Effects of high hydrostatic pressure on the rheological properties and foams/emulsions stability of Alyssum homolocarpum seed gum

Enhancement of oxidative stability of camelina oil via Alyssum homolocarpum seed gum/sodium alginate-based microcapsules loaded with Echinacea purpurea (L.) extract

Alyssum homolocarpum seed gum (AHSG) and sodium alginate (SA) were utilized as wall materials for the microencapsulation of Echinacea purpurea extract via spray drying. Furthermore, effect of microcapsules on the oxidative stability of camelina oil was assessed over a 30-day storage period. The results showed that with an increase in AHSG concentration, the particle size, polydispersity index, and zeta potential of emulsions decreased, while their viscosity, and stability increased. Microcapsules prepared with AHSG alone exhibited the highest encapsulation efficiency (90.70 %), loading efficiency (40.70 %), and water solubility (88.47 %), but the lowest moisture content (1.45 %), water activity (0.31), wettability (198 s), and hygroscopicity (13.50 g/100 g). Scanning electron microscopy analysis revealed a spherical and smooth surface for AHSG alone-based microcapsules. Fourier transform infrared spectroscopy analysis indicated that certain chemical interactions occurred between the E. purpurea extract and wall materials. By incorporating AHSG/SA-based microcapsules containing E. purpurea extract into camelina oil, the peroxide value (increasing from 1.79 to 5.12 meq∙O2/kg) and anisidine value (increasing from 1.63 to 7.09) were maintained during the 30-day storage period. In conclusion, the microcapsules prepared with AHSG alone showed significant potential for encapsulating E. purpurea extract and subsequently enhancing oxidative stability of camelina oil, comparable to TBHQ.

Comparison of four rheological models for estimating viscosity and rheological parameters of microwave treated Basil seed gum

Dispersion of Basil seed gum has high viscosity and exhibits shear-thinning behavior. This study aimed to analyze the influence of microwave treatment (MT) at various time intervals (0, 1, 2, and 3 min) on the viscosity and rheological behavior of Basil seed gum dispersion (0.5%, w/v). The finding of this study revealed that the apparent viscosity of Basil seed gum dispersion (non-treated dispersion) reduced from 0.330 Pa.s to 0.068 Pa.s as the shear rate (SR) increased from 12.2 s-1 to 171.2 s-1. Additionally, the apparent viscosity of the Basil seed gum dispersion reduced from 0.173 Pa.s to 0.100 Pa.s as the MT time increased from 0 to 3 min (SR = 61 s-1). The rheological properties of gum dispersion were successfully modeled using Power law (PL), Bingham, Herschel-Bulkley (HB), and Casson models, and the PL model was the best one for describing the behavior of Basil seed gum dispersion. The PL model showed an excellent performance with the maximum r-value (mean r-value = 0.942) and the minimum sum of squared error (SSE) values (mean SSE value = 5.265) and root mean square error (RMSE) values (mean RMSE value = 0.624) for all gum dispersion. MT had a considerable effect on the changes in the consistency coefficient (k-value) and flow behavior index (n-value) of Basil seed gum dispersion (p < 0.05). The k-value of Basil seed gum dispersion decreased significantly from 3.149 Pa.sn to 1.153 Pa.sn (p < 0.05) with increasing MT time from 0 to 3 min. The n-value of Basil seed gum dispersion increased significantly from 0.25 to 0.42 (p < 0.05) as the MT time increased. The Bingham plastic viscosity of Basil seed gum dispersion increased significantly from 0.029 Pa.s to 0.039 Pa.s (p < 0.05) while the duration of MT increased. The Casson yield stress of Basil seed gum dispersion notably reduced from 5.010 Pa to 2.165 Pa (p < 0.05) with increasing MT time from 0 to 3 min.

Polylactic Acid/Saqqez Gum Blends for Chewing Gum Applications: Impact of Plasticizers on Thermo-Mechanical and Morphological Properties

This study investigated a blend of poly (lactic acid) (PLA) and Saqqez gum, with a weight ratio of 70:30, respectively, along with two plasticizers, acetyl tributyl citrate (ATBC) and polyethylene glycol (PEG), at three different concentrations (14%, 16% and 18% by weight of the PLA). The blend was analyzed using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), tensile tests, water-absorption behavior (coefficients of water absorption, sorption, diffusion and permeability of the samples during 240 h) and chemical resistance (exposure to 1 mol/L HCl and 1 mol/L NaOH for 240 h). The desired elastomer blend was then used to prepare natural chewing gum, which was subsequently subjected to texture profile analyzer (TPA) tests and sensory evaluation. The results showed that the addition of both plasticizers increased the tensile properties of the blend. Compared to neat PLA, all the blends exhibited an increase in elongation at break and a decrease in yield strength, with the maximum elongation at break (130.6%) and the minimum yield strength (12.2 MPa) observed in the blend containing 16% ATBC. Additionally, all the thermal attributes studied, including Tg, Tc and Tm, were lower than those of neat PLA, and the Tg values deviated from the values predicted via Fox's equation. SEM images of the blends confirmed that plasticization improved the homogeneity and distribution of the components in the blend structure. PEG 18% and ATBC 16% exhibit the highest and lowest water-absorption behavior, respectively. Regarding chemical resistance, all blends showed weight gain when exposed to HCl, while no weight loss was observed for resistance to NaOH. The chewing gum sample obtained similar values for the mentioned tests compared to the commercial control sample. Overall, the results indicate that plasticization enhances the structure and performance of the PLA/Saqqez gum blend and further investigation is warranted.

The effect of high hydrostatic pressure on the structure of whey proteins-guar gum mixture

The effect of high hydrostatic pressure (HHP) on the structural properties of whey protein concentrate (WPC) and guar gum mixture has been investigated at pH 5. WPC (6 % w/v) and guar gum (0.25 % w/v) mixture was freeze dried after adjusting pH and treated at different pressure levels (0-600 MPa) for 0-30 min. The solubility of treated powders decreased significantly (p < 0.05) as treatment time and pressure levels increased. Thermal analysis showed an increase in denaturation temperature after HHP treatment at 600 MPa. A more crystalline structure was observed in samples treated with 600 MPa for 20 and 30 min. With increasing pressure and time, particle size of the samples increased and the highest particle size was belonged to sample treated at 600 MPa for 30 min (759.66 nm). SEM results exhibited that by applying the pressure, irregularity of shapes and particle size increased while the apparent cracks decreased. FTIR results indicated that HHP treatment changed shift in bond and peak intensity. As reported in the current study, the application of HHP treatment as a green physical technology on protein-polysaccharide mixture could be used to improve interaction of protein and polysaccharide.

Effects of Concentration and Heating/Cooling Rate on Rheological Behavior of Sesamum indicum Seed Hydrocolloid

Hydrocolloids are known as natural hydrophilic biopolymers that can contribute viscosity and gelation in solution, as well as nutritional benefits, thus, they are widely used in the food industry. In our work, hydrocolloid was isolated by aqueous extraction of Sesamum indicum seed at 80 °C and pH 8.0. The chemical composition and functional properties of Sesamum indicum seed hydrocolloid (SISH) were characterized, and the effects of concentration including 1%, 2%, and 3% as well as heating/cooling rate (1, 5, and 10 °C/min) on the rheological behavior of SISH dispersions in aqueous solution were investigated. The viscoelastic properties of SISH dispersions were characterized by small-amplitude oscillatory shear measurement. The resultant SISH consisted of 60.95% carbohydrate and 23.32% protein, and was thus endowed with a relatively high water-holding capacity, solubility, appropriate emulsifying and foaming properties. Rheological results revealed that the aqueous dispersion of SISH exhibited a non-Newtonian shear-thinning flow behavior. The viscoelastic moduli changes were found to be dependent on SISH concentration, temperature, and heating/cooling rate. Increasing SISH concentrations from 1% to 3% promoted the development of stronger cross-link network. The mechanical spectra derived from strain and frequency sweep measurements showed that the storage moduli were always higher than the loss moduli, and the loss tangent was calculated to be above 0.1 and below 1.0. Furthermore, both moduli had slight frequency dependency, and the complex viscosity exhibited an almost linear reduction with the increase of frequency. Therefore, SISH dispersion behaved as a weak gel-like system. The hysteresis of viscoelastic moduli during heating and cooling reduced with decreasing the heating-cooling rates from 10 to 1 °C/min, suggesting that SISH molecules had enough time to develop a stable and thermally irreversible network. Overall, SISH can be regarded as an acceptable hydrocolloid for generating natural food components with intriguing functional and rheological qualities in the formulation of microstructured goods.

Comparative study of thermo-mechanical, rheological, and structural properties of gluten-free model doughs from high hydrostatic pressure treated maize, potato, and sweet potato starches

Effects of high hydrostatic pressure (HHP, 100, 300 and 500 MPa for 30 min at 25 °C) treated maize (MS), potato (PS), and sweet potato (SS) starches on thermo-mechanical, rheological, microstructural properties and water distribution of gluten-free model doughs were investigated. Significant differences were found among starch model doughs in terms of water absorption, dough development time, and dough stability at 500 MPa. Total gas production of MS, PS and SS doughs was significantly increased from 541 to 605 mL (300 MPa), 527 to 568 mL (500 MPa) and 551 to 620 mL (500 MPa) respectively as HHP increased. HHP increased storage (G') and loss (G″) modulus in terms of rheological properties suggesting, the higher viscoelastic behavior of starch model doughs. The dough after 500 MPa treatment showed lower degree of dependence of G' on frequency sweep suggesting, the formation of a stable network structure. In addition, continuous abundant water distribution and uniform microstructure were found in MS (300 MPa), PS (500 MPa) and SS (500 MPa) doughs for 60 min fermentation. Thus, the starches after HHP show great application potential in gluten-free doughs with improved characteristics.

Effects of Pressure Level and Time Treatment of High Hydrostatic Pressure (HHP) on Inulin Gelation and Properties of Obtained Hydrogels

The aim of this study was the evaluation of the influence of different HHP levels (150 and 300 MPa) and time treatment (5, 10, 20 min) on the gelation and properties of hydrogels with different inulin concentration (15, 20, 25 g/100 g). High-pressure treatment, in tested ranges, induces inulin gels and allows obtaining gel structures even at a lowest tested inulin content (i.e., 15 g/100 g). Selecting the pressure parameters, it is possible to modify the characteristics of the created hydrogels. The use of higher pressure (i.e., 300 MPa) allows to increase the stability of the hydrogels and change their structure to more compressed, which results in higher yield stress, lower spreadability, harder and more adhesive structure. For example, increasing the inulin gelling induction pressure (concentration 20 g/100 g) from 150 to 300 MPa with a time treatment of 10 min resulted in an increase in yield stress from 38.1 to 711.7 Pa, spreadability force from 0.59 to 4.59 N, firmness from 0.11 to 1.46 N, and adhesiveness from −0.06 to −0.65 N. Extending the time treatment of HHP increases this effect, but mainly when higher pressure and a higher concentration of inulin are being used. For example, extension of time treatment at 300 MPa pressure from 5 to 20 min resulted in an increase in yield stress from 774.8 to 1273.8 Pa, spreadability force from 6.28 to 8.43 N, firmness from 1.87 to 2.98 N, and adhesiveness from −0.94 to −1.27 N. The obtained results indicate the possibility of using HHP to create inulin hydrogels tailored to the characteristics in a specific food product.