroborative method based on classical PCD. The analytical greenness of the proposed method was evaluated using two tools; Analytical Eco-Scale and Green Analytical Procedure Index (GAPI). The greenness score of the HPLC-Pulsed-PCD method (score = 77) was compared with that of the corroborative HILIC-PCD method (score = 71) and was found to be greener in terms of the amount of chemicals used and the produced wastes.

Use of metal nanoparticles for preconcentration and analysis of biological thiols

Metal nanoparticles (NPs) exhibit several unique physicochemical properties, including redox activity, surface plasmon resonance, ability to quench fluorescence, biocompatibility, or a high surface-to-volume ratio. They are being increasingly used in analysis and preconcentration of thiol containing compounds, because they are able to spontaneously form a stable Au/Ag/Cu-S dative bond. They thus find wide application in environmental and particularly in medical science, especially in the analysis of biological thiols, the endogenous compounds that play a significant role in many biological systems. In this review article, we provide an overview of various types of NPs that have been applied in analysis and preconcentration of biological thiols, mainly in human biological fluids. We first discuss shortly the types of NPs and their synthesis, properties, and their ability to interact with thiol compounds. Then we outline the sample preconcentration and analysis methods that were used for this purpose with special emphasis on optical, electrochemical, and separation techniques.

A red-emitting Europium(III) complex as a luminescent probe with large Stokes shift for the sequential determination of Cu2+ and biothiols in real samples

In this work, a novel Eu³⁺-DTPA-bis(AMC) complex with red luminescence was designed and synthesized for sequential detection of Cu²⁺ and biothiols (Cys/Hcy/GSH) based on the displacement strategy with the good selectivity, high sensitivity, and large Stokes shift (288 nm). The possible detection mechanism was verified by UV-vis, the high-resolution mass spectrometry, and the fluorescence decay curve. The experimental parameters, including the solution pH, the incubation time, the concentration ratio of Eu³⁺-DTPA-bis(AMC) to Cu²⁺ and biothiols concentration, were optimized. Under the optimal conditions, it shows a good linear relationship between the concentration (0-10 μM) of Cu²⁺ and the fluorescence intensity of Eu³⁺-DTPA-bis(AMC), with a low detection limit of 0.065 μM. The linear range and the limit of detection of the Eu³⁺-DTPA-bis(AMC)/Cu²⁺ system for Cys/Hcy/GSH were 2.5-22.5/5-45/5-50 μM and 0.11/0.07/0.05 μM, respectively. Surprisingly, the high or low concentration of Eu³⁺-DTPA-bis(AMC)/Cu²⁺ can significantly affect the selectivity of the sensing system to biothiols (Cys/GSH/Hcy). When the concentration of the Eu³⁺-DTPA-bis(AMC)/Cu²⁺ system is 10.0 μΜ, it could recognize biothiols (Cys/GSH/Hcy) from other substances, but when the concentration is as low as 3.3 μM, it could further specifically distinguished Cys from Hcy/GSH. Owing to the high anti-interference characteristics, accuracy and specificity, the sensing system was well applied to the cascade detection of Cu²⁺ in actual environmental samples and Cys in biological and food samples, including FBS, urine, milk, beverage, fresh juice with the satisfactory recoveries from 96.20 to 106.80 %.

A handheld-type total integrated capillary electrophoresis system for SARS-CoV-2 diagnostics: Power, fluorescence detection, and data analysis by smartphone

A micro-capillary electrophoresis (μCE) system is one of the widely adopted techniques in the molecular diagnostics and DNA sequencing due to the benefits of high resolution, rapid analysis, and low reagent consumption, but due to the requirements of bulky high-power suppliers and an expensive laser-induced fluorescence detector module, the conventional set-up of μCE system is not adequate for point-of-care (POC) molecular diagnostics. In this study, we constructed a miniaturized and integrated μCE system which can be manipulated by a smartphone. The smartphone not only powers two boost converters and an excited laser, but also controls the relay for the power switch. Moreover, the complementary metal-oxide-semiconductor (CMOS) camera of the smartphone was used for detecting the fluorescence signal of amplicons amplified with reverse transcription-polymerase chain reaction (RT-PCR). We also developed a web-based application so that the raw data of the recorded fluorescence intensity versus the running time can display typical capillary electropherograms on the smartphone. The total size of the hand-held μCE system was 9.6 cm [Width] × 22 cm [Length] × 15.5 cm [Height], and the weight was ∼1 kg, which is suitable for POC DNA testing. In the integrated smartphone-associated μCE system, we could accurately analyze two genes of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), namely N gene and S gene along with two bracket ladders in 6 min to identify SARS-CoV-2. Such an advanced μCE platform can be applied for a variety of on-site molecular diagnostics fields with user-friendliness.

Extended characterization of unpaired cysteines in an IgG1 monoclonal antibody by LC-MS analysis

The development of comprehensive methods to characterize unpaired cysteines in monoclonal antibodies (mAbs) is very important for understanding structural heterogeneity, impurity, and stability. In this paper, unpaired cysteines observed in a therapeutic antibody (mAb1) were thoroughly studied by Liquid Chromatography-Mass Spectrometry (LC-MS) methods at the intact mAb, domain, and peptide levels. Three cysteine variants were observed at the intact mAb level with each variant containing two unpaired cysteines. Variants containing four or six unpaired cysteines were not observed. Domain analysis indicated that two Fab variants, each containing two unpaired cysteines, were present while the third variant contained two unpaired cysteines on the Fc region. Peptide mapping analysis localized the six unpaired cysteines to Cys22/Cys96, Cys146/Cys202, and Cys369/Cys427 in the heavy chain. No significant changes were observed for these unpaired cysteines in mAb1 under high pH and heat-stressed conditions. Structural analysis and molecular modeling revealed that these unpaired cysteines were buried inside the three-dimensional structure. The integrated LC-MS methods together with stress studies and structural analysis may potentially be applied to the analysis of unpaired cysteines in other mAbs.

A novel colorimetric and fluorometric probe for biothiols based on MnO2 NFs-Rhodamine B system

Herein, a novel bimodal ratiometric probe for sensitive and selective detection of biothiols (including glutathione (GSH), cysteine (Cys) and homocysteine (Hcys)) was constructed, which was based on the redox reaction between manganese dioxide nanoflakes (MnO₂ NFs) and rhodamine (RhB) and biothiols. When MnO₂ NFs was added into RhB solution, RhB was oxidized to a series of derivatives, accompanying with the colorimetric color changing from purple to light pink and fluorescence changing from red to green. In the presence of GSH, Cys or Hcys, they could reduce MnO₂ NFs to Mn²⁺, thereby preventing the following oxidization of RhB and the corresponding color and fluorescence changes. The absorption intensity ratio and fluorescence intensity ratio showed good linear relationships with the concentrations of biothiols. The colorimetric detection limits for GSH, Cys and Hcys were 0.057 μM, 0.140 μM and 0.087 μM, respectively. And the fluorescence detection limits were 0.177 μM, 0.282 μM and 0.161 μM. More importantly, this probe was successfully applied to monitor the concentration of GSH/Cys/Hcys in human serum samples, with satisfactory recovery. Thus, this MnO₂ NFs-RhB platform can potentially be a candidate for the detection of biothiols.

Automated fluorimetric sensor for glutathione based on zone fluidics

A zone-fluidics (ZF) based automated fluorimetric sensor for the determination of glutathione (GSH) is reported. Discrete zones of GSH and o-phthalaldehyde (OPA) mix and react on-line under mild basic pH without the need of additional nucleophillic reagents, to yield a fluorescent isoindole derivative (λ_ex/λ_em = 340/425 nm). The proposed ZF sensor was optimized (pH, c(OPA), time, instrumental variables) and validated. Cysteine, glutamate, glycine and ammonium were representatively examined in terms of selectivity and were found not to react in 10-fold excess. Linearity was proved in the range of 5-100 μmol L^-1 GSH, with an LOD of 1 μmol L^-1 at a practical sampling rate of 20 h^-1 and RSD < 0.5% (within-day) and 4.2% (day-to-day). The dosage uniformity of commercially available GSH - containing nutraceuticals was evaluated.

Salt-effect enhanced hollow-fiber liquid-phase microextraction of glutathione in human saliva followed by miniaturized capillary electrophoresis with amperometric detection

A hollow-fiber liquid-phase microextraction (HF-LPME) method was established for purification and enrichment of glutathione (GSH) in human saliva followed by a miniaturized capillary electrophoresis with amperometric detection system (mini-CE-AD). Based on regulating isoelectric point and increasing salt effect to modify donor phase, HF-LPME could provide high enrichment efficiency for GSH up to 471 times, and the extract was directly injected for mini-CE-AD analysis. The salt-effect enhanced HF-LPME/mini-CE-AD method has been successfully applied to saliva analysis, and acceptable LOD (0.46 ng/mL, S/N = 3) and recoveries (92.7-101.3%) could be obtained in saliva matrix. The sample pretreatment of this developed method was simple and required no derivatization, providing a potential alternative for non-invasive fluid analysis using portable instrument.

Capillary electrophoresis for the investigation of two novel aminoalkanol derivatives of 1,7-diethyl-8,9-diphenyl-4-azatricyclo[5.2.1.02,6] dec-8-ene-3,5,10-trione as potential anticancer drugs in water solution and serum

A simple, rapid, capillary zone electrophoresis method was developed and validated for the analysis of two novel aminoalkanol derivatives (I) and (II) of 1,7-diethyl-8,9-diphenyl-4-azatricyclo[5.2.1.0^2,6 ]dec-8-ene-3,5,10-trione, which were found in earlier studies as potential anticancer drugs. Samples were analyzed to demonstrate the specificity and stability indicating ability of the developed method. The samples were extracted using n-hexane-ethyl acetate mixture in the ratio of 90:10. Electrophoretic separation was performed on a eCAP fused silica capillary (37 cm length, 50 µm inside diameter) with a 50 mM tetraborate buffer as a background electrolyte adjusted to pH = 2.5. The separation time of (I) and (II) was achieved within 7 min. In addition, analysis of the two compounds in the serum was conducted. Limits of detection of (I) and (II) by UV absorbance at 200 nm were achieved in the range of 87.4-92.1 ng/mL. The sufficient recovery was observed in the range of 90.3-99.8%. The quantification limits for the compounds (I) and (II) were in the range of 279.71-291.03 ng/mL, respectively. The method has been successfully applied to the analysis of compounds (I) and (II) in serum samples.

A Turn-On Fluorescent Probe for Sensitive Detection of Cysteine in a Fully Aqueous Environment and in Living Cells

We reported here a turn-on fluorescent probe (1) for the detection of cysteine (Cys) by incorporating the recognition unit of 2,4-dinitrobenzenesulfonyl ester (DNBS) to a coumarin derivative. The structure of the obtained probe was confirmed by NMR and HRMS techniques. The probe shows a remarkable fluorescence off-on response (∼52-fold) by the reaction with Cys in 100% aqueous buffer. The sensing mechanism was verified by the HPLC test. Probe 1 also displays high selectivity towards Cys. The detection limit was calculated to be 23 nM. Moreover, cellular experiments demonstrated that the probe is highly biocompatible and can be used for monitoring intracellular Cys.

Recent progress of sample stacking in capillary electrophoresis (2016-2018)

Electrophoretic sample stacking comprises a group of capillary electrophoretic techniques where trace analytes from the sample are concentrated into a short zone (stack). This paper is a continuation of our previous reviews on the topic and brings a survey of more than 120 papers published approximately since the second quarter of 2016 till the first quarter of 2018. It is organized according to the particular stacking principles and includes chapters on concentration adjustment (Kohlrausch) stacking, on stacking techniques based on pH changes, on stacking in electrokinetic chromatography and on other stacking techniques. Where available, explicit information is given about the procedure, electrolyte(s) used, detector employed and sensitivity reached. Not reviewed are papers on transient isotachophoresis which are covered by another review in this issue.

A novel glutathione-triggered theranostic prodrug for anticancer and imaging in living cells

A novel theranostic prodrug was designed and synthesized by conjugating a naphthalimide derivative with vitamin D2 via a disulfide linker. The prodrug featured a highly selective detection process for glutathione (GSH) and showed a red-shifted fluorescence within 30 min. Notably, it also exhibited antitumor activity similar to vitamin D2 and could be monitored by cellular imaging.

A Novel Dicyanoisophorone-Based Ratiometric Fluorescent Probe for Selective Detection of Cysteine and Its Bioimaging Application in Living Cells

A selective and ratiometric turn-on fluorescent probe was designed and synthesized by using a novel dicyanoisophorone-based derivative and acrylate moiety. The probe displayed high stability and good selectivity to cysteine (Cys) over homocysteine (Hcy) and glutathione (GSH). It also exhibited rapid response to Cys within 180 s. Most importantly, the fluorescence intensity ratio at 590 and 525 nm (I₅₉₀/I₅₂₅) was linearly dependent on the Cys concentration in the range from 0 to 40 μM and the detection limit calculated to be 0.48 μM. This probe was also applied for bioimaging of intracellular Cys in living HeLa cells with low cytotoxicity.

Recent developments in capillary and microchip electroseparations of peptides (2015-mid 2017)

The review brings a comprehensive overview of recent developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) to analysis, microscale isolation, purification, and physicochemical and biochemical characterization of peptides in the years 2015, 2016, and ca. up to the middle of 2017. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis (sample preseparation, preconcentration and derivatization, adsorption suppression and EOF control, and detection) are described. New developments in particular CE and CEC methods are presented and several types of their applications to peptide analysis are reported: qualitative and quantitative analysis, determination in complex (bio)matrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid, sequence and chiral analysis, and peptide mapping of proteins. Some micropreparative peptide separations are shown and capabilities of CE and CEC methods to provide important physicochemical characteristics of peptides are demonstrated.

Capillary electrophoresis coupled with chloroform-acetonitrile extraction for rapid and highly selective determination of cysteine and homocysteine levels in human blood plasma and urine

A rapid and selective method has been developed for highly sensitive determination of total cysteine and homocysteine levels in human blood plasma and urine by capillary electrophoresis (CE) coupled with liquid-liquid extraction. Analytes were first derivatized with 1,1'-thiocarbonyldiimidazole and then samples were purified by chloroform-ACN extraction. Electrophoretic separation was performed using 0.1 M phosphate with 30 mM triethanolamine, pH 2, containing 25 μM CTAB, 2.5 μM SDS, and 2.5% polyethylene glycol 600. Samples were injected into the capillary (with total length 32 cm and 50 μm id) at 2250 mbar*s and subsequent injection was performed for 30 s with 0.5 M KОН. The total analysis time was less than 9 min, accuracy was 98%, and precision was <2.6%. The LOD was 0.2 μM for homocysteine and 0.5 μM for cysteine. The use of liquid-liquid extraction allowed the precision and sensitivity of the CE method to be significantly increased. The validated method was applied to determine total cysteine and homocysteine content in human blood plasma and urine samples obtained from healthy volunteers and patients with kidney disorders.

Recent advances in protein analysis by capillary and microchip electrophoresis

This review article describes the significant recent advances in the analysis of proteins by capillary and microchip electrophoresis during the period from mid-2014 to early 2017. This review highlights the progressions, new methodologies, innovative instrumental modifications, and challenges for efficient protein analysis in human specimens, animal tissues, and plant samples. The protein analysis fields covered in this review include analysis of native, reduced, and denatured proteins in addition to Western blotting, protein therapeutics and proteomics.