Triethylene glycol HO(CH2CH2O)3H

A PVP-stabilized cerium oxide-platinum nanocomposite synthesized in TEG: pro-/antioxidant activities

Cerium oxide nanoparticles (CeNPs) represent a highly promising material for a number of chemical and biological applications involving oxidation-reduction processes. However, the impact of synthesis conditions, as well as the incorporation of synergistic agents of a different catalytic nature, on the antioxidant or prooxidant properties of CeNPs remains a subject of ongoing investigation. In this study, non-stoichiometric CeNPs (∼10% Ce3+) stabilized by polyvinylpyrrolidone (PVP) were synthesized through the thermal autoxidative decomposition of cerium(iii) nitrate in a high-boiling glycol. A novel approach for the synthesis of CeNPs in the absence of additives (PVP-CeNPs) and with platinum (PVP-CeNPs-Pt), followed by the formation of platinum nanoparticles (PVP-PtNPs), was employed in a stepwise one-pot process. In chemical tests, the PVP-CeNPs-Pt nanocomposite exhibited enhanced peroxidase-mimicking activity and accelerated the Fenton-type reaction of dye decolorization. Nevertheless, it was found to have the ability to reduce adrenaline autoxidation via the superoxide dismutase-mimicking pathway. In vitro studies demonstrated that PVP-CeNPs and PVP-CeNPs-Pt enhanced H2O2-induced oxytosis while restoring cellular metabolic activity inhibited by the Fenton-like pathway of cellular apoptosis (ferroptosis) initiated by sulfasalazine. The authors suggest that the oxidoreductase activity of CeNP-based systems in the chemical tests and in biological processes in vitro may be caused by different mechanisms, which are discussed.

Unexpected concentration dependence of the mass accommodation coefficient of water on aqueous triethylene glycol droplets

The mass accommodation coefficient αM of water on aqueous triethylene glycol droplets was determined for water mole fractions in the range xmol = 0.1-0.93 and temperatures between 21 and 26 °C from modulated Mie scattering measurement on single optically-trapped droplets in combination with a kinetic multilayer model. αM reaches minimum values around 0.005 at a critical water concentration of xmol = 0.38, and increases with decreasing water content to a value of ≈0.1 for almost pure triethylene glycol droplets, essentially independent of the temperature. Above xmol = 0.38, αM first increases with increasing water content and then stabilises at a value of ≈0.1 at the lowest temperatures, while at the highest temperature its value remains around 0.005. We analysed the unexpected concentration and temperature dependence with a previously proposed two-step model for mass accommodation which provides concentration and temperature-dependent activation enthalpies and entropies. We suggest that the unexpected minimum in αM at intermediate water concentrations might arise from a more or less saturated hydrogen-bond network that forms at the droplet surface.

Impact of test methodology on the efficacy of triethylene glycol (Grignard Pure) against bacteriophage MS2

The COVID-19 pandemic has raised interest in using chemical air treatments as part of a strategy to reduce the risk of disease transmission, but more information is needed to characterize their efficacy at scales translatable to applied settings and to develop standardized test methods for characterizing the performance of these products. Grignard Pure, a triethylene glycol (TEG) active ingredient air treatment, was evaluated using two different test protocols in a large bioaerosol test chamber and observed to inactivate bacteriophage MS2 in air (up to 99.9% at 90 min) and on surfaces (up to 99% at 90 min) at a concentration of approximately 1.2 - 1.5 mg/m3. Introducing bioaerosol into a TEG-charged chamber led to overall greater reductions compared to when TEG was introduced into a bioaerosol-charged chamber, although the differences in efficacy against airborne MS2 were only significant in the first 15 min. Time-matched control conditions (no TEG present) and replicate tests for each condition were essential for characterizing treatment efficacy. These findings suggest that chemical air treatments could be effective in reducing the air and surface concentrations of infectious pathogens in occupied spaces, although standard methods are needed for evaluating their efficacy and comparing results across studies. The potential health impacts of chronic exposure to chemicals should also be considered, but those were not evaluated here.

Unintended Consequences of Air Cleaning Chemistry

Amplified interest in maintaining clean indoor air associated with the airborne transmission risks of SARS-CoV-2 have led to an expansion in the market for commercially available air cleaning systems. While the optimal way to mitigate indoor air pollutants or contaminants is to control (remove) the source, air cleaners are a tool for use when absolute source control is not possible. Interventions for indoor air quality management include physical removal of pollutants through ventilation or collection on filters and sorbent materials, along with chemically reactive processes that transform pollutants or seek to deactivate biological entities. This perspective intends to highlight the perhaps unintended consequences of various air cleaning approaches via indoor air chemistry. Introduction of new chemical agents or reactive processes can initiate complex chemistry that results in the release of reactive intermediates and/or byproducts into the indoor environment. Since air cleaning systems are often continuously running to maximize their effectiveness and most people spend a vast majority of their time indoors, human exposure to both primary and secondary products from air cleaners may represent significant exposure risk. This Perspective highlights the need for further study of chemically reactive air cleaning and disinfection methods before broader adoption.

Polymer-free corticosteroid dimer implants for controlled and sustained drug delivery

Polymeric drug carriers are widely used for providing temporal and/or spatial control of drug delivery, with corticosteroids being one class of drugs that have benefitted from their use for the treatment of inflammatory-mediated conditions. However, these polymer-based systems often have limited drug-loading capacity, suboptimal release kinetics, and/or promote adverse inflammatory responses. This manuscript investigates and describes a strategy for achieving controlled delivery of corticosteroids, based on a discovery that low molecular weight corticosteroid dimers can be processed into drug delivery implant materials using a broad range of established fabrication methods, without the use of polymers or excipients. These implants undergo surface erosion, achieving tightly controlled and reproducible drug release kinetics in vitro. As an example, when used as ocular implants in rats, a dexamethasone dimer implant is shown to effectively inhibit inflammation induced by lipopolysaccharide. In a rabbit model, dexamethasone dimer intravitreal implants demonstrate predictable pharmacokinetics and significantly extend drug release duration and efficacy (>6 months) compared to a leading commercial polymeric dexamethasone-releasing implant.

Inhalation toxicity of benzalkonium chloride and triethylene glycol mixture in rats

Benzalkonium chloride (BAC), a disinfectant, and triethylene glycol (TEG), an organic solvent/sanitizer, are frequently combined in commercially available household sprays. To assess the respiratory effect of this combination, Sprague-Dawley rats were exposed to an aerosol containing BAC (0.5%, w/v) and TEG (10%, w/v) for up to 2 weeks in a whole-body inhalation chamber. BAC (4.1-4.5 mg/m³, sprayed from 0.5% solution) promoted pulmonary cell damage and inflammation as depicted by the increase in total protein, lactate dehydrogenase, polymorphonuclear leukocytes, and macrophage inflammatory protein-2 in the bronchoalveolar lavage fluid, whereas TEG (85.3-94.5 mg/m³, sprayed from 10% solution) did not affect the lung. Rats exposed to the BAC/TEG mixture for 2 weeks showed severe respiratory symptoms (sneezing, wheezing, breath shortness, and chest tightness), but no lung damage or inflammation was observed. However, significant ulceration and degenerative necrosis were observed in the nasal cavities of rats repeatedly exposed to the BAC/TEG mixture. The mass median aerodynamic diameters of the aqueous, BAC, TEG and BAC/TEG aerosols were 1.24, 1.27, 3.11 and 3.24 μm, respectively, indicating that TEG-containing aerosols have larger particles than those of the aqueous and BAC alone aerosols. These results suggest that the toxic effects of BAC and BAC/TEG aerosols on the different respiratory organs may be associated with the difference in particle diameter, since particle size is important in determining the deposition site of inhaled materials.

Evaluation of pulmonary toxicity of benzalkonium chloride and triethylene glycol mixtures using in vitro and in vivo systems

Benzalkonium chloride (BAC) is a widely used disinfectant/preservative, and respiratory exposure to this compound has been reported to be highly toxic. Spray-form household products have been known to contain BAC together with triethylene glycol (TEG) in their solutions. The purpose of this study was to estimate the toxicity of BAC and TEG mixtures to pulmonary organs using in vitro and in vivo experiments. Human alveolar epithelial (A549) cells incubated with BAC (1-10 μg/mL) for 24 hours showed significant cytotoxicity, while TEG (up to 1000 μg/mL) did not affect cell viability. However, TEG in combination with BAC aggravated cell damage and inhibited colony formation as compared to BAC alone. TEG also exacerbated BAC-promoted production of reactive oxygen species (ROS) and reduction of glutathione (GSH) level in A549 cells. However, pretreatment of the cells with N-acetylcysteine (NAC) alleviated the cytotoxicity, indicating oxidative stress could be a mechanism of the toxicity. Quantification of intracellular BAC by LC/MS/MS showed that cellular distribution/absorption of BAC was enhanced in A549 cells when it was exposed together with TEG. Intratracheal instillation of BAC (400 μg/kg) in rats was toxic to the pulmonary tissues while that of TEG (up to 1000 μg/kg) did not show any harmful effect. A combination of nontoxic doses of BAC (200 μg/kg) and TEG (1000 μg/kg) promoted significant lung injury in rats, as shown by increased protein content and lactate dehydrogenase (LDH) activity in bronchoalveolar lavage fluids (BALF). Moreover, BAC/TEG mixture recruited inflammatory cells, polymorphonuclear leukocytes (PMNs), in terminal bronchioles and elevated cytokine levels, tumor necrosis factor α (TNF-α), and interleukin 6 (IL-6) in BALF. These results suggest that TEG can potentiate BAC-induced pulmonary toxicity and inflammation, and thus respiratory exposure to the air mist from spray-form products containing this chemical combination is potentially harmful to humans.

Identification and Functional Characterization of Anti-metastasis and Anti-angiogenic Activities of Triethylene Glycol Derivatives

We had previously reported anticancer activity in the water extract (WEX) of Ashwagandha leaves, and identified Triethylene glycol (TEG) as an active tumor suppressor component. In this study, we investigated anti-migratory and anti-angiogenesis activities of WEX and TEG. We conducted in vitro and in vivo experiments using TEG, and its two derivatives, Triethyleneglycol dimethacrylate (TD-10), and Tetraethyleneglycol dimethacrylate (TD-11). The data revealed strong anticancer and anti-metastasis potentials in the derivatives. Non-toxic, anti-migratory doses of the derivatives showed inhibition of canonical Wnt/β-catenin axis and consequent downregulation of EMT-signaling proteins (Vimentin, MMPs and VEGF). These results endorse that the TD-10 and TD-11 have potential to safely put a check on the aggressiveness of the metastatic cells and therefore represent promising candidates for the treatment of metastatic cancers.

Oxygenated Volatile Organic Compounds (Anti-freezing Agents) in Decorative Water-based Paints Marketed in Nigeria

BACKGROUND

Consumer products such as paints are a potentially significant source of volatile organic compounds (VOCs) and oxygenated VOCs. Paints for construction and household use have been rapidly changing from oil-based to water-based paints and are one of the commonly identified sources of oxygenated VOCs in indoor environments.

OBJECTIVES

Four different anti-freezing agents were identified and analyzed in 174 waterbased paint samples, purchased from popular paint markets in two metropolitan cities in Nigeria, Lagos and Ibadan.

METHODS

Paint samples were solvent extracted using acetonitrile and milli-Q water. Antifreezing agents in the extracts were identified and quantified using gas chromatography (GC)-mass spectrometry and a GC-flame ionization detector, respectively.

DISCUSSION

Four different anti-freezing agents were identified in the samples, ethylene glycol, diethylene glycol, triethylene glycol and propylene glycol. Their levels ranged from 1,000-1,980 ppm, diethylene glycol; 1,000-3,900 ppm, triethylene glycol; 1,090-2,510 ppm, propylene glycol and 1,350-2,710 ppm, ethylene glycol. Levels of anti-freezing agents in all of the paint samples were above the permissible limits of the European Union for VOCs in paints of 500 ppm. Results of multivariate statistical analyses clearly showed that triethylene glycol was the most commonly used anti-freezing agent in paints despite its numerous harmful health effects.

CONCLUSIONS

We concluded that water-based paints marketed in Nigeria contain high concentrations of anti-freezing agents, which have harmful environmental and human health effects, especially to sensitive individuals such as children.

COMPETING INTERESTS

The authors declare no competing financial interests.

A toxicological review of the ethylene glycol series: Commonalities and differences in toxicity and modes of action

This review summarizes the hazards, exposure and risk that are associated with ethylene glycols (EGs) in their intended applications. Ethylene glycol (EG; CAS RN 107-21-1) and its related oligomers include mono-, di-, tri-, tetra-, and penta-EG. All of the EGs are quickly and extensively absorbed following ingestion and inhalation, but not by the dermal route. Metabolism involves oxidation to the mono- and dicarboxylic acids. Elimination is primarily through the urine as the parent compound or the monoacid, and, in the case of EG, also as exhaled carbon dioxide. All EGs exert acute toxicity in a similar manner, characterized by CNS depression and metabolic acidosis in humans and rodents; the larger molecules being proportionally less acutely toxic on a strict mg/kg basis. Species differences exist in the metabolism and distribution of toxic metabolites, particularly with the formation of glycolic acids and oxalates (OX) from EG and diethylene glycol (DEG); OX are not formed to a significant degree in higher ethylene glycols. Among rodents, rats are more sensitive than mice, and males more sensitive than females to the acute and repeated-dose toxicity of EG. The metabolic formation of glycolic acid (GA), diglycolic acid (DGA), and OX are associated with nephrotoxicity in humans and rodents following single and repeated exposures. However, physiological and metabolic differences in the rate of formation of GA, DGA and OX and their distribution result in EG and DEG causing embryotoxicity in rats, but not rabbits. This rodent-specific sensitivity indicates that EG and its higher oligomers are not anticipated to be embryotoxic in humans at environmentally relevant doses. None of the compounds present developmental toxicity concerns at doses that do not also cause significant maternal toxicity, nor do any of the EGs cause adverse effects on fertility. The EGs are neither genotoxic nor carcinogenic. A read-across matrix is presented, which considers the common and distinct toxicological properties of each compound. It is concluded that EGs pose no risk to human health as a result of their intended use patterns.

Triethylene glycol, an active component of Ashwagandha (Withania somnifera) leaves, is responsible for sleep induction

Insomnia is the most common sleep complaint which occurs due to difficulty in falling asleep or maintaining it. Most of currently available drugs for insomnia develop dependency and/or adverse effects. Hence natural therapies could be an alternative choice of treatment for insomnia. The root or whole plant extract of Ashwagandha (Withania somnifera) has been used to induce sleep in Indian system of traditional home medicine, Ayurveda. However, its active somnogenic components remain unidentified. We investigated the effect of various components of Ashwagandha leaf on sleep regulation by oral administration in mice. We found that the alcoholic extract that contained high amount of active withanolides was ineffective to induce sleep in mice. However, the water extract which contain triethylene glycol as a major component induced significant amount of non-rapid eye movement sleep with slight change in rapid eye movement sleep. Commercially available triethylene glycol also increased non-rapid eye movement sleep in mice in a dose-dependent (10–30 mg/mouse) manner. These results clearly demonstrated that triethylene glycol is an active sleep-inducing component of Ashwagandha leaves and could potentially be useful for insomnia therapy.

Triethylene Glycol Up-Regulates Virulence-Associated Genes and Proteins in Streptococcus mutans

Triethylene glycol dimethacrylate (TEGDMA) is a diluent monomer used pervasively in dental composite resins. Through hydrolytic degradation of the composites in the oral cavity it yields a hydrophilic biodegradation product, triethylene glycol (TEG), which has been shown to promote the growth of Streptococcus mutans, a dominant cariogenic bacterium. Previously it was shown that TEG up-regulated gtfB, an important gene contributing to polysaccharide synthesis function in biofilms. However, molecular mechanisms related to TEG’s effect on bacterial function remained poorly understood. In the present study, S. mutans UA159 was incubated with clinically relevant concentrations of TEG at pH 5.5 and 7.0. Quantitative real-time PCR, proteomics analysis, and glucosyltransferase enzyme (GTF) activity measurements were employed to identify the bacterial phenotypic response to TEG. A S. mutans vicK isogenic mutant (SMΔvicK1) and its associated complemented strain (SMΔvicK1C), an important regulatory gene for biofilm-associated genes, were used to determine if this signaling pathway was involved in modulation of the S. mutans virulence-associated genes. Extracted proteins from S. mutans biofilms grown in the presence and absence of TEG were subjected to mass spectrometry for protein identification, characterization and quantification. TEG up-regulated gtfB/C, gbpB, comC, comD and comE more significantly in biofilms at cariogenic pH (5.5) and defined concentrations. Differential response of the vicK knock-out (SMΔvicK1) and complemented strains (SMΔvicK1C) implicated this signalling pathway in TEG-modulated cellular responses. TEG resulted in increased GTF enzyme activity, responsible for synthesizing insoluble glucans involved in the formation of cariogenic biofilms. As well, TEG increased protein abundance related to biofilm formation, carbohydrate transport, acid tolerance, and stress-response. Proteomics data was consistent with gene expression findings for the selected genes. These findings demonstrate a mechanistic pathway by which TEG derived from commercial resin materials in the oral cavity promote S. mutans pathogenicity, which is typically associated with secondary caries.

Cryoprotectant Toxicity: Facts, Issues, and Questions

High levels of penetrating cryoprotectants (CPAs) can eliminate ice formation during cryopreservation of cells, tissues, and organs to cryogenic temperatures. But CPAs become increasingly toxic as concentration increases. Many strategies have been attempted to overcome the problem of eliminating ice while minimizing toxicity, such as attempting to optimize cooling and warming rates, or attempting to optimize time of adding individual CPAs during cooling. Because strategies currently used are not adequate, CPA toxicity remains the greatest obstacle to cryopreservation. CPA toxicity stands in the way of cryogenic cryopreservation of human organs, a procedure that has the potential to save many lives. This review attempts to describe what is known about CPA toxicity, theories of CPA toxicity, and strategies to reduce CPA toxicity. Critical analysis and suggestions are also included.

Diethylene glycol in health products sold over-the-counter and imported from Asian countries

Diethylene glycol (DEG), a chemical that has been implicated in multiple medication-associated mass poisonings, can result in renal and neurological toxicity if ingested. Three previous such mass poisonings implicated Chinese manufacturers as the origin of contaminated ingredients. No literature exists on potential DEG or triethylene glycol (TEG), a related compound, contamination of health products imported from Asian countries to the USA. Our primary objective was to quantitatively assess the amount of DEG present in a convenience sampling of these health products. The study's secondary objectives were to: (1) evaluate for, and quantify TEG levels in these samples; (2) compare DEG and TEG levels in these products directly to levels in medications implicated in previous similar mass poisonings; and (3) to estimate DEG dose (in mg/kg) based on the manufacturer's instructions and compare these values to toxic doses from past mass poisonings and the literature. A quantitative assessment of DEG and TEG was performed in a convenience sampling of over-the-counter health products imported from Asian countries. Results were converted to volume to volume (v/v) % and compared with DEG levels in medications implicated in previous mass poisonings. Estimated doses (based on the manufacturer's instructions) of each product with detectable levels of DEG for a 70 kg adult were compared to toxic doses of DEG reported in the literature. Seventeen of 85 (20%) samples were not able to be analyzed for DEG or TEG due to technical reasons. Fifteen of 68 (22%) samples successfully tested had detectable levels of DEG (mean, 18.8 μg/ml; range, 0.791-110.1 μg/ml; and volume to volume (v/v) range, 0.00007-0.01%). Two of 68 (3%) samples had TEG levels of 12.8 and 20.2 μg/ml or 0.0012% and 0.0018% TEG v/v. The product with the highest DEG% by v/v was 810 times less than the product involved in the Panama DEG mass poisoning (8.1%). The lowest reported toxic dose from a past DEG mass poisoning (14 mg/kg) was more than 150 times higher than the highest daily dose estimated in our study (0.09 mg/kg). Sixty-eight of 85 (80%) samples were able to be successfully analyzed for DEG and TEG. DEG and TEG were detectable in 15/68 (22%) and 2/68 (3%) samples, respectively. Based on current standards, these levels probably do not represent an acute public health threat. Additional research focusing on why DEG is found in these products and on the minimum amount of DEG needed to result in toxicity is needed.