Electrolyte formulation strategies for potassium-based batteries

Nonflammable Phosphate-Based Electrolyte for Safe and Stable Potassium Batteries Enabled by Optimized Solvation Effect

Current potassium-ion batteries (PIBs) are limited in safety and lifetime owing to the lack of suitable electrolyte solutions. To address these issues, herein, we report an innovative non-flammable electrolyte design strategy that leverages an optimal moderate solvation phosphate-based solvent which strikes a balance between solvation capability and salt dissociation ability, leading to superior electrochemical performance. The formulated electrolyte simultaneously exhibits the advantages of low salt concentration (only 0.6 M), low viscosity, high ionic conductivity, high oxidative stability, and safety. Our electrolyte also promotes the formation of self-limiting inorganic-rich interphases at the anode surface, alongside robust cathode-electrolyte interphase on iron-based Prussian blue analogues, mitigating electrode/electrolyte side reactions and preventing Fe dissolution. Notably, the PIBs employing our electrolyte exhibit exceptional durability, with 80 % capacity retention after 2,000 cycles at high-voltage of 4.2 V in a coin cell. Impressively, in a larger scale pouch cell, it maintains over 81 % of its initial capacity after 1,400 cycles at 1 C-rate with high average Coulombic efficiency of 99.6 %. This work represents a significant advancement toward the realization of safe, sustainable, and high-performance PIBs.

Building Stable Solid-State Potassium Metal Batteries

Solid-state potassium metal batteries (SPMBs) are promising candidates for the next generation of energy storage systems for their low cost, safety, and high energy density. However, full SPMBs are not yet reported due to the K dendrites, interfacial incompatibility, and limited availability of suitable solid-state electrolytes. Here, stable SPMBs using a new iodinated solid polymer electrolyte (ISPE) are presented. The functional ions reconstruct ion transport channels, providing efficient potassium ion transport. ISPE shows a combination of high ionic conductivity, superior interfacial compatibility, and electrochemical stability. In situ alloying and iodinated interlayer increase K metal compatibility for prolonged cycling with low polarization. Moreover, the ISPE enables SPMBs with Prussian blue cathode stable operation at a high voltage of 4.5 V, a superior rate capability, and long-term cycling over 3000 cycles (4.2 V vs K+/K) with an ultra-high coulombic efficiency of 99.94%. More importantly, a classic solid-state potassium metal pouch cell achieves 4.2 V stable cycling over 800 cycles with a high retention of 93.6%, presenting a new development strategy for secure and high-performance rechargeable solid-state potassium metal batteries.

Ultrastable Dendrite-Free Potassium Metal Batteries Enabled by Weakly-Solvated Electrolyte

Potassium (K) metal is considered one of the most promising anodes for potassium metal batteries (PMBs) because of its abundant and low-cost advantages but suffers from serious dendritic growth and parasitic reactions, resulting in poor cyclability, low Coulombic efficiency (CE), and safety concerns. In this work, we report a localized high-concentration electrolyte (LHCE) consisting of potassium bis(fluorosulfonyl)imide (KFSI) in a cosolvent of 1,2-dimethoxyethane (DME) and 1,1,2,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (TTE) to solve the problems of PMBs. TTE as a diluent not only endows LHCE with advantages of low viscosity, good wettability, and improved conductivity but also solves the dendrite problem pertaining to K metal anodes. Using the formulation of LHCE, a CE of 98% during 800 cycles in the K||Cu cell and extremely stable cycling of over 2000 h in the K||K symmetric cell are achieved at a current density of 0.1 mA cm-2. In addition, the LHCE shows good compatibility with a Prussian Blue cathode, allowing almost 99% CE for the K||KFeIIFeIII(CN)6 full cell during 100 cycles. This promising electrolyte design realizes high-safety and energy-dense PMBs.

Programmable kernel structures of atomically precise metal nanoclusters for tailoring catalytic properties

The unclear structures and polydispersity of metal nanoparticles (NPs) seriously hamper the identification of the active sites and the construction of structure-reactivity relationships. Fortunately, ligand-protected metal nanoclusters (NCs) with atomically precise structures and monodispersity have become an ideal candidate for understanding the well-defined correlations between structure and catalytic property at an atomic level. The programmable kernel structures of atomically precise metal NCs provide a fantastic chance to modulate their size, shape, atomic arrangement, and electron state by the precise modulating of the number, type, and location of metal atoms. Thus, the special focus of this review highlights the most recent process in tailoring the catalytic activity and selectivity over metal NCs by precisely controlling their kernel structures. This review is expected to shed light on the in-depth understanding of metal NCs' kernel structures and reactivity relationships.

Metallic B2C3P Monolayer as Li-Ion Battery Materials: A First-Principles Study

The search for and design of high-performance electrode materials is always an important topic in rechargeable batteries. Using a global structure prediction method together with first-principles calculations, a free-standing two-dimensional B2C3P monolayer with honeycomb structure was identified. The stability of the B2C3P monolayer was confirmed by cohesive energy, phonon curves, and ab initio molecular dynamics calculations. Of note, the B2C3P monolayer was demonstrated to be metallic, which shows excellent performance for Li-ion batteries. For example, the B2C3P monolayer also exhibited a metallic characteristic after Li adsorption, therefore the ability to keep good electrical conductivity during battery operation. Furthermore, when a B2C3P monolayer is used as a lithium-ion battery anode, it shows an ultra-high theoretical capacity of 3024 mAh/g, and a comparatively low diffusion barrier of 0.33 eV. All calculated results showed that the B2C3P monolayer is an appealing anode material, and has great potential in energy storage devices.