Side chain influencing the interaction between β-cyclodextrin and vanillin

Dual-function β-cyclodextrin/starch-based intelligent film with reversible responsiveness and sustained bacteriostat-releasing for food preservation and monitoring

The full combination of high sensitivity indication and long-lasting bacteriostatic function is an innovative need to meet the practicality of intelligent film packaging systems for food products. Hence, Blueberry anthocyanins (BA) copigmentated by ferulic acid (FA) was used as an indicator, and cinnamon essential oil (CO) encapsulated by β-cyclodextrin (β-CD) as a bacteriostat, potato starch (PS) as a film-forming substrate to prepared a dual-function starch-based intelligent active packaging film with pH indicator and antibacterial function. FA had the best copigmentation effect with a threefold increase in a value compared to other phenolic acids. The ΔE value increased from 3.24 to 5.13 at pH 2-8, and the change was still prominent in acid-base alternating test, indicating a high response sensitivity. Notably, the yellow gamut of indicating terminus increased its visibility to the naked eye. The release behavior of CO from film was in line with Fick's diffusion. Meanwhile, the release of CO delayed to about 90 h through β-cyclodextrin encapsulation, showing a high growth-inhibition rate in E. coli and S. aureus of almost 100 %. In this study, a dual-function film with indication and bacteriostasis was prepared and enhanced with both, expanding its wide application in intelligent packaging of fresh food.

Preparation and application of cinnamon-Litsea cubeba compound essential oil microcapsules for peanut kernel postharvest storage

This research developed a novel, efficient and safe antimildew for peanut kernel postharvest storage. The antimildew, cinnamon-Litsea cubeba compound essential oil (CLCEO) microcapsule (CLCEOM), was synthesized with CLCEO as core materials and β-cyclodextrin as wall materials. Fourier transform infrared spectroscopy and gas chromatography-mass spectrometry analyses indicated that major antifungal compounds of CLCEO were encapsulated in the cavity of β-cyclodextrin. The inhibition zone experiment showed that CLCEOM retained antifungal effect on Aspergillus spp. strains even after storage for 2 months at 4 ℃. Besides, CLCEOM reduced total number of fungal colonies, relative abundance of Aspergillus spp., and aflatoxin B₁ content of peanut kernels, and had positive effect on slowing down the increase in acid value of peanut oil without causing any adverse effect on the viability and sensory properties during storage process. Overall, CLCEOM presented good preservative effects on peanut kernels, providing evidence for its potential use as antimildew for peanut storage.

Encapsulation of Phenolic Compounds from a Grape Cane Pilot-Plant Extract in Hydroxypropyl Beta-Cyclodextrin and Maltodextrin by Spray Drying

Grape canes, the main byproducts of the viticulture industry, contain high-value bioactive phenolic compounds, whose application is limited by their instability and poorly solubility in water. Encapsulation in cyclodextrins allows these drawbacks to be overcome. In this work, a grape cane pilot-plant extract (GC_PPE) was encapsulated in hydroxypropyl beta-cyclodextrin (HP-β-CD) by a spray-drying technique and the formation of an inclusion complex was confirmed by microscopy and infrared spectroscopy. The phenolic profile of the complex was analyzed by LC-ESI-LTQ-Orbitrap-MS and the encapsulation efficiency of the phenolic compounds was determined. A total of 42 compounds were identified, including stilbenes, flavonoids, and phenolic acids, and a complex of (epi)catechin with β-CD was detected, confirming the interaction between polyphenols and cyclodextrin. The encapsulation efficiency for the total extract was 80.5 ± 1.1%, with restrytisol showing the highest value (97.0 ± 0.6%) and (E)-resveratrol (32.7 ± 2.8%) the lowest value. The antioxidant capacity of the inclusion complex, determined by ORAC-FL, was 5300 ± 472 µmol TE/g DW, which was similar to the value obtained for the unencapsulated extract. This formulation might be used to improve the stability, solubility, and bioavailability of phenolic compounds of the GC_PPE for water-soluble food and pharmaceutical applications.

Synthesis and Characterization of β-Cyclodextrin-Essential Oil Inclusion Complexes for Tick Repellent Development

Essential oils (EOs) are used in several pest management applications. Due to their volatility, EOs may experience bioactivity reduction, thus requiring protection to extend their properties. In the present study, we investigated the inclusion complex formation (IC) of β-cyclodextrin (β-CD) with selected EOs with known tick repellent activity using two co-precipitation methods. ICs were characterized by evaluating EO mass concentration and inclusion efficiency (% IE) and other instrumental methods. Co-precipitation method 2 yielded the highest EO mass concentration (88 ± 6 μg/mg β-CD) for the 1:1 molar ratio geranium Egyptian EO IC. The EO volatile release over time from the ICs was investigated by headspace SPME/GC-MS analysis. ICs were also tested in tick repellency bioassays. ICs reported significant tick repellent activity, with lemongrass IC performing best overall. Method 1 showed the best combination of high mass concentration EO, controlled volatile release, and tick repellency with lemongrass EO. The results demonstrated that β-CD had selectively encapsulated different EOs. Moreover, the formation of ICs may improve EO tick repellent properties protecting the active ingredients and providing a better, long-lasting repellent action. These findings will allow the development of more effective naturally derived repellent products to protect individuals from tick bites and prevent tick-borne illnesses.

Comparative chemical examination of inclusion complexes formed with β-cyclodextrin derivatives and basic amino acids

In this study, we have investigated the host-guest inclusion complexes between β-cyclodextrin (βCD), 2-hydroxypropyl-β-cyclodextrin (2-HPβCD), and mono-6-tosyl-β-cyclodextrin (TS-βCD) excipients and two amino acids, such as L-arginine (L-Arg) and L-lysine (L-Lys). The formation of inclusion complexes was detected, and a comparative study was conducted at different pH, density, and viscosity. A physical mixture, comprising equal amount of amino acids was used to prepare the complex in a solid-state form. The experimental parameters, such as apparent molar volume, limiting apparent molar volume, partial molar volume were analyzed by measuring density at infinite dilution. The other quantities, such as dynamic viscosity, kinematic viscosity, relative viscosity, intrinsic viscosity, spatial viscosity, activation energy were determined for amino acid/βCD complexes at various mass fractions of βCDs and different temperatures. Finally, we found moderate (R² > 0.5) and strong (R² > 0.7) linear relationships (p-value < 0.0001) between the dynamic viscosity and the temperature: the temperature evaluation promotes the decrease in dynamic viscosity for amnio acid-βCD (its derivatives) complexes. The results of this study emphasize important properties of analyzed complexes that can be utilized in the development of controlled drug delivery vectors.

Preparation and Characterisation of Polyphenol-HP-β-Cyclodextrin Inclusion Complex that Protects Lamb Tripe Protein against Oxidation

Grape seed extract (GSE) displays strong antioxidant activity, but its instability creates barriers to its applications. Herein, three HP-β-CD/GSE inclusion complexes with host-guest ratios of 1:0.5, 1:1, and 1:2 were successfully prepared by co-precipitation method to improve stability. Successful embedding of GSE in the HP-β-CD cavity was confirmed by fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM) analyses. The Autodock Tools 1.5.6 was used to simulate the three-dimensional supramolecular structure of the inclusion complex of 2-hydroxypropyl-β-cyclodextrin and grape seed extract (HP-β-CD/GSE) by molecular docking. The MALDI-TOF-MS technology and chemical database Pubchem, and structural database PDB were combined to reconstitute the three-dimensional structure of target protein. The binding mode of the HP-β-CD/GSE inclusion complex to target protein was studied at the molecular level, and the antioxidant ability of the resulting HP-β-CD/GSE inclusion complexes was investigated by measuring 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging. The effects of HP-β-CD/GSE on myofibrillar protein from lamb tripe were also investigated under oxidative conditions. The positions and interactions of the binding sites of HP-β-CD/GSE inclusion complexes and target protein receptors were simulated by molecular docking. The results showed that HP-β-CD/GSE inclusion complexes were successfully prepared, optimally at a molar ratio of 1:2. At low (5 μmol/g) to medium (105 μmol/g) concentrations, HP-β-CD/GSE inclusion complexes decreased the carbonyl content, hydrophobicity, and protein aggregation of myofibrillar protein from lamb tripe, and increased the sulphydryl content. Furthermore, high concentration (155 μmol/g) of HP-β-CD/GSE inclusion complexes promoted protein oxidation.

Characterization of Cyclodextrin/Volatile Inclusion Complexes: A Review

Cyclodextrins (CDs) are a family of cyclic oligosaccharides that constitute one of the most widely used molecular hosts in supramolecular chemistry. Encapsulation in the hydrophobic cavity of CDs positively affects the physical and chemical characteristics of the guests upon the formation of inclusion complexes. Such a property is interestingly employed to retain volatile guests and reduce their volatility. Within this scope, the starting crucial point for a suitable and careful characterization of an inclusion complex is to assess the value of the formation constant (K_f), also called stability or binding constant. This task requires the application of the appropriate analytical method and technique. Thus, the aim of the present paper is to give a general overview of the main analytical tools used for the determination of K_f values for CD/volatile inclusion complexes. This review emphasizes on the advantages, inconvenients and limits of each applied method. A special attention is also dedicated to the improvement of the current methods and to the development of new techniques. Further, the applicability of each technique is illustrated by a summary of data obtained from the literature.

Polymer-free nanofibers from vanillin/cyclodextrin inclusion complexes: high thermal stability, enhanced solubility and antioxidant property

Vanillin/cyclodextrin inclusion complex nanofibers (vanillin/CD-IC NFs) were successfully obtained from three modified CD types (HPβCD, HPγCD and MβCD) in three different solvent systems (water, DMF and DMAc) via an electrospinning technique without using a carrier polymeric matrix. Vanillin/CD-IC NFs with uniform and bead-free fiber morphology were successfully produced and their free-standing nanofibrous webs were obtained. The polymer-free CD/vanillin-IC-NFs allow us to accomplish a much higher vanillin loading (∼12%, w/w) when compared to electrospun polymeric nanofibers containing CD/vanillin-IC (∼5%, w/w). Vanillin has a volatile nature yet, after electrospinning, a significant amount of vanillin was preserved due to complex formation depending on the CD types. Maximum preservation of vanillin was observed for vanillin/MβCD-IC NFs which is up to ∼85% w/w, besides, a considerable amount of vanillin (∼75% w/w) was also preserved for vanillin/HPβCD-IC NFs and vanillin/HPγCD-IC NFs. Phase solubility studies suggested a 1 : 1 molar complexation tendency between guest vanillin and host CD molecules. Molecular modelling studies and experimental findings revealed that vanillin : CD complexation was strongest for MβCD when compared to HPβCD and HPγCD in vanillin/CD-IC NFs. For vanillin/CD-IC NFs, water solubility and the antioxidant property of vanillin was improved significantly owing to inclusion complexation. In brief, polymer-free vanillin/CD-IC NFs are capable of incorporating a much higher loading of vanillin and effectively preserve volatile vanillin. Hence, encapsulation of volatile active agents such as flavor, fragrance and essential oils in electrospun polymer-free CD-IC NFs may have potential for food related applications by integrating the particularly large surface area of NFs with the non-toxic nature of CD and inclusion complexation benefits, such as high temperature stability, improved water solubility and an enhanced antioxidant property, etc.

Encapsulation of l-menthol in hydroxypropyl-β-cyclodextrin and release characteristics of the inclusion complex

l-menthol has been widely used in flavour, food and pharmaceuticals. Because of its high volatility and whisker growth, l-menthol-hydroxypropyl-β-cyclodextrin inclusion complex was produced to improve shelf-life, provide protection, and enhance the stability of l-menthol. The inclusion complex was characterized by Fourier transform infrared spectroscopy, X-ray diffraction. The results show that l-menthol was successfully encapsulated in hydroxypropyl-β-cyclodextrin. l-menthol loading capacity is about 8.44%. Geometries and binding energies of l-menthol-hydroxypropyl-β-cyclodextrin inclusion complexes were investigated using molecular mechanics calculations. The shape and orientation of the most stable complex, and the minimum binding energy were determined. L-menthol release from complex was determined by thermogravimetric analysis. Two l-menthol release rate peaks were observed at 69.3 and 279.1°C. The l-menthol release reaction order, release activation energy and the preexponential factor were obtained.

Characterization of beta-cyclodextrin inclusion complexes containing an essential oil component

An important issue in food technology is that antimicrobial compounds can be used for various applications, such as the development of antimicrobial active packaging materials. Yet most antimicrobial compounds are volatile and require protection. In the present study, the inclusion complexes of 2-nonanone (2-NN) with β-cyclodextrin (β-CD), were prepared by a co-precipitation method. Entrapment efficiency (EE), thermal analysis (DSC and TGA), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FT-IR), sorption isotherms and antifungal activity were evaluated for the characterization of the inclusion complex (β-CD:2-NN). A higher EE was obtained (34.8%) for the inclusion complex 1:0.5 than for other molar rates. Both DSC and TGA of the inclusion complexes showed the presence of endothermic peaks between 80 °C and 150 °C, attributed to a complexation phenomenon. Antimicrobial tests for mycelial growth reduction under atmospheric conditions proved the fungistatic behaviour of the inclusion complexes against Botrytis cinerea.

Preparation, release and physicochemical characterisation of ethyl butyrate and hexanal inclusion complexes with β- and γ-cyclodextrin

Complexes of ethyl butyrate and hexanal encapsulated by β-cyclodextrin (β-CD) and γ-cyclodextrin (γ-CD) were prepared by coprecipitation, and gas chromatography was used to quantity the flavour compounds in the complexes. The ethyl butyrate-γ-CD complex had the highest inclusion ratio (12.20%) followed by the ethyl butyrate-β-CD, hexanal-β-CD and hexanal-γ-CD complexes (11.29, 4.41 and 3.33%, respectively). Release experiments were performed under different relative humidities (RH 93, 75 and 52%) and temperatures (4 and 25 °C). The flavour release behaviours of the complexes were described by the Avrami equation. The rate of flavour release was enhanced with both increasing temperature and RH, although the effect of RH was stronger. Physicochemical characterisation using FT-IR, XRD, DSC and SEM analyses demonstrated that crystalline complexes were formed. Both β-CD and γ-CD were able to encapsulate ethyl butyrate and hexanal, and lower RH and temperature were more suitable for the storage of these complexes.

Preparation, characterization, and thermal stability of β-cyclodextrin/soybean lecithin inclusion complex

β-Cyclodextrin (β-CD), which is widely used to increase the stability, solubility, and bioavailability of guests, can form host-guest inclusion complexes with a wide variety of organic molecules. In this study the β-CD/soybean lecithin inclusion complex was prepared. The effect of reaction parameters such as reaction temperature, reaction time and the molar ratio of β-CD/soybean lecithin on inclusion ratio were studied. The inclusion ratio of the product prepared under the optimal conditions of β-CD/soybean lecithin molar ratio 2:1, reaction temperature 60°C reaction time 2h was 40.2%. The results of UV-vis, DSC, XRD and FT-IR spectrum indicated the formation of inclusion complex. The thermal stability experiment indicated that the thermal stability of soybean lecithin in inclusion complex was significantly improved compared with free soybean lecithin.