Entropic Contributions to Protein Stability

Physical mechanisms of the Sec machinery operation

The Sec complex, composed of a motor protein SecA and a channel SecYEG, is an ATP-driven molecular machine for the transport of proteins across the plasma membrane in bacteria. Today, there is a consensus about a general "rough" model of the complex activation and operation, which, however, lacks understanding of the physical mechanisms behind it. Molecular dynamics simulations were employed to address a way of allosteric activation, conformational transition of SecYEG from the closed to the open state, and driving forces of protein transport. We found that binding of SecA (in the ATP-bound state) and the protein signal sequence leads to a transmembrane helix rearrangment that weakens contacts inside the hydrophobic core of SecYEG and provides a driving force for plug opening. The conformational transitions are enabled by a delicate interplay between hydrophobic forces on one side and PEES (proton motive force, external - due to binding with the translocation partners - entropic, and solvent-induced) on the other side. In the open state, SecYEG still provides a barrier for bulky residues that contributes to the driving forces of transport. Other important contributions come from SecA and the membrane potential acting in different stages of protein transport to guarantee a nearly constant driving force. Given that the different forces act on different types of residues, the suggested mechanisms taken together provide a directional motion for any substrate, thereby maximizing the efficiency of the Sec machinery.

Plasticity of the proteasome-targeting signal Fat10 enhances substrate degradation

The proteasome controls levels of most cellular proteins, and its activity is regulated under stress, quiescence, and inflammation. However, factors determining the proteasomal degradation rate remain poorly understood. Proteasome substrates are conjugated with small proteins (tags) like ubiquitin and Fat10 to target them to the proteasome. It is unclear if the structural plasticity of proteasome-targeting tags can influence substrate degradation. Fat10 is upregulated during inflammation, and its substrates undergo rapid proteasomal degradation. We report that the degradation rate of Fat10 substrates critically depends on the structural plasticity of Fat10. While the ubiquitin tag is recycled at the proteasome, Fat10 is degraded with the substrate. Our results suggest significantly lower thermodynamic stability and faster mechanical unfolding in Fat10 compared to ubiquitin. Long-range salt bridges are absent in the Fat10 structure, creating a plastic protein with partially unstructured regions suitable for proteasome engagement. Fat10 plasticity destabilizes substrates significantly and creates partially unstructured regions in the substrate to enhance degradation. NMR-relaxation-derived order parameters and temperature dependence of chemical shifts identify the Fat10-induced partially unstructured regions in the substrate, which correlated excellently to Fat10-substrate contacts, suggesting that the tag-substrate collision destabilizes the substrate. These results highlight a strong dependence of proteasomal degradation on the structural plasticity and thermodynamic properties of the proteasome-targeting tags.

Thermostabilizing mechanisms of canonical single amino acid substitutions at a GH1 β-glucosidase probed by multiple MD and computational approaches

β-glucosidases play a pivotal role in second-generation biofuel (2G-biofuel) production. For this application, thermostable enzymes are essential due to the denaturing conditions on the bioreactors. Random amino acid substitutions have originated new thermostable β-glucosidases, but without a clear understanding of their molecular mechanisms. Here, we probe by different molecular dynamics simulation approaches with distinct force fields and submitting the results to various computational analyses, the molecular bases of the thermostabilization of the Paenibacillus polymyxa GH1 β-glucosidase by two-point mutations E96K (TR1) and M416I (TR2). Equilibrium molecular dynamic simulations (eMD) at different temperatures, principal component analysis (PCA), virtual docking, metadynamics (MetaDy), accelerated molecular dynamics (aMD), Poisson-Boltzmann surface analysis, grid inhomogeneous solvation theory and colony method estimation of conformational entropy allow to converge to the idea that the stabilization carried by both substitutions depend on different contributions of three classic mechanisms: (i) electrostatic surface stabilization; (ii) efficient isolation of the hydrophobic core from the solvent, with energetic advantages at the solvation cap; (iii) higher distribution of the protein dynamics at the mobile active site loops than at the protein core, with functional and entropic advantages. Mechanisms i and ii predominate for TR1, while in TR2, mechanism iii is dominant. Loop A integrity and loops A, C, D, and E dynamics play critical roles in such mechanisms. Comparison of the dynamic and topological changes observed between the thermostable mutants and the wildtype protein with amino acid co-evolutive networks and thermostabilizing hotspots from the literature allow inferring that the mechanisms here recovered can be related to the thermostability obtained by different substitutions along the whole family GH1. We hope the results and insights discussed here can be helpful for future rational approaches to the engineering of optimized β-glucosidases for 2G-biofuel production for industry, biotechnology, and science.

Atomic Mechanisms of Transthyretin Tetramer Dissociation Studied by Molecular Dynamics Simulations

The dissociation of the transthyretin (TTR) tetramer into a monomer is closely related to various TTR amyloidoses in humans. While the tetramer dissociation has been reported to be the rate-limiting step for TTR aggregation, few details are known about the mechanism. Here, molecular dynamics (MD) simulations were performed by combining conventional MD and biased metadynamics to investigate the mechanism for the wild-type (WT) and mutant (T119M) structures. Both were found to have a great deal in common. Conventional MD simulations reveal that interfacial hydrophobic interactions contribute significantly to stabilize the tetramer. Interfacial residues including L17, V20, L110, and V121 with close contacts form a hydrophobic channel. Metadynamics simulations indicate that the mouth opening of the hydrophobic channel is the first and the most difficult step for dissociation. Interactions of V20 between opposing dimers lock four monomers into the tetramer, and disruption of the interactions is found to be involved in the final step. During the dissociation, an increasing extent of solvation was observed by calculating the radial distribution functions of water around interfacial hydrophobic residues, suggesting that water plays a role in driving the tetramer dissociation. Moreover, compared to T119, residue M119 has a longer side chain that extends into the hydrophobic channel, making solvation more difficult, consistent with a higher energy barrier for dissociation of the T119M tetramer. This result provides a good explanation for the protective role of the T119M mutation. Overall, this study can provide atomic-level insights to better understand the pathogenesis of TTR amyloidosis and guide rational drug design in the future.

Microsecond MD Simulations of the Plexin-B1 RBD: N-H Probability Density as Descriptor of Structural Dynamics, Dimerization-Related Conformational Entropy, and Transient Dimer Asymmetry

Amide-bond equilibrium probability density, P_eq = exp(-u) (u, local potential), and associated conformational entropy, S_k = -∫P_eq (ln P_eq) dΩ ─ln ∫dΩ, are derived for the Rho GTPase binding domain of Plexin-B1 (RBD) as monomer and dimer from 1 μs MD simulations. The objective is to elucidate the effect of dimerization on the dynamic structure of the RBD. Dispersed (peaked) P_eq functions indicate "flexibility" ("rigidity"; the respective concepts are used below in this context). The L1 and L3 loops are throughout highly flexible, the L2 loop and the secondary structure elements are generally rigid, and the L4 loop is flexible in the monomer and rigid in the dimer. Overall, many residues are more flexible in the dimer. These features, and their implications, are discussed. Unexpectedly, we find that monomer unit 1 of the dimer (in short, d1) is unusually flexible, whereas monomer unit 2 (in short, d2) is as rigid as the RBD monomer. This is revealed due to their engagement in slow-to-intermediate conformational exchange detected previously by ¹⁵N relaxation experiments. Such motions occur with rates on the order of 10³-10⁴ s^-1; hence, they cannot be completely sampled over the course of 1 μs simulation. However, the extent to which rigid d2 is affected is small enough to enable physically relevant analysis. The entropy difference between d2 and the monomer yields an entropic contribution of -7 ± 0.7 kJ/mol to the free energy of RBD dimerization. In previous work aimed at similar objectives we used 50-100 ns MD simulations. Those results and the present result differ considerably. In summary, bond-vector P_eq functions derived directly from long MD simulations are useful descriptors of protein structural dynamics and provide accurate conformational entropy. Within the scope of slow conformational exchange, they can be useful, even in the presence of incomplete sampling.

Exploring Glycan Binding Specificity of Odorranalectin by Alanine Scanning Library

Fluorescently labelled alanine scan analogues of odorranalectin (OL), a cyclic peptide that exhibits lectin like properties, were screened for binding BSA-conjugated monosaccharides using an enzyme-linked lectin assay (ELLA). Results revealed that Lys5, Phe7, Tyr9, Gly12, Leu14, and Thr17 were crucial for binding BSA-L-fucose, BSA-D-galactose and BSA-N-acetyl-D-galactosamine. Notably, Ala substitution of Ser3, Pro4, and Val13 resulted in higher binding affinities compared to the native OL. The obtained data also indicated that Arg8 plays an important role in differentiation of binding for BSA-L-fucose/D-galactose from BSA-N-acetyl-D-galactosamine. The thermodynamics of binding of the selected alanine analogues was evaluated by isothermal titration calorimetry. Low to moderate binding affinities were determined for the tetravalent MUC1 glycopeptide and asialofetuin, respectively, and high for the fucose rich polysaccharide, fucoidan. The thermodynamic profile of interactions with asialofetuin exhibits shift to an entropy-driven mechanism compared to the fucoidan, which displayed an enthalpyentropy compensation, typically associated with the carbohydratelectin recognition process.

Thermostability engineering of industrial enzymes through structure modification

Thermostability is an essential requirement of enzymes in the industrial processes to catalyze the reactions at high temperatures; thus, enzyme engineering through directed evolution, semi-rational design and rational design are commonly employed to construct desired thermostable mutants. Several strategies are implemented to fulfill enzymes' thermostability demand including decreasing the entropy of the unfolded state through substitutions Gly → Xxx or Xxx → Pro, hydrogen bond, salt bridge, introducing two different simultaneous interactions through single mutant, hydrophobic interaction, filling the hydrophobic cavity core, decreasing surface hydrophobicity, truncating loop, aromatic-aromatic interaction and introducing positively charged residues to enzyme surface. In the current review, horizons about compatibility between secondary structures and substitutions at preferable structural positions to generate the most desirable thermostability in industrial enzymes are broadened. KEY POINTS: • Protein engineering is a powerful tool for generating thermostable industrial enzymes. • Directed evolution and rational design are practical approaches in enzyme engineering. • Substitutions in preferable structural positions can increase thermostability.

Antifreeze Proteins: A Tale of Evolution From Origin to Energy Applications

Icing and formation of ice crystals is a major obstacle against applications ranging from energy systems to transportation and aviation. Icing not only introduces excess thermal resistance, but it also reduces the safety in operating systems. Many organisms living under harsh climate and subzero temperature conditions have developed extraordinary survival strategies to avoid or delay ice crystal formation. There are several types of antifreeze glycoproteins with ice-binding ability to hamper ice growth, ice nucleation, and recrystallization. Scientists adopted similar approaches to utilize a new generation of engineered antifreeze and ice-binding proteins as bio cryoprotective agents for preservation and industrial applications. There are numerous types of antifreeze proteins (AFPs) categorized according to their structures and functions. The main challenge in employing such biomolecules on industrial surfaces is the stabilization/coating with high efficiency. In this review, we discuss various classes of antifreeze proteins. Our particular focus is on the elaboration of potential industrial applications of anti-freeze polypeptides.

Double Mutant of Chymotrypsin Inhibitor 2 Stabilized through Increased Conformational Entropy

The conformational heterogeneity of a folded protein can affect not only its function but also stability and folding. We recently discovered and characterized a stabilized double mutant (L49I/I57V) of the protein CI2 and showed that state-of-the-art prediction methods could not predict the increased stability relative to the wild-type protein. Here, we have examined whether changed native-state dynamics, and resulting entropy changes, can explain the stability changes in the double mutant protein, as well as the two single mutant forms. We have combined NMR relaxation measurements of the ps-ns dynamics of amide groups in the backbone and the methyl groups in the side chains with molecular dynamics simulations to quantify the native-state dynamics. The NMR experiments reveal that the mutations have different effects on the conformational flexibility of CI2: a reduction in conformational dynamics (and entropy estimated from this) of the native state of the L49I variant correlates with its decreased stability, while increased dynamics of the I57V and L49I/I57V variants correlates with their increased stability. These findings suggest that explicitly accounting for changes in native-state entropy might be needed to improve the predictions of the effect of mutations on protein stability.