Effects of DMAEMA and 4-methoxyphenol on gingival fibroblast growth, metabolism, and response to interleukin-1

Biomaterials and Clinical Applications of Customized Healing Abutment-A Narrative Review

Customized healing abutments have been introduced in clinical practice along with implant surgery to preserve or create natural-appearing hard and soft tissue around the implant. This provides the benefits of reducing the overall treatment time by eliminating the second stage and reducing the elapsed time of the fabrication of the final prostheses. This article aims to review the types and properties of materials used for the fabrication of customized healing abutments and their clinical applications. Articles published in English on customized healing abutments were searched in Google Scholar, PubMed/MEDLINE, ScienceDirect, and the Scopus databases up to August 2022. The relevant articles were selected and included in this literature review. Customized healing abutments can be fabricated from materials available for dental implants, including PEEK, PMMA, zirconia, resin composite, and titanium. All the materials can be used following both immediate and delayed implant placement. Each material provides different mechanical and biological properties that influence the peri-implant tissues. In conclusion, the studies have demonstrated promising outcomes for all the materials. However, further investigation comparing the effects of each material on peri-implant soft and hard tissues is required.

Chronic exposure to the star polycation (SPc) nanocarrier in the larval stage adversely impairs life history traits in Drosophila melanogaster

BACKGROUND

Nanomaterials are widely used as pesticide adjuvants to increase pesticide efficiency and minimize environmental pollution. But it is increasingly recognized that nanocarrier is a double-edged sword, as nanoparticles are emerging as new environmental pollutants. This study aimed to determine the biotoxicity of a widely applied star polycation (SPc) nanocarrier using Drosophila melanogaster, the fruit fly, as an in vivo model.

RESULTS

The lethal concentration 50 (LC₅₀) value of SPc was identified as 2.14 g/L toward third-instar larvae and 26.33 g/L for adults. Chronic exposure to a sub lethal concentration of SPc (1 g/L) in the larval stage showed long-lasting adverse effects on key life history traits. Exposure to SPc at larval stage adversely impacted the lifespan, fertility, climbing ability as well as stresses resistance of emerged adults. RNA-sequencing analysis found that SPc resulted in aberrant expression of genes involved in metabolism, innate immunity, stress response and hormone production in the larvae. Orally administrated SPc nanoparticles were mainly accumulated in intestine cells, while systemic responses were observed.

CONCLUSIONS

These findings indicate that SPc nanoparticles are hazardous to fruit flies at multiple levels, which could help us to develop guidelines for further large-scale application.

Degradation and Stabilization of Resin-Dentine Interfaces in Polymeric Dental Adhesives: An Updated Review

Instability of the dentine-resin interface is owed to the partial/incomplete penetration of the resin adhesives in the collagen fibrils. However, interfacial hydrolysis of the resin-matrix hybrid layer complex activates the collagenolytic and esterase enzymes that cause the degradation of the hybrid layer. Adequate hybridization is often prevented due to the water trapped between the interfibrillar spaces of the collagen network. Cyclic fatigue rupture and denaturation of the exposed collagen fibrils have been observed on repeated application of masticatory forces. To prevent interfacial microstructure, various approaches have been explored. Techniques that stabilize the resin–dentine bond have utilized endogenous proteases inhibitors, cross linking agents’ incorporation in the exposed collagen fibrils, an adhesive system free of water, and methods to increase the monomer penetration into the adhesives interface. Therefore, it is important to discover and analyze the causes of interfacial degradation and discover methods to stabilize the hybrid layer to execute new technique and materials. To achieve a predictable and durable adhesive resin, restoration is a solution to the many clinical problems arising due to microleakage, loss of integrity of the restoration, secondary caries, and postoperative sensitivity. To enhance the longevity of the resin-dentine bond strength, several experimental strategies have been carried out to improve the resistance to enzymatic degradation by inhibiting intrinsic collagenolytic activity. In addition, biomimetic remineralization research has advanced considerably to contemporary approaches of both intrafibrillar and extrafibrillar remineralization of dental hard tissues. Thus, in the presence of biomimetic analog complete remineralization of collagen, fibers are identified.

Delta-sleep inducing peptide entrapment in the charged macroporous matrices

Various biomolecules, for example proteins, peptides etc., entrapped in polymer matrices, impact interactions between matrix and cells, including stimulation of cell adhesion and proliferation. Delta-sleep inducing peptide (DSIP) possesses numerous beneficial properties, including its abilities in burn treatment and neuronal protection. DSIP entrapment in two macroporous polymer matrices based on copolymer of dimethylaminoethyl methacrylate and methylen-bis-acrylamide (Co-DMAEMA-MBAA) and copolymer of acrylic acid and methylen-bis-acrylamide (Co-AA-MBAA) has been studied. Quite 100% of DSIP has been entrapped into positively charged Co-DMAEMA-MBAA matrix, while the quantity of DSIP adsorbed on negatively charged Co-AA-MBAA was only 2-6%. DSIP release from Co-DMAEMA-MBAA was observed in saline solutions (0.9% NaCl and PBS) while there was no DSIP release in water or 25% ethanol, thus ionic strength was a reason of this process.

Identification of regulatory Hck and PAI-2 proteins in the monocyte response to PEG-containing matrices

Mass spectrometry is a powerful proteomic tool enabling researchers to survey the global proteome of a cell. This technique has only recently been employed to investigate cell-material interactions. We had previously identified material scarcity and limited adherent cells as challenges facing mass spectrometric analysis of cell-material interactions. U937 adherent to tissue culture poly(styrene) was used as a model system for identifying proteins expressed by adherent monocytes and analyzed by HPLC coupled offline to MALDI-ToF/ToF (LC-MALDI). We identified 645 proteins from two cation fractions of crude U937 monocyte cell lysate. Forty three proteins of interest from the 645 were chosen based on literature searches for relevance to monocyte-material inflammation and wound healing. Proteins such as 40S ribosomal protein S19 and tyrosyl tRNA synthetase highlight the ability of LC-MALDI to identify proteins relevant to monocyte-material interactions that are currently unexplored. We used PEG-based semi-interpenetrating polymer networks and PEG-only hydrogels to investigate surface dependent effects on the Src family kinase Hck and plasminogen activator inhibitor-2 (PAI-2) using the pyrazolo pyrimidine small molecule inhibitor PP2 and exogenous urokinase plasminogen activator addition, respectively. Hck is well researched in cell adhesion while PAI-2 is virtually unknown in cell-material interactions. U937 on TCPS and PEG-only hydrogels secreted similar levels of inflammatory cytokines and gelatinase MMP-9. MCP-1 secretion from monocytes on PEG-only hydrogels was Hck independent in contrast to Hck-dependent MCP-1 secretion in U937 on TCPS. Overall, U937 adherent to sIPNs secrete low levels of soluble gelatinase MMP-9, IL-1beta, TNF-alpha, IL-6, and MCP-1 independent of Hck and PAI-2. This work demonstrates significant changes in surface dependent expression of proteins from monocytes adherent to PEG-based materials compared to TCPS.

Systematic review of the chemical composition of contemporary dental adhesives

Dental adhesives are designed to bond composite resins to enamel and dentin. Their chemical formulation determines to a large extent their adhesive performance in clinic. Irrespective of the number of bottles, an adhesive system typically contains resin monomers, curing initiators, inhibitors or stabilizers, solvents and sometimes inorganic filler. Each one of these components has a specific function. The aim of this article is to systematically review the ingredients commonly used in current dental adhesives as well as the properties of these ingredients. This paper includes an extensive table with the chemical formulation of contemporary dental adhesives.

Vascular responsiveness to dimethylaminoethyl methacrylate and its degradation products

The increasing use of acrylate-based resins in dentistry has raised questions about the biocompatibility of these substances with oral tissues. The focus of the present investigation was to assess the responsiveness of blood vessels to the resin polymerization accelerating agent dimethylaminoethyl methacrylate (DMAEMA) and its degradation products dimethylethanolamine (DME) and methacrylic acid (MAA), using the rat aortic ring preparation as a tissue model. DMAEMA induced concentration-dependent relaxation of norepinephrine (NE)-contracted aortic rings with and without endothelium. N-nitro-L-arginine methyl ester (L-NAME) selectively inhibited the endothelium-dependent relaxation induced by DMAEMA, suggesting the release of nitric oxide from the endothelium by DMAEMA. Both indomethacin and glybenclamide attenuated the vasorelaxation elicited by DMAEMA in the presence as well as in the absence of endothelium, providing evidence for the role of vasorelaxant prostanoid(s) and K(ATP) channel activation in the responses observed. On the other hand, while MAA was without any apparent effect on the rat aorta, DMAEMA at high and DME at relatively low concentrations caused contraction of the tissues with and without endothelium in the absence of NE. The DME-induced contraction was inhibited by indomethacin, suggesting the involvement of contractile arachidonic acid metabolite(s) in the action of DME. This observation was supported by the findings of increased thromboxane A(2) (TXA(2)) production in aortic rings incubated with DME. Taken together, the data suggest that both DMAEMA and its degradation product, DME, are vasoactive, inducing vasorelaxation and contraction by various mechanisms that may involve the release of nitric oxide from the endothelium, the activation of smooth muscle K(ATP) channels, and the generation of vasorelaxant prostanoid(s) and TXA(2). These effects may play a role in tissue homeostasis and certain adverse conditions associated with the use of dental resin materials containing DMAEMA and/or DME.