Immunocytochemical identification of type I collagen in acid-etched dentin

Effect of Alpha Hydroxy Acids as Dentin Conditioning Agents on Growth Factor Release: An In Vitro Study

AIM

The study aimed to evaluate the effects of alpha hydroxy acids and chelating agents on dentin conditioning for the release of growth factors.

METHODS

The agents used for dentin conditioning included 17% ethylenediaminetetraacetic acid (EDTA), 10% glycolic acid (GA), 10% citric acid (CA), and 5% maleic acid (MA). Forty horizontally sectioned (SV1) human dentine slices were conditioned for 5 and 10 minutes so that the growth factor liberation reached quantifiable levels. Transforming growth factor beta-1 (TGF-β1) release and surface exposure were quantified by enzyme-linked immunosorbent assay (ELISA). Growth factor measurement required immediately removing the solutions from each of the 48-well plates (with consistent dentine surface area and weight) and freezing at -20°C so that ELISA measured the growth factors.

RESULTS

After 5-min conditioning of dentine slices, CA was the most effective agent for growth factor release into the aqueous environment as measured by ELISA (post hoc Tukey's test p<0.05). Furthermore, dentine slices subjected to GA treatment for the same duration of time showed noticeably lower surface levels of TGF-β1 in comparison to the other agents employed.

CONCLUSIONS

Based on the findings of this in vitro study, a desirable biological growth factor-mediated effect may be gained when conditioning dentin with milder acidic or chelating agents such as CA, MA, and EDTA.

Effects of Etching Time and Ethanol Wet Bonding on Bond Strength and Metalloproteinase Activity in Radicular Dentin

(1) Background: The objective of this in vitro study was to evaluate the impact of different etching times and ethanol pre-treatments on the immediate bond strength of a hydrophilic multi-mode universal adhesive (Clearfil Universal Bond Quick, Kuraray, UBQ) and on the consequent gelatinolytic activity of metalloproteinases (MMPs) on radicular dentin. (2) Methods: Sixty single-root teeth were selected and divided into four groups according to the adhesive protocol applied for fiber post cementation: (G1) 15 s H3PO4 application + UBQ; (G2) 30 s H3PO4 application + UBQ; (G3) 15 s H3PO4 application + ethanol pre-treatment + UBQ; (G4) 30 s H3PO4 + ethanol pre-treatment + UBQ. After adhesive procedures, fiber posts were luted into the post space with a dual-curing cement (DC Core, Kuraray) and light-cured for 40 s. To perform the push-out test and nanoleakage analyses for both coronal end apical areas, 1 mm slices were prepared, following a 24 h storage period in artificial saliva. Additionally, an in situ zymographic assay was conducted to explore endogenous MMP activity within the radicular layer. Results were statistically analyzed with ANOVA and Tukey post hoc tests. Statistical significance was set at p < 0.05. (3) Result: ANOVA revealed a statistically significant difference in push-out bond strength related to the pre-treatment variable but did not highlight any significance of etching time. Specimens pre-treated with ethanol wet bond application showed higher bond strength (p < 0.01). In situ zymography quantification analyses revealed that all tested groups, independently of etching time end ethanol pre-treatment, activated MMP gelatinolytic activity. A significant increase in MMP activity was detected for the 30 s etching time. However, ETOH pre-treatment significantly reduced MMP activity within the adhesive interface (p < 0.01). (4) Conclusions: The tested adhesive showed similar results regardless of the etching time protocol. The gelatinolytic activity of MMPs was observed in all the groups. Further investigations and extended follow-ups are required to validate the results of the present study in vivo.

Degradation and Failure Phenomena at the Dentin Bonding Interface

Damage in the bonding interface is a significant factor that leads to premature failure of dental bonded restorations. The imperfectly bonded dentin-adhesive interface is susceptible to hydrolytic degradation and bacterial and enzyme attack, severely jeopardizing restorations' longevity. Developing caries around previously made restorations, also called "recurrent or secondary caries," is a significant health problem. The replacement of restorations is the most prevailing treatment in dental clinics, leading to the so-called "tooth death spiral". In other words, every time a restoration is replaced, more tooth tissue is removed, increasing the size of the restorations until the tooth is eventually lost. This process leads to high financial costs and detriment to patients' quality of life. Since the complexity of the oral cavity makes prevention a challenging task, novel strategies in Dental Materials and Operative fields are required. This article briefly overviews the physiological dentin substrate, features of dentin bonding, challenges and clinical relevance. We discussed the anatomy of the dental bonding interface, aspects of the degradation at the resin-dentin interface, extrinsic and intrinsic factors affecting dental bonding longevity, perspectives on resin and collagen degradation and how these subjects are connected. In this narrative review, we also outlined the recent progress in overcoming dental bonding challenges through bioinspiration, nanotechnology and advanced techniques to reduce degradation and improve dental bonding longevity.

Growth Factor release and dental pulp stem cell attachment following dentine conditioning- an in vitro study

Aim

The aim of the study was to investigate the effect of dentine conditioning agents on growth factor liberation and settlement of dental pulp progenitor cells (DPSCs) on dentine surfaces.

Methodology

The agents used included ethylenediaminetetraacetic acid (EDTA; 10%, pH 7.2), phosphoric acid (37%, pH < 1), citric acid (10%, pH 1.5) and polyacrylic acid (25%, pH 3.9). Human dentine slices were conditioned for exaggerated conditioning times of 5 and 10 min, so that the growth factor liberation reached quantifiable levels above the limit of detection of the laboratory methods employed. Transforming growth factor beta‐1 (TGF‐β1) release and surface exposure were quantified by enzyme‐linked immunosorbent assay (ELISA) and immunogold labelling. Scanning electron microscopy (SEM) was used to assess the morphology of cells and coverage by DPSCs cultured on dentine surfaces for 8 days.

Results

After 5‐min conditioning of dentine slices, citric acid was the most effective agent for growth factor release into the aqueous environment as measured by ELISA (Mann–Whitney U with Bonferroni correction, p < .01 compared with phosphoric and polyacrylic acid). As well as this, dentine slices treated with phosphoric acid for the same period, displayed significantly less TGF‐β1 on the surface compared with the other agents used, as measured by immunogold labelling (MWU with Bonferroni correction, p < .05). After 8 days, widespread coverage by DPSCs on dentine surfaces conditioned with citric acid and EDTA were evident under SEM. On dentine surfaces conditioned with phosphoric and polyacrylic acid, respectively, less spread cells and inconsistent cell coverage were observed.

Conclusions

Based on the findings of this in vitro study, a desirable biological growth factor‐mediated effect may be gained when conditioning dentine by milder acidic or chelating agents such as citric acid and EDTA. The results must be interpreted in the context that the potential of the applied materials inducing a desirable biological response in DPSCs is only one consideration amongst other important ones in a clinical setting. However, it is crucial to look beyond the mere physical effects of materials and move towards biologically based treatment approaches as far as the restorative management of teeth with viable dental pulps are concerned.

Co-distribution of cysteine cathepsins and matrix metalloproteases in human dentin

It has been hypothesized that cysteine cathepsins (CTs) along with matrix metalloproteases (MMPs) may work in conjunction in the proteolysis of mature dentin matrix. The aim of this study was to verify simultaneously the distribution and presence of cathepsins B (CT-B) and K (CT-K) in partially demineralized dentin; and further to evaluate the activity of CTs and MMPs in the same tissue. The distribution of CT-B and CT-K in sound human dentin was assessed by immunohistochemistry. A double-immunolabeling technique was used to identify, at once, the occurrence of those enzymes in dentin. Activities of CTs and MMPs in dentin extracts were evaluated spectrofluorometrically. In addition, in situ gelatinolytic activity of dentin was assayed by zymography. The results revealed the distribution of CT-B and CT-K along the dentin organic matrix and also indicated co-occurrence of MMPs and CTs in that tissue. The enzyme kinetics studies showed proteolytic activity in dentin extracts for both classes of proteases. Furthermore, it was observed that, at least for sound human dentin matrices, the activity of MMPs seems to be predominant over the CTs one.

Growth Factor Liberation and DPSC Response Following Dentine Conditioning

Liberation of the sequestrated bioactive molecules from dentine by the action of applied dental materials has been proposed as an important mechanism in inducing a dentinogenic response in teeth with viable pulps. Although adhesive restorations and dentine-bonding procedures are routinely practiced, clinical protocols to improve pulp protection and dentine regeneration are not currently driven by biological knowledge. This study investigated the effect of dentine (powder and slice) conditioning by etchants/conditioners relevant to adhesive restorative systems on growth factor solubilization and odontoblast-like cell differentiation of human dental pulp progenitor cells (DPSCs). The agents included ethylenediaminetetraacetic acid (EDTA; 10%, pH 7.2), phosphoric acid (37%, pH <1), citric acid (10%, pH 1.5), and polyacrylic acid (25%, pH 3.9). Growth factors were detected in dentine matrix extracts drawn by EDTA, phosphoric acid, and citric acid from powdered dentine. The dentine matrix extracts were shown to be bioactive, capable of stimulating odontogenic/osteogenic differentiation as observed by gene expression and phenotypic changes in DPSCs cultured in monolayer on plastic. Polyacrylic acid failed to solubilize proteins from powdered dentine and was therefore considered ineffective in triggering a growth factor-mediated response in cells. The study went on to investigate the effect of conditioning dentine slices on growth factor liberation and DPSC behavior. Conditioning by EDTA, phosphoric acid, and citric acid exposed growth factors on dentine and triggered an upregulation in genes associated with mineralized differentiation, osteopontin, and alkaline phosphatase in DPSCs cultured on dentine. The cells demonstrated odontoblast-like appearances with elongated bodies and long extracellular processes extending on dentine surface. However, phosphoric acid-treated dentine appeared strikingly less populated with cells, suggesting a detrimental impact on cell attachment and growth when conditioning by this agent. These findings take crucial steps in informing clinical practice on dentine-conditioning protocols as far as treatment of operatively exposed dentine in teeth with vital pulps is concerned.

Important compositional characteristics in the clinical use of adhesive systems

Improvements in dentin bonding systems have influenced modern restorative dentistry. The desire for minimal invasiveness has resulted in more-conservative cavity design, which basically relies on the effectiveness of current dentin bonding systems. Interaction of adhesives with enamel and dentin is based on two systems, commonly described as etch-and-rinse and self-etch. Priming and bonding agents can be separate or combined, resulting in two- or three-step systems for etch-and-rinse adhesives and one- or two-step systems for self-etch adhesives. Self-etch systems use acidic functional monomers that simultaneously demineralize and impregnate tooth structures. Etch-and-rinse and self-etch systems have advantages and disadvantages, which are primarily related to the simplified bonding procedures required under clinical conditions. Knowledge of the composition, characteristics, and mechanisms of adhesion for each adhesive system is critical in selecting the ideal adhesive materials for clinical use.

Immunocytochemical detection of dentin matrix proteins in primary teeth from patients with dentinogenesis imperfecta associated with osteogenesis imperfecta

Dentinogenesis imperfecta determines structural alterations of the collagen structure still not completely elucidated. Immunohisto-chemical analysis was used to assay type I and VI collagen, various non-collagenous proteins distribution in human primary teeth from healthy patients or from patients affected by type I dentinogenesis imperfecta (DGI-I) associated with osteogenesis imperfecta (OI). In sound primary teeth, an organized well-known ordered pattern of the type I collagen fibrils was found, whereas atypical and disorganized fibrillar structures were observed in dentin of DGI-I affected patients. Expression of type I collagen was observed in both normal and affected primary teeth, although normal dentin stained more uniformly than DGI-I affected dentin. Reactivity of type VI collagen was significantly lower in normal teeth than in dentin from DGI-I affected patients (P<0.05). Expressions of dentin matrix protein-1 (DMP1) and osteopontin (OPN) were observed in both normal dentin and dentin from DGI-I affected patients, without significant differences, being DMP1 generally more abundantly expressed. Immuno labeling for chondroitin sulfate (CS) and biglycan (BGN) was weaker in dentin from DGI-I-affected patients compared to normal dentin, this decrease being significant only for CS. This study shows ultra-structural alterations in dentin obtained from patients affected by DGI-I, supported by immunocytochemical assays of different collagenous and non-collagenous proteins.

Influence of metalloproteinases on dentin hybridization of one-bottle or self-etch dental bonding systems

AIM

To assess the influence of dentin substrate and chlorhexidine on the marginal seal of composite resin restorations.

MATERIALS AND METHODS

The sample comprised 20 third molars. Four cavities were drilled in the dentin sur face, followed by sealing and restoration of sound dentin (n = 10) or carious dentin (n = 10). In the control group, cavities were immediately restored as follows: G1: one-bottle bonding agent (OB) + composite resin (CR); G2: chlorhexidine 2.0% (CLX) + OB + CR; G3: self-etch bonding agent (SE) + CR; G4: CLX + SE + CR. In the experimental group (carious dentin), carious lesions were induced with S. mutans and cavities were restored as in the control group. Five specimens from each group (sound and carious) were stored in brain-heart infusion (BHI) medium for 6 months. All specimens were submerged in methylene blue 0.5% to test for microleakage. The Kruskal-Wallis and Student-Newman-Keuls tests were used to assess results.

RESULTS

On immediate assessment, there were no significant between-group differences in the sound dentin group, whereas in carious dentin, there was less leakage when OB and CLX were used. At 6 months, there was less leakage in the sound dentin group when OB and CLX were used; there were no between-group differences in carious dentin. Comparison of immediate and 6-month assessments showed a significant increase in leakage at 6 months when sound dentin was treated with SE and CLX and when carious dentin was treated with OB and CLX.

CONCLUSION

To ensure better dentin hybridization and preservation of the organic constituents of the dentin matrix, the properties of chlorhexidine digluconate and the components of the resin matrix must be taken into account.

CLINICAL SIGNIFICANCE

Metalloproteinases influence degradation of the hybrid layer in composite resin restorations, regardless of whether the bonding system used is one-bottle or self-etching.

Preventing root caries development under oral biofilm challenge in an artificial mouth

Objectives: To study the preventive effects of chlorhexidine against root caries under oral biofilm in an artificial mouth. Study Design: Sixteen human tooth-root disks were inoculated with a salivary sample that was produced by mixing the unstimulated saliva of three adults who had no untreated caries. The disks were incubated in an artificial mouth fed with a 5% sucrose solution three times daily for one week. Eight disks received a twice daily rinse of 0.12% chlorhexidine (test group). The other eight disks were rinsed in distilled water (control). The biofilm was then studied with three techniques: colony forming unit (CFU) counting, scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). The changes in the chemical structure of the root surface were studied using Fourier transform infra-Red spectroscopy. Type-I collagen and proteoglycans on the root surface were quantified using immunocytochemical staining. Results: The log CFU for the test and control groups were 4.21 and 8.27, respectively (p<0.001). The CFU count of Streptococci and Lactobacilli were negligible. Both the SEM and the CLSM showed suppressed bacteria growth in the test group. The log [amide-I: HPO42-] of the test and control groups were 1.11 and 1.93, respectively (p=0.02). The mean counts of sound type-I collagen in the test and control groups were 16.8/?m2 and 13.0/?m2, respectively (p<0.001), whereas the mean counts of intact proteoglycans were 5.6/?m2 and 3.5/?m2, respectively (P<0.001). Conclusions: Chlorhexidine suppressed the growth of selected cariogenic bacteria in oral biofilm on the root surface and thus protected tooth-root from cariogenic challenge.

Key words:Chlorhexidine, biofilm, caries risk, root, caries, artificial mouth, demineralization, streptococci, lactobacilli, proteoglycans, collagen I.

The dentin organic matrix - limitations of restorative dentistry hidden on the nanometer scale

The prevention and treatment of dental caries are major challenges occurring in dentistry. The foundations for modern management of this dental disease, estimated to affect 90% of adults in Western countries, rest upon the dependence of ultrafine interactions between synthetic polymeric biomaterials and nanostructured supramolecular assemblies that compose the tooth organic substrate. Research has shown, however, that this interaction imposes less than desirable long-term prospects for current resin-based dental restorations. Here we review progress in the identification of the nanostructural organization of the organic matrix of dentin, the largest component of the tooth structure, and highlight aspects relevant to understating the interaction of restorative biomaterials with the dentin substrate. We offer novel insights into the influence of the hierarchically assembled supramolecular structure of dentin collagen fibrils and their structural dependence on water molecules. Secondly, we review recent evidence for the participation of proteoglycans in composing the dentin organic network. Finally, we discuss the relation of these complexly assembled nanostructures with the protease degradative processes driving the low durability of current resin-based dental restorations. We argue in favour of the structural limitations that these complexly organized and inherently hydrated organic structures may impose on the clinical prospects of current hydrophobic and hydrolyzable dental polymers that establish ultrafine contact with the tooth substrate.

Mechanical heterogeneity of dentin at different length scales as determined by AFM phase contrast

In this study we sought to gain insights of the structural and mechanical heterogeneity of dentin at different length scales. We compared four distinct demineralization protocols with respect to their ability to expose the periodic pattern of dentin collagen. Additionally, we analyzed the phase contrast resulting from AFM images obtained in tapping mode to interrogate the viscoelastic behavior and surface adhesion properties of peritubular and intertubular dentin, and partially demineralized dentin collagen fibrils, particularly with respect to their gap and overlap regions. Results demonstrated that all demineralization protocols exposed the gap and overlap zones of dentin collagen fibrils. Phase contrast analyses suggested that the intertubular dentin, where the organic matrix is concentrated, generated a higher phase contrast due a higher contribution of energy dissipation (damping) than the highly mineralized peritubular region. At increasing amplitudes, viscoelasticity appeared to play a more significant contribution to the phase contrast of the images of collagen fibrils. The overlap region yielded a greater phase contrast than the more elastic gap zones. In summary, our results contribute to the perspective that, at different length scales, dentin is constituted of structural features that retain heterogeneous mechanical properties contributing to overall mechanical performance of the tissue. Furthermore, the interpretation of phase contrast from images generated with AFM tapping mode appears to be an effective tool to gain an improved understanding of the structure and property relationship of biological tissues and biomaterials at the micro- and nano-scale.

Biological effects of a root conditioning agent for dentin surface modification in vitro

Purpose

Connective tissue reattachment to periodontally damaged root surfaces is one of the most important goals of periodontal therapy. The aim of this study was to develop a root conditioning agent that can demineralize and detoxify the infected root surface.

Methods

Dentin slices obtained from human teeth were treated with a novel root planing agent for 2 minutes and then washed with phosphate-buffered saline. Smear layer removal and type I collagen exposure were observed by scanning electron microscopy (SEM) and type I collagen immunostaining, respectively. Cell attachment and lipopolysaccharides (LPS) removal demonstrated the efficiency of the root conditioning agent.

Results

SEM revealed that the smear layer was entirely removed and the dentinal tubules were opened by the experimental gel. Type I collagen was exposed on the surfaces of the dentin slices treated by the experimental gel, which were compared with dentin treated with other root planing agents. Dentin slices treated with the experimental gel showed the highest number of attached fibroblasts and flattened cell morphology. The agar diffusion assay demonstrated that the experimental gel also has effective antimicrobial activity. Escherichia coli LPS were effectively removed from well plates by the experimental gel.

Conclusions

These results demonstrated that this experimental gel is a useful tool for root conditioning of infected root surfaces and can also be applied for detoxification of ailing implant surface threads.

Adhesive systems: important aspects related to their composition and clinical use

This literature review article addresses the types and the main components of different etch-and-rinse and self-etch adhesive systems available in the market, and relates them to their function, possible chemical interactions and influence of handling characteristics. Scanning electron microscopy (SEM) images are presented to characterize the interface between adhesives and dentin. Adhesive systems have been recently classified according to their adhesion approaches in etch-and-rinse, self-etch and glass ionomer. The etch-andrinse systems require a specific acid-etch procedure and may be performed in two or three steps. Self-etch systems employ acidic monomers that demineralize and impregnate dental substrates almost at the same time. These systems are separated in one or two steps. Some advantages and deficiencies were noted for etch-and-rinse and self-etch approaches, mainly for the simplified ones due to some chemical associations and interactions. The SeM micrographs illustrate different relationships between adhesive systems and dental structures, particularly dentin. The knowledge of composition, characteristics and mechanisms of adhesion of each adhesive system is of fundamental importance to permit the adoption of ideal bonding strategies under clinical conditions.

Localization of matrix metalloproteinases (MMPs-2, 8, 9 and 20) in normal and carious dentine

BACKGROUND

Dentine matrix metalloproteinases (MMPs) may participate in the destruction of dentine following demineralization by bacterial acids. This study investigated the localization of MMPs in carious dentine.

METHODS

Frozen sections of dentine caries were prepared without demineralization and immersed in monoclonal antibody against MMP-2, -8, -9 and -20. The sections were labelled by IgG conjugated with gold colloidal particles, and observed under FE-SEM. Labelling indexes (number of gold particles/mum(2)) of outer and inner carious dentine, respectively, with and without bacterial infection, were compared with that of normal dentine.

RESULTS

MMP-2 was distributed in both carious and normal dentine; the level of MMP-2 showed no significant difference among the outer caries, inner caries, and normal dentine. The labelling indexes of MMP-8 and MMP-9 both significantly decreased at the inner carious dentine compared with the level of normal dentine, but intensified again at the outer caries region. The labelling index of MMP-20 was the highest at normal dentine.

CONCLUSIONS

The localization of MMPs was visibly detected using immunogold labelling. The localization of MMP-2 showed no significant difference among the three regions, while MMP-8 and MMP-9 showed significant reduction at the inner caries layer, and MMP-20 reduced toward the outer caries.

Deproteinization Effects of NaOCl on Acid-etched Dentin in Clinically-relevant vs Prolonged Periods of Application. A Confocal and Environmental Scanning Electron Microscopy Study

Complete removal of the collagen matrix prior to dentin bonding procedures has been proposed as a strategy to prevent later degradation, which may jeopardize the longevity of resin-dentin bonds. This study demonstrates that a complete removal of the exposed collagen matrix from the etched dentin surface can be achieved by applying a 12 w/v% NaOCl solution, but at this concentration, it requires a far longer reaction time than is clinically acceptable.

Dentin treatment with MMPs inhibitors does not alter bond strengths to caries-affected dentin

OBJECTIVES

This study aimed to investigate if the use of protease inhibitors (EDTA and chlorhexidine) may influence microtensile bond strength (MTBS) of an etch-and-rinse adhesive system to caries-affected human dentin.

METHODS

Flat middle coronal dentin surfaces with a central region of caries-affected dentin surrounded by sound dentin were bonded with Adper Scotchbond 1 after: (1) etching with 35% H3PO4; (2) etching with 0.1M EDTA and (3) 35% H3PO4-etching followed by 5% chlorhexidine application. Resin composite build-ups were constructed incrementally and trimmed to yield hourglass specimens (0.8mm2 bonded area) that contained sound or caries-affected dentin (confirmed after debonding by microhardness measurements - KHN). Bonded specimens were tensioned at 0.5mm/min. Data were analyzed by ANOVA and multiple comparisons tests (p<0.05). Failure mode analysis was performed by scanning electron microscopy (SEM).

RESULTS

H(3)PO(4), EDTA and chlorhexidine pre-treatments yielded similar MTBS values, in both dentin substrates. Bond strength to sound dentin was significantly higher than that to caries-affected dentin after H3PO4-etching. Caries-affected dentin exhibited lower KHN than sound dentin.

CONCLUSIONS

Conditioning of caries-affected dentin with EDTA or a combined use with H3PO4 and chlorhexidine may be proposed as these protease inhibitors do not reduce MTBS to caries-affected dentin if compared to conventional H3PO4 treatment.

Effect of dentin depth on hybridization quality using different bonding tactics in vivo

OBJECTIVES

Incomplete resin infiltration and polymerization of adhesive contributed to nanoleakage formation. This study tested the null hypothesis that adoption of different bonding tactics and dentine depth will not affect hybridization quality in vivo.

METHODS

Class V cavities were prepared on the labial/buccal surface of monkey teeth. They were bonded by Single Bond (a two-step total-etch adhesive), Clearfil SE Bond (a two-step self-etch adhesive), or Clearfil S(3) Bond (an all-in-one self-etch adhesive). Combined nanoleakage analysis and quantitative immunolabeling evaluation were carried out in the hybrid layer formed in both cervical superficial and deep dentine.

RESULTS

Single Bond showed reticular and spotted nanoleakage while Clearfil SE Bond and Clearfil S(3) Bond presented only a spotted one. While Single Bond showed increased concentration of labeling of type I collagen within the deep part of the hybrid layer, two self-etch adhesives-Clearfil SE Bond and Clearfil S(3) Bond revealed a homogeneous labeling pattern, even if the latter presented a significantly increased labeling index in deep dentine.

CONCLUSIONS

Different bonding tactics showed different nanoleakage patterns and immunolabeling index, and was influenced by dentine depth at different levels in vivo.

Immunohistochemical identification of decorin and biglycan in human dentin: a correlative field emission scanning electron microscopy/transmission electron microscopy study

Decorin and biglycan, two small leucine-rich proteoglycans, have been proposed to play important roles in matrix-mediated formation of mineralized tissues, and their three-dimensional arrangement in human dentin is still not completely understood. The aim of this study was to immunohistochemically analyze the distribution of decorin and biglycan in human predentin/dentin organic matrix under a high-resolution field emission in-lens scanning electron microscope (FEI-SEM) and a transmission electron microscope (TEM). Tooth dentin specimens were submitted to either a preembedding or a postembedding immunolabeling technique using primary antibodies antidecorin and antibiglycan and gold-conjugated secondary antibodies. Correlative FEI-SEM/TEM observations showed that the two antibodies yielded a similar labeling pattern over the processes of odontoblasts and the predentin. Decorin and biglycan were mainly associated with the collagen fibers within the predentin layer, revealing a moderate immunoreaction that was significantly higher compared to the one observed on dentin. Thus, a generally weak labeling for decorin was found in dentin, which, however, was significantly higher on odontoblast processes within dentinal tubules than in intertubular dentin. On the other hand, biglycan immunolocalization on dentin revealed few gold particles rather uniformly distributed, without showing significant differences between tubular and intertubular regions. In conclusion, this study reveals distinct distribution patterns of decorin and biglycan and their relation with collagen. Decorin's and biglycan's precise roles within prematrix and mineralized matrix in human teeth should be further clarified.

Immunohistochemical identification of type I and type III collagen and chondroitin sulphate in human pre-dentine: a correlative FEI-SEM/TEM study

AIM

To identify type I- (I-CF) and type III-collagen fibrils (III-CF) and chondroitin 4/6 sulphate (CS) within human pre-dentine by means of a correlative analysis under field emission in-lens-scanning electron microscopy (FEI-SEM) and transmission electron microscopy (TEM).

METHODOLOGY

Human-extracted teeth were obtained and submitted to either a pre-embedding or a post-embedding immunolabelling procedure using monoclonal primary antibodies anti-I-CF, anti-III-CF and anti-CS. Gold-conjugated secondary antibodies were coupled to primary antibodies to visualize labelling under the electron beam. Correlative labelling patterns were obtained for I-CF and CS under both FEI-SEM and TEM.

RESULTS

Field emission in lens-SEM analysis revealed an intricate three-dimensional network of I-CF and CS clarifying the intimate relationship between the two main components of the pre-dentine organic matrix. TEM analysis revealed odontoblasts exhibiting intracellular labelling for CS, which became more intense and diffuse over the pre-dentine organic matrix. The same diffuse immunoreaction was revealed for I-CF, whereas a weak immunolocalization of III-CF was found scattered throughout the pre-dentine layer and over the collagen fibrils.

CONCLUSIONS

Both the pre- and post-embedding immunohistochemical approaches have led to the visualization of CF- and CS-labelling distribution within the pre-dentine layer, adding further knowledge on the elucidation of collagen-proteoglycans interaction in the organic matrix of human dental roots.

Effects of citric acid and EDTA conditioning on exposed root dentin: An immunohistochemical analysis of collagen and proteoglycans

OBJECTIVE

Preservation of structural and biochemical properties of the root dentin matrix is crucial to favor healing and regenerative periodontal processes. Aim of this study was to evaluate the biochemical characteristics of collagen and chondroitin sulphate of root dentin surfaces exposed by periodontal disease after acid conditioning by means of an immunohistochemical technique.

DESIGN

Human teeth scheduled for extraction due to periodontal reason were submitted to: (A) scaling and root planning; (B) ultrasonic instrumentation; (C) no instrumentation. Teeth were then exposed to: (1) 10% citric acid; (2) 17% EDTA; (3) no etching. A double immunolabeling technique was performed to identify type-I collagen and proteoglycans and analyzed under FEI-SEM.

RESULTS

Use of 10% citric acid revealed intense labeling for collagen fibrils and proteoglycans; lower labeling was found after EDTA conditioning. Unetched specimens showed residual smear layer on the dentin surface resulting in no evident surface labeling.

CONCLUSIONS

This study supports the hypothesis that manual or ultrasonic instrumentation alone is not able to expose the sound dentin matrix, whereas a subsequent acidic conditioning exposes collagen fibrils and associated proteoglycans. The immunohistochemical technique revealed that despite their acidity, both citric acid and EDTA were able to preserve the structural and biochemical properties of the exposed dentin matrix.

Reduced antigenicity of type I collagen and proteoglycans in sclerotic dentin

Antigenic alterations to the dentin organic matrix may be detected by an immunohistochemical approach. We hypothesized that alterations in the antigenicity of type I collagen and proteoglycans occur in sclerotic dentin under caries lesions. Transverse sections were prepared from carious teeth in the sclerotic zone and normal hard dentin. A double-immunolabeling technique was performed on these sections, with anti-type I collagen and anti-chondroitin 4/6 sulfate monoclonal primary antibodies. We used gold-conjugated secondary antibodies to visualize the distribution of intact collagen fibrils and proteoglycans by high-resolution SEM. For sclerotic dentin, labeling densities were 19.57 +/- 3.01/microm2 for collagen and 9.84 +/- 2.62/microm2 for proteoglycans. For normal hard dentin, values were 35.20 +/- 2.73/microm2 and 17.03 +/- 1.98/microm2, respectively. Distribution of intact collagen fibrils and proteoglycans in sclerotic dentin was significantly lower than in normal hard dentin. Reductions in antigenicity from the organic matrix of sclerotic dentin under caries lesions raise concern about the potential of intrafibrillar remineralization.