Two Decades of Chromatic Orthogonality

Colorful 3D Printing: A Critical Feasibility Analysis of Multi-Wavelength Additive Manufacturing

Employing two colors of light to 3D print objects holds potential for accessing advanced printing modes, such as the generation of multi-material objects from a single print. Thus, dual-wavelength-driven photoreactive systems (reactions that require or utilize two wavelengths) and their exploitation as chemo-technological solutions for additive manufacturing technologies have experienced considerable development over the last few years. Such systems saw an increase in printing speeds, a decrease in resolution thresholds, and─perhaps most importantly─the actual generation of multi-material objects. However, the pace at which such reactive systems are developed is moderate and varies significantly depending on the fashion in which the two colors of light are employed. Herein, we address for the first time the varying logic conjugations of light-activated chemical compounds in dual-wavelength photochemical processes in a systematic manner and consider their implications from a photochemical point of view. To date, four dual-wavelength reaction types have been reported, termed synergistic (λ1 AND λ2), antagonistic (reversed λ1 AND λ2), orthogonal (λ1 OR λ2), and─most recently─cooperative (λ1 AND λ2 or λ1 OR λ2). The progress of their implementation in additive manufacturing is assessed individually, and their concurrent and individual chemical challenges are identified. These challenges need to be addressed for future dual-wavelength photochemical systems to progress multi-wavelength additive manufacturing technologies beyond their current limitations.

Photocaging of Carboxylic Function Bearing Biomolecules by New Thiazole Derived Fluorophore

The design and synthesis of a new fluorophore containing an arylidene thiazole scaffold resulted in a compound with good photophysical characteristics. Furthermore, the thiazole C5-methyl group was easily modified into specific functional groups (CH2 Br and CH2 OH) for the formation of a series of photocourier molecules containing model compounds (benzoic acids), as well as prodrugs, including salicylic acid, caffeic acid, and chlorambucil via a "benzyl" linker. Spectral characteristics (1 H, 13 C NMR, and high-resolution mass spectra) corresponded to the proposed structures. The photocourier molecules demonstrated absorption with high values of coefficient of molar extinction, exhibited contrasting green emission, and showed good dark stability. The mechanism of the photorelease was investigated through spectral analysis, HPLC-HRMS, and supported by TD-DFT calculations. The photoheterolysis and elimination of carboxylic acids were proved to occur in the excited state, yielding a carbocation as an intermediate moiety. The fluorophore structure provided stability to the carbocation through the delocalization of the positive charge via resonance structures. Viability assessment of Vero cells using the MTT-test confirmed the weak cytotoxicity of prodrugs without irradiation and it increase upon UV-light.

Cooperative Network Formation via Two-Colour Light-Activated λ-Orthogonal Chromophores

Independently addressing photoreactive sites within one molecule with two colours of light is a formidable challenge. Here, we combine two sequence independent λ-orthogonal chromophores in one heterotelechelic dilinker molecule, to exploit their disparate reactivity utilizing the same reaction partner, a maleimide-containing polymer. We demonstrate that polymer network formation only proceeds if two colours of light are employed. Upon single colour irradiation, linker-decorated post-functionalized polymers are generated at either wavelength and in either sequence. Network formation, however, is only achieved by sequential or simultaneous two colour irradiation. The herein introduced photoreactive system demonstrates the power of wavelength orthogonal chemistry in macromolecular synthesis.

meso-Methyl BODIPY Photocages: Mechanisms, Photochemical Properties, and Applications

meso-methyl BODIPY photocages have recently emerged as an exciting new class of photoremovable protecting groups (PPGs) that release leaving groups upon absorption of visible to near-infrared light. In this Perspective, we summarize the development of these PPGs and highlight their critical photochemical properties and applications. We discuss the absorption properties of the BODIPY PPGs, structure-photoreactivity studies, insights into the photoreaction mechanism, the scope of functional groups that can be caged, the chemical synthesis of these structures, and how substituents can alter the water solubility of the PPG and direct the PPG into specific subcellular compartments. Applications that exploit the unique optical and photochemical properties of BODIPY PPGs are also discussed, from wavelength-selective photoactivation to biological studies to photoresponsive organic materials and photomedicine.

Chromatic Selectivity of Coumarin-Caged Oligonucleotides

A system of two coumarin-based caging groups is presented - one absorbing in the blue (400-450 nm) and the other absorbing in the green (480-550 nm) part of the visible spectrum. Together they form a pair, which allows to selectively photoactivate the one or the other in oligonucleotides. A numerical characterization defining the term "chromatic selectivity" was proposed, and it was shown how chromatically selective uncaging can literally be titrated in a kinetic reaction scheme.

Chromo-Orthogonal Deprotection of Carboxylic Acids by Aminonaphthalene and Aminoaniline Photocages

Photoremovable protecting groups (photocages) 6b-6i based on 1-amino-2-hydroxymethylnaphthalene were developed, and their applicability to release alcohols and carboxylic acids in photohydrolysis was investigated. Compound 6b cannot release alcohol since N-demethylation takes place instead. However, the photorelease of carboxylic acids from 6c-6i was demonstrated on caged substrates, including some nonsteroidal drugs and a neurotransmitter. A simultaneous use of aniline and aminonaphthalene cages allows for the chromatic orthogonality and selective deprotection by UV-B or near-visible and UV-A light, respectively. The photochemical reaction mechanism of decaging was investigated by fluorescence measurements and laser flash photolysis, indicating that the heterolysis and elimination of carboxylic acids take place in the singlet excited state, delivering carbocation as an intermediate. The photoheterolysis in the singlet excited state, which directly releases caged substrates, is highly applicable for the photocages and has advantages compared to hitherto used nitrobenzyl derivatives.

Wavelength-Resolved PhotoATRP

The careful mapping of photoinduced reversible-deactivation radical polymerizations (RDRP) is a prerequisite for their applications in soft matter materials design. Here, we probe the wavelength-dependent behavior of photochemically induced atom transfer radical polymerization (ATRP) using nanosecond pulsed-laser polymerization (PLP). The photochemical reactivities at identical photon fluxes of methyl acrylate in terms of conversion, number-average molecular weight, and dispersity of the resulting polymers are mapped against the absorption spectrum of the copper(II) catalyst in the range of 305-550 nm. We observe a red shift of the action spectrum relative to the absorption spectrum of the copper(II) catalyst. Both the number-average molecular weight and the dispersity show a wavelength dependence, while the molecular weight and conversion remain linearly correlated. The reported data allow the judicious selection of optimum wavelengths for photoATRP.

3,3',5,5'-Tetramethoxybenzoin: a forgotten photolabile protecting group

Although reported several decades ago, 3,3',5,5'-tetramethoxybenzoin esters have not been used as a common photolabile protecting group, contrary to their unsymmetrical 3',5'-dimethoxybenzoin analogues. While the properties of the latter are superior, their tedious synthesis and chemical instability represent a drawback. In this article, we describe a reliable synthetic access to the symmetrical tetramethoxybenzoin derivatives, and show that their photochemical behaviour remain interesting, in particular chromatically orthogonality with respect to nitroveratryl esters.

Sequence-independent activation of photocycloadditions using two colours of light

We exploit two reactive chromophores to establish sequence-independent photochemical activation, employing ortho-methyl benzaldehyde (oMBA) and N,N-(dimethylamino)pyrene aryl tetrazole (APAT) with N-(2-hydroxy)ethyl maleimide (NHEM), without any additives. Critically, the order of the irradiation sequence is irrelevant, as the shorter wavelength does not activate the higher wavelength activated species. Therefore, full sequence-independent λ-orthogonality is achieved through differences in both the reaction quantum yields (Φ r,oMBA and Φ r,APAT) and wavelength-dependent reactivity profiles of the employed chromophores.

Action Plots in Action: In-Depth Insights into Photochemical Reactivity

Predicting wavelength-dependent photochemical reactivity is challenging. Herein, we revive the well-established tool of measuring action spectra and adapt the technique to map wavelength-resolved covalent bond formation and cleavage in what we term "photochemical action plots". Underpinned by tunable lasers, which allow excitation of molecules with near-perfect wavelength precision, the photoinduced reactivity of several reaction classes have been mapped in detail. These include photoinduced cycloadditions and bond formation based on photochemically generated o-quinodimethanes and 1,3-dipoles such as nitrile imines as well as radical photoinitiator cleavage. Organized by reaction class, these data demonstrate that UV/vis spectra fail to act as a predictor for photochemical reactivity at a given wavelength in most of the examined reactions, with the photochemical reactivity being strongly red shifted in comparison to the absorption spectrum. We provide an encompassing perspective of the power of photochemical action plots for bond-forming reactions and their emerging applications in the design of wavelength-selective photoresists and photoresponsive soft-matter materials.