Eco-Friendly and High Performance Supercapacitors for Elevated Temperature Applications Using Recycled Tea Leaves

Eco-friendly synthesis of an α-Fe2O3/rGO nanocomposite and its application in high-performance asymmetric supercapacitors

This work presents an innovative and environmentally friendly biological synthesis approach for producing α-Fe2O3 nanoparticles (NPs) and the successful synthesis of α-Fe2O3/reduced graphene oxide (rGO) nanocomposites (NCs). This novel synthesis route utilizes freshly extracted albumin, serving as both a reducing agent and a stabilizing agent, rendering it eco-friendly, cost-effective, and sustainable. A combination of characterization techniques including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and field emission scanning electron microscopy (FE-SEM) was employed to predict and confirm the formation of the as-synthesized α-Fe2O3 NPs and α-Fe2O3/rGO NCs. Transmission electron microscopy (TEM) verified the anisotropic nature of the synthesized nanoparticles. To gain insight into the enhanced capacitance of the α-Fe2O3/rGO NCs, a series of electrochemical tests, namely cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), electrochemical impedance spectroscopy (EIS), and stability assessments, were conducted in a conventional three-electrode configuration. Furthermore, a two-electrode asymmetric supercapacitor (ASC) device was fabricated to assess the practical viability of this material. The α-Fe2O3/rGO NCs exhibited a remarkable potential window of 2 V in an aqueous electrolyte, coupled with exceptional cycling stability. Even after undergoing 10 000 cycles, the capacitive retention exceeded 100%, underlining the promising potential of this material for advanced energy storage applications.

Tunable control of the performance of aqueous-based electrochemical devices by post-polymerization functionalization

Functionalized polymeric mixed ionic-electronic conductors (PMIECs) are highly desired for the development of electrochemical applications, yet are hindered by the limited conventional synthesis techniques. Here, we propose a "graft-onto-polymer" synthesis strategy by post-polymerization functionalization (GOP-PPF) to prepare a family of PMIECs sharing the same backbone while functionalized with varying ethylene glycol (EG) compositions (two, four, and six EG repeating units). Unlike the typical procedure, GOP-PPF uses a nucleophilic aromatic substitution reaction for the facile and versatile attachment of functional units to a pre-synthesized conjugated-polymer precursor. Importantly, these redox-active PMIECs are investigated as a platform for energy storage devices and organic electrochemical transistors (OECTs) in aqueous media. The ion diffusivity, charge mobility and charge-storage capacity can be significantly improved by optimizing the EG composition. Specifically, g2T2-gBT6 containing the highest EG density gives the highest charge-storage capacity exceeding 180 F g-1 among the polymer series, resulting from the improved ion diffusivity. Moreover, g2T2-gBT4 with four EG repeating units exhibits a superior performance compared to its two analogues in OECTs, associated with a high μC* up to 359 F V-1 cm-1 s-1, owing to the optimal balance between ionic-electronic coupling and charge mobility. Through the GOP-PPF, PMIECs can be tailored to access desirable performance metrics at the molecular level.

Recent progress on production technologies of food waste-based biochar and its fabrication method as electrode materials in energy storage application

The abundance of food waste across the globe has called for the mitigation and reduction of these discarded wastes. Herein, the potential of biochar derived from food waste is unquestionable as it provides a sustainable way of utilizing the abundance of available biomass, as well as an effective way of preserving the ecosystem through the reduction of concerning environmental issues. This review focuses on the food waste-based biochar as advanced electrode materials in the energy storage devices. Efforts have been made to present and discuss the current exploration of the food waste utilization, along with the biochar production technologies through thermochemical conversion, including combustion, gasification, and pyrolysis method. Finding its limitation in literatures, discussion on the food waste-based biochar fabrication method as the electrode materials is elaborated, alongside the current food waste-based biochar that has been explored in the energy application thus far. Towards the end, the outlook and perspective on the further development of food waste-based biochar have been outlined.

Food seasoning-derived gel polymer electrolyte and pulse-plasma exfoliated graphene nanosheet electrodes for symmetrical solid-state supercapacitors

Kitchen sea salt or table salt is used every day by cooks as a food seasoning. Here, it is introduced into a gel polymer (poly(vinyl) alcohol (PVA)-table salt) for use as an electrolyte, and an electrode was constructed from graphene nanosheets for use as symmetrical solid-state supercapacitors. The graphene sheets are prepared by a pulse control plasma method and used as an electrode material, and were studied by X-ray diffraction (XRD), Raman spectroscopy, as well as scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). A specific capacitance of 117.6 F g-1 at 5 mV s-1 was obtained in a three electrode system with table sea salt as an aqueous electrolyte. For a symmetrical solid-state supercapacitor: graphene/PVA-table sea salt/graphene gave a good specific capacitance of 31.67 F g-1 at 0.25 A g-1 with an energy density of 6.33 W h kg-1 at a power density of 600 W kg-1, with good charge-discharge stability, which was 87% after 8000 cycles. Thus, the development of table sea salt as an environmentally friendly electrolyte has a good potential for use in energy storage applications.

Recycling Black Tea Waste Biomass as Activated Porous Carbon for Long Life Cycle Supercapacitor Electrodes

Value creation through waste recycling is important for a sustainable society and future. In particular, biomass, which is based on crops, is a great recyclable resource that can be converted into useful materials. Black tea is one of the most cultivated agricultural products in the world and is mostly discarded after brewing. Herein, we report the application of black tea waste biomass as electrode material for supercapacitors through the activation of biomass hydrochar under various conditions. Raw black tea was converted into hydrochar via a hydrothermal carbonization process and then activated with potassium hydroxide (KOH) to provide a large surface area and porous structure. The activation temperature and ratio of KOH were controlled to synthesize the optimal black tea carbon (BTC) with a large surface area and porosity suitable for use as electrode material. This method suggests a direction in which the enormous amount of biomass, which is simply discarded, can be utilized in the energy storage system. The synthesized optimal BTC has a large surface area of 1062 m2 and specific capacitance up to 200 F∙g-1 at 1 mV∙s-1. Moreover, it has 98.8% retention of charge-discharge capacitance after 2000 cycles at the current density of 5 A∙g-1.

Current understanding in conversion and application of tea waste biomass: A review

Along with the increasing consumption of tea and its extracts, the amount of tea waste grows rapidly, which not only results in huge biomass loss, but also increases environmental stress. In past years, interest has been attracted on utilization of tea waste biomass, and a lot of work has been carried out. This review summarized the progress in conversion of tea waste by thermo-chemical and biological technologies and analyzed the property of the derived products and their performance in applications. It was found that biochar derived from tea waste had relatively large surface area, porous structures, and abundant functional groups, and could be used as bio-adsorbents and catalysts and electrochemical energy storage, while the cost of its largescale production should be evaluated. Profoundly, biological conversion, including ensiling and composting, was suggested to be an effective way to develop the tea waste biomass in practice due to its low-cost and specific functions.

Solventless synthesis of nanospinel Ni1−xCoxFe2O4 (0 ≤ x ≤ 1) solid solutions for efficient electrochemical water splitting and supercapacitance

The formation of solid solutions represents a robust strategy for modulating the electronic properties and improving the electrochemical performance of spinel ferrites. However, solid solutions have been predominantly prepared via wet chemical routes, which involve the use of harmful and/or expensive chemicals. In the present study, a facile, inexpensive and environmentally benign solventless route is employed for the composition-controlled synthesis of nanoscopic Ni_1−xCo_xFe₂O₄ (0 ≤ x ≤ 1) solid solutions. The physicochemical characterization of the samples was performed by p-XRD, SEM, EDX, XPS, TEM, HRTEM and UV-Vis techniques. A systematic investigation was also carried out to elucidate the electrochemical performance of the prepared nanospinels towards energy generation and storage. Based on the results of CV, GCD, and stability tests, the Ni_0.4Co_0.6Fe₂O₄ electrode showed the highest performance for the supercapacitor electrode exhibiting a specific capacitance of 237 F g⁻¹, superior energy density of 10.3 W h kg⁻¹ and a high power density with a peak value of 4208 W kg⁻¹, and 100% of its charge storage capacity was retained after 4000 cycles with 97% coulombic efficiency. For HER, the Ni_0.6Co_0.4Fe₂O₄ and CoFe₂O₄ electrodes showed low overpotentials of 168 and 169 mV, respectively, indicating better catalytic activity. For OER, the Ni_0.8Co_0.2Fe₂O₄ electrode exhibited a lower overpotential of 320 mV at a current density of 10 mA cm⁻², with a Tafel slope of 79 mV dec⁻¹, demonstrating a fast and efficient process. These results indicated that nanospinel ferrite solid solutions could be employed as promising electrode materials for supercapacitor and water splitting applications.

The formation of solid solutions represents a robust strategy for modulating the electronic properties and improving the electrochemical performance of spinel ferrites.

Hierarchical Doped Gelatin-Derived Carbon Aerogels: Three Levels of Porosity for Advanced Supercapacitors

Nitrogen-doped graphene-based aerogels with three levels of hierarchically organized pores were prepared via a simple environmentally friendly process, and successfully tested in supercapacitor applications. Mesopores and macropores were formed during the aerogel preparation followed by carbonization and its chemical activation by potassium hydroxide (KOH). These mesopores and macropores consist of amorphous carbon and a 3D graphene framework. Thermal treatment at 700 °C, 800 °C, 900 °C in N₂ atmosphere was done to etch out the amorphous carbon and obtain a stable N-doped 3D graphene. Specific capacitance values obtained from the electrochemical measurements are in the range of 232–170 F× g⁻¹. The thus fabricated structures showed excellent cyclic stability, suggesting that these materials have potential as electrodes for solid asymmetric supercapacitors.

Design of a high performance electrode composed of porous nickel–cobalt layered double hydroxide nanosheets supported on vertical graphene fibers for flexible supercapacitors

A flexible supercapacitor based on a NC-LDH/LIG composite with high electrochemical performance was prepared via a laser-induced technology.

Nanostructured Fe-Ni Sulfide: A Multifunctional Material for Energy Generation and Storage

Multifunctional materials for energy conversion and storage could act as a key solution for growing energy needs. In this study, we synthesized nanoflower-shaped iron-nickel sulfide (FeNiS) over a nickel foam (NF) substrate using a facile hydrothermal method. The FeNiS electrode showed a high catalytic performance with a low overpotential value of 246 mV for the oxygen evolution reaction (OER) to achieve a current density of 10 mA/cm2, while it required 208 mV at 10 mA/cm2 for the hydrogen evolution reaction (HER). The synthesized electrode exhibited a durable performance of up to 2000 cycles in stability and bending tests. The electrolyzer showed a lower cell potential requirement for a FeNiS-Pt/C system (1.54 V) compared to a standard benchmark IrO2-Pt/C system (1.56 V) to achieve a current density of 10 mA/cm2. Furthermore, the FeNiS electrode demonstrated promising charge storage capabilities with a high areal capacitance of 13.2 F/cm2. Our results suggest that FeNiS could be used for multifunctional energy applications such as energy generation (OER and HER) and storage (supercapacitor).

Structural Flexibility in Activated Carbon Materials Prepared under Harsh Activation Conditions

Although traditionally high-surface area carbon materials have been considered as rigid structures with a disordered three dimensional (3D) network of graphite microdomains associated with a limited electrical conductivity (highly depending on the porous structure and surface chemistry), here we show for the first time that this is not the case for activated carbon materials prepared using harsh activation conditions (e.g., KOH activation). In these specific samples a clear structural re-orientation can be observed upon adsorption of different organic molecules, the structural changes giving rise to important changes in the electrical resistivity of the material. Whereas short chain hydrocarbons and their derivatives give rise to an increased resistivity, the contrary occurs for longer-chain hydrocarbons and/or alcohols. The high sensitivity of these high-surface area carbon materials towards these organic molecules opens the gate towards their application for sensing devices.

Binder-Free Modification of a Glassy Carbon Electrode by Using Porous Carbon for Voltammetric Determination of Nitro Isomers

In this study, Liquidambar formosana tree leaves have been used as a renewable biomass precursor for preparing porous carbons (PCs). The PCs were produced by pyrolysis of natural waste of leaves after 10% KOH activation under a nitrogen atmosphere and characterized by a variety of state-of-the-art techniques. The PCs possess a large surface area, micro-/mesoporosity, and functional groups on its surface. A glassy carbon electrode modified with high PCs was explored as an efficient binder-free electrocatalyst material for the voltammetric determination of nitro isomers such as 3-nitroaniline (3-NA) and 4-nitroaniline (4-NA). Under optimal experimental conditions, the electrochemical detection of 3-NA and 4-NA was found to have a wide linear range of 0.2-115.6 and 0.5-120 μM and a low detection limit of 0.0551 and 0.0326 μM, respectively, with appreciable selectivity. This route not only enhanced the benefit from biomass wastes but also reduced the cost of producing electrode materials for electrochemical sensors. Additionally, the sensor was successfully applied in the determination of nitro isomers even in the presence of other common electroactive interference and real samples analysis (beverage and pineapple jam solutions). Therefore, the proposed method is simple, rapid, stable, sensitive, specific, reproducible, and cost-effective and can be applicable for real sample detection.

Electrochemical investigation of uncapped AgBiS2 (schapbachite) synthesized using in situ melts of xanthate precursors

In this study, a facile and potentially scalable synthesis of AgBiS2 (schapbachite) using melts of metal xanthates is presented; AgBiS2 is both a significant mineral and a technologically important material. This ternary material was synthesized by a novel and low-cost solventless route using simple ethyl xanthate complexes of silver and bismuth. p-XRD analysis indicates that the synthesized ternary material is highly crystalline and belongs to the cubic phase (schapbachite). The electrochemical properties of the material were tested; the potential of the synthesized material for application in charge storage shows a high specific capacitance of 460 F g-1 at 2 mV s-1. A capacitance retention of 83% with a 100% coulombic efficiency was observed after 3000 cycles. The charge storage potential, analysed by fabricating actual symmetrical devices, shows a specific capacitance of 14 F g-1 at 2 mV s-1. An energy density of 26 W h kg-1 and a power density of 3.6 kW kg-1 were observed. Besides, the potential for the oxygen evolution reaction was also studied. An overpotential of 414 mV and a Tafel slope of 134 mV dec-1 were obtained for water oxidation. The fabrication of an electrolyzer cell using the synthesized material as the cathode indicates that a current of 10 mA cm-2 can be achieved at a potential of 1.63 V.

Electrodeposited Nanostructured CoFe2O4 for Overall Water Splitting and Supercapacitor Applications

To contribute to solving global energy problems, a multifunctional CoFe2O4 spinel was synthesized and used as a catalyst for overall water splitting and as an electrode material for supercapacitors. The ultra-fast one-step electrodeposition of CoFe2O4 over conducting substrates provides an economic pathway to high-performance energy devices. Electrodeposited CoFe2O4 on Ni-foam showed a low overpotential of 270 mV and a Tafel slope of 31 mV/dec. The results indicated a higher conductivity for electrodeposited compared with dip-coated CoFe2O4 with enhanced device performance. Moreover, bending and chronoamperometry studies suggest excellent durability of the catalytic electrode for long-term use. The energy storage behavior of CoFe2O4 showed high specific capacitance of 768 F/g at a current density of 0.5 A/g and maintained about 80% retention after 10,000 cycles. These results demonstrate the competitiveness and multifunctional applicability of the CoFe2O4 spinel to be used for energy generation and storage devices.

Supercapacitor Energy Storage Device Using Biowastes: A Sustainable Approach to Green Energy

The demand for renewable energy sources worldwide has gained tremendous research attention over the past decades. Technologies such as wind and solar have been widely researched and reported in the literature. However, economical use of these technologies has not been widespread due partly to cost and the inability for service during of-source periods. To make these technologies more competitive, research into energy storage systems has intensified over the last few decades. The idea is to devise an energy storage system that allows for storage of electricity during lean hours at a relatively cheaper value and delivery later. Energy storage and delivery technologies such as supercapacitors can store and deliver energy at a very fast rate, offering high current in a short duration. The past decade has witnessed a rapid growth in research and development in supercapacitor technology. Several electrochemical properties of the electrode material and electrolyte have been reported in the literature. Supercapacitor electrode materials such as carbon and carbon-based materials have received increasing attention because of their high specific surface area, good electrical conductivity and excellent stability in harsh environments etc. In recent years, there has been an increasing interest in biomass-derived activated carbons as an electrode material for supercapacitor applications. The development of an alternative supercapacitor electrode material from biowaste serves two main purposes: (1) It helps with waste disposal; converting waste to a useful product, and (2) it provides an economic argument for the substantiality of supercapacitor technology. This article reviews recent developments in carbon and carbon-based materials derived from biowaste for supercapacitor technology. A comparison between the various storage mechanisms and electrochemical performance of electrodes derived from biowaste is presented.

Universal Nature-Inspired and Amine-Promoted Metallization for Flexible Electronics and Supercapacitors

Economical and abundant natural biological materials provide a low-cost and scalable approach to develop next-generation flexible and wearable electronics. Herein, a universal strategy of nature-inspired and amine-promoted metallization, namely, NIAPM, is presented to make high-quality metals for electronics fabrication. The introduction of poly(ethyleneimine) (PEI) significantly shortens the time of metallization from >48 h to ≈6 h, and the phenol compounds (TP) from green tea make metals bond tightly on all demonstrated surfaces. The as-made thin metal films of Cu and Ni feature high conductivity (∼1.0 Ω/□), excellent mechanical stability and flexibility even at the bending radius of ∼1 mm. Moreover, NIAPM is compatible with typical lithography techniques for fabricating metallic patterns, showing considerable potential applications in flexible electronics. As a proof-of-concept, two devices based on melamine-templated Cu sponges are first prepared for detecting the change of external pressure with a resistance sensitivity of 18.1 kPa^-1 and collecting high-viscosity crude oil, respectively. Then, a high-performance bendable solid supercapacitor is demonstrated using as-prepared Ni metallized fabrics and the activated porous carbon from the recycled waste in NIPAM as flexible electrodes, which possesses comparable areal capacitance of 45.5 F·g^-1, and energy density of 7.88 Wh·g^-1 at the power density of 35 W·g^-1. Therefore, it is anticipated that such a time-saving, cost-effective and whole solution-processed NIAPM strategy can inspire further practical applications in the fields of surface chemistry, material science, flexible and wearable electronics, etc.