Hydroxyapatite and gelatin composite foams processed via novel freeze-drying and crosslinking for use as temporary hard tissue scaffolds

Freeze-Drying Process for the Fabrication of Collagen-Based Sponges as Medical Devices in Biomedical Engineering

This paper presents a systematic review of a key sector of the much promising and rapidly evolving field of biomedical engineering, specifically on the fabrication of three-dimensional open, porous collagen-based medical devices, using the prominent freeze-drying process. Collagen and its derivatives are the most popular biopolymers in this field, as they constitute the main components of the extracellular matrix, and therefore exhibit desirable properties, such as biocompatibility and biodegradability, for in vivo applications. For this reason, freeze-dried collagen-based sponges with a wide variety of attributes can be produced and have already led to a wide range of successful commercial medical devices, chiefly for dental, orthopedic, hemostatic, and neuronal applications. However, collagen sponges display some vulnerabilities in other key properties, such as low mechanical strength and poor control of their internal architecture, and therefore many studies focus on the settlement of these defects, either by tampering with the steps of the freeze-drying process or by combining collagen with other additives. Furthermore, freeze drying is still considered a high-cost and time-consuming process that is often used in a non-optimized manner. By applying an interdisciplinary approach and combining advances in other technological fields, such as in statistical analysis, implementing the Design of Experiments, and Artificial Intelligence, the opportunity arises to further evolve this process in a sustainable and strategic manner, and optimize the resulting products as well as create new opportunities in this field.

Green Synthesis of Bioactive Hydroxyapatite/Cellulose Composites from Food Industrial Wastes

This work aimed at conversion of worthless indurtial wastes to valuable product. Herein, bioactive composites based on bacterial cellulose (BC) and eggshell or eggshell-derived hydroxyapatite (HAp) were prepared by a green method using Gluconacetobacter xylinum bacteria. The effect of addition of eggshell (BC/Eg) and eggshell-derived HAp (BC/HAp-Eg) on the bacterial cellulose yield, biodegradation and biocompatibility was studied. For comparison, HAp derived from chemical precursors was synthesized (BC/HAp-ch). The resultant composites were characterized by XRD, FTIR, and SEM/EDX. Furthermore, the biodegradation and bioactivity were assessed in SBF, and the cell viability was studied against oral normal cells. The results showed that the productivity of BC applied HAp-derived eggshell (1.83 g/L) was higher than that of using (1.37 g/L). Interestingly, the eggshell was converted to Ca3(PO4)2 during incubation in the bacterial culture medium, while Ca3(PO4)2 was formed as a secondary phase when using either eggshell-derived HAp or chemically-derived. The in vitro bioactivity test in SBF showed that all composites were induced the formation of a bone-like apatite layer on their surface with Ca/P ratio, 1.49, 1.35, and 1.41 for BC/Eg, BC/HAp-ch, and BC/HAp-Eg, respectively, near to the ratio in the natural HAp. Finally, the in vitro cell viability test was confirmed good biocompatibility against the composites. However, at high sample concentration (250 µg/mL), BC/HA-Eg showed the higher cell viability (95.2%) than that of BC/Eg (80.5%) and BC/HA-ch (86.2%). In conclusion, eggshell waste could be used directly with bacterial cellulose to produce bioactive composites without the need to convert it to HAp which reduced the cost of production and thus has a higher economic return. Obiviously, eggshell waste can act as calcium, organic matter source, pH preservation, nuterilizing agent along with potential instead of costly buffering agent in the BC culture medium and further for increased the BC production.

Gelatin-based cellular solids: Fabrication, structure and properties

Although most cellular polymers are made from thermoplastics using different foaming technologies, gelatin and many other natural polymers can form hydrogels and convert them to cellular solids using various techniques, many of which differ from traditional plastic foaming, and so does their resulting structures. Cellular solids from natural hydrogels are porous materials that often exhibit a combination of desirable properties, including high specific surface area, biochemical activity, as well as thermal and acoustic insulation properties. Among natural hydrogels, gelatin-based porous materials are widely explored due to their availability, biocompatibility, biodegradability and relatively low cost. In addition, gelatin-based cellular solids have outstanding properties and are currently subject to increasing scientific research due to their potential in many applications, such as biocompatible cellular materials or biofoams to facilitate waste treatment. This article aims at providing a comprehensive review of gelatin cellular solids processing and their processing-properties-structure relationship. The fabrication techniques covered include aerogels production, mechanical foaming, blowing agents use, 3D printing, electrospinning and particle leaching methods. It is hoped that the assessment of their characteristics provides compiled information and guidance for selecting techniques and optimization of processing conditions to control material structure and properties to meet the needs of the finished products.

Synthesis of Natural Nano-Hydroxyapatite from Snail Shells and Its Biological Activity: Antimicrobial, Antibiofilm, and Biocompatibility

Hydroxyapatite nanoparticles (HAn) have been produced as biomaterial from biowaste, especially snail shells (Atactodea glabrata). It is critical to recycle the waste product in a biomedical application to overcome antibiotic resistance as well as biocompatibility with normal tissues. Moreover, EDX, TEM, and FT-IR analyses have been used to characterize snail shells and HAn. The particle size of HAn is about 15.22 nm. Furthermore, higher inhibitory activity was observed from HAn than the reference compounds against all tested organisms. The synthesized HAn has shown the lowest MIC values of about 7.8, 0.97, 3.9, 0.97, and 25 µg/mL for S. aureus, B. subtilis, K. pneumonia, C. albicans, and E. coli, respectively. In addition, the HAn displayed potent antibiofilm against S. aureus and B. subtilis. According to the MTT, snail shell and HAn had a minor influence on the viability of HFS-4 cells. Consequently, it could be concluded that some components of waste, such as snail shells, have economic value and can be recycled as a source of CaO to produce HAn, which is a promising candidate material for biomedical applications.

Dual setting brushite—gelatin cement with increased ductility and sustained drug release

A novel dual setting brushite-gelatin cement was achieved by genip ininitiated cross-linking of gelatin during cement setting. Although the combination of an inorganic and organic phase resulted in a decrease of the compressive strength from about 10 MPa without polymeric phase to 3–6–MPa for gelatin modified composites, an increase in elastic properties due to the gelatin hydrogel with a concentration of 10.0 w/v% was achieved. For a powder-to-liquid ratio of 2.5 g*mL−1, a shift of initial maximum stress value during compression testing was observed up to 5% deformation and tested samples showed a pseudo-ductile fracture behavior. The obtained composites of the different formulations were characterized regarding phase composition, porosity as well as drug loading capacity with rifampicin and vancomycin. For the latter, a sustained and prolonged release was realized with a drug release profile according to the Higuchi model and a release exponent of n = 0.5 for the formulation with a PLR of 2.5 g*mL−1 and an incorporation of 10.0 w/v% gelatin.

3D-printed alginate-hydroxyapatite aerogel scaffolds for bone tissue engineering

3D-printing technology allows the automated and reproducible manufacturing of functional structures for tissue engineering with customized geometries and compositions by depositing materials layer-by-layer with high precision. For these purposes, the production of bioactive gel-based 3D-scaffolds made of biocompatible materials with well-defined internal structure comprising a dual (mesoporous and macroporous) and highly interconnected porosity is essential. In this work, aerogel scaffolds for bone regeneration purposes were obtained by an innovative strategy that combines the 3D-printing of alginate-hydroxyapatite (HA) hydrogels and the supercritical CO₂ drying of the gels. BET and SEM analyses were performed to assess the textural parameters of the obtained aerogel scaffolds and the dimensional accuracy to the original computer-aided design (CAD) design was also evaluated. The biological characterization of the aerogel scaffolds was also carried out regarding cell viability, adhesion and migration capacity. The obtained alginate-HA aerogel scaffolds were highly porous, biocompatible, with high fidelity to the CAD-pattern and also allowed the attachment and proliferation of mesenchymal stem cells (MSCs). An enhancement of the fibroblast migration toward the damaged area was observed in the presence of the aerogel formulations tested, which is positive in terms of bone regeneration.

Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material

Freeze drying was compared with spray drying regarding feasibility to process wild thyme drugs in order to obtain dry formulations at laboratory scale starting from liquid extracts produced by different extraction methods: maceration and heat-, ultrasound-, and microwave-assisted extractions. Higher total powder yield (based on the dry weight prior to extraction) was achieved by freeze than spray drying and lower loss of total polyphenol content (TPC) and total flavonoid content (TFC) due to the drying process. Gelatin as a coating agent (5% w/w) provided better TPC recovery by 70% in case of lyophilization and higher total powder yield in case of spray drying by diminishing material deposition on the wall of the drying chamber. The resulting gelatin-free and gelatin-containing powders carried polyphenols in amount ~190 and 53–75 mg gallic acid equivalents GAE/g of powder, respectively. Microwave-assisted extract formulation was distinguished from the others by a higher content of polyphenols, proteins and sugars, higher bulk density and lower solubility. The type of the drying process mainly affected the position of the gelatin-derived -OH and amide bands in FTIR spectra. Spray-dried formulations compared to freeze-dried expressed higher thermal stability as confirmed by differential scanning calorimetry analysis and a higher diffusion coefficient; the last feature can be associated with the lower specific surface area of irregularly shaped freeze-dried particles (151–223 µm) compared to small microspheres (~8 µm) in spray-dried powder.

Three-Dimensional Printing of Hydroxyapatite Composites for Biomedical Application

Hydroxyapatite (HA) and HA-based nanocomposites have been recognized as ideal biomaterials in hard tissue engineering because of their compositional similarity to bioapatite. However, the traditional HA-based nanocomposites fabrication techniques still limit the utilization of HA in bone, cartilage, dental, applications, and other fields. In recent years, three-dimensional (3D) printing has been shown to provide a fast, precise, controllable, and scalable fabrication approach for the synthesis of HA-based scaffolds. This review therefore explores available 3D printing technologies for the preparation of porous HA-based nanocomposites. In the present review, different 3D printed HA-based scaffolds composited with natural polymers and/or synthetic polymers are discussed. Furthermore, the desired properties of HA-based composites via 3D printing such as porosity, mechanical properties, biodegradability, and antibacterial properties are extensively explored. Lastly, the applications and the next generation of HA-based nanocomposites for tissue engineering are discussed.

Evaluation of a novel nanocrystalline hydroxyapatite powder and a solid hydroxyapatite/Chitosan-Gelatin bioceramic for scaffold preparation used as a bone substitute material

Artificially fabricated hydroxyapatite (HAP) shows excellent biocompatibility with various kinds of cells and tissues which makes it an ideal candidate for a bone substitute material. In this study, hydroxyapatite nanoparticles have been prepared by using the wet chemical precipitation method using calcium nitrate tetra-hydrate [Ca(NO₃)₂.4H₂O] and di-ammonium hydrogen phosphate [(NH₄)₂ HPO₄] as precursors. The composite scaffolds have been prepared by a freeze-drying method with hydroxyapatite, chitosan, and gelatin which form a 3D network of interconnected pores. Glutaraldehyde solution has been used in the scaffolds to crosslink the amino groups (|NH₂) of gelatin with the aldehyde groups (|CHO) of chitosan. The X-ray diffraction (XRD) performed on different scaffolds indicates that the incorporation of a certain amount of hydroxyapatite has no influence on the chitosan/gelatin network and at the same time, the organic matrix does not affect the crystallinity of hydroxyapatite. Transmission electron microscope (TEM) images show the needle-like crystal structure of hydroxyapatite nanoparticle. Scanning Electron Microscope (SEM) analysis shows an interconnected porous network in the scaffold where HAP nanoparticles are found to be dispersed in the biopolymer matrix. Fourier transforms infrared spectroscopy (FTIR) confirms the presence of hydroxyl group (OH^-) , phosphate group (PO^3-₄) , carbonate group (CO^2-₃) , imine group (C=N), etc. TGA reveals the thermal stability of the scaffolds. The cytotoxicity of the scaffolds is examined qualitatively by VERO (animal cell) cell and quantitatively by MTTassay. The MTT-assay suggests keeping the weight percentage of glutaraldehyde solution lower than 0.2%. The result found from this study demonstrated that a proper bone replacing scaffold can be made up by controlling the amount of hydroxyapatite, gelatin, and chitosan which will be biocompatible, biodegradable, and biofriendly for any living organism.

Gelatin-polycaprolactone-nanohydroxyapatite electrospun nanocomposite scaffold for bone tissue engineering

Bone injuries and fractures generally take a long period to heal itself. To address this problem, bone tissue engineering (BTE) has gained significant research impetus. Among the several techniques used for scaffold fabrication, electrospinning ought to be the most promising technique for the development of the nanostructured scaffolds. The present study was carried out to fabricate an electrospun nanocomposite scaffold for BTE by using gelatin, polycaprolactone (PCL), and nanohydroxyapatite (nHAp). To prepare Gelatin-PCL-nHAp nanocomposite scaffold: Gelatin-PCL blend was electrospun and then treated with nHAp (1 wt%) for different time periods. The fabricated nanocomposite scaffold was analysed by field emission scanning electron microscopy (FESEM) to determine the fiber diameter and evaluate the fiber morphology. The Gelatin-PCL-nHAp nanocomposite scaffold-20 min exhibited the average fiber diameter of 615±269 nm and average pore size 4.7±1.04 μm, and also revealed the presence of nHAp particles over the Gelatin-PCL scaffold surface. Further, X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) spectroscopy and thermogravimetric (TG) analysis also indicated the deposition of nHAp over the Gelatin-PCL scaffold surface. MTT assay and DNA quantification showed good viability and significant proliferation of human osteoblasts on Gelatin-PCL-nHAp nanocomposite scaffold. Moreover, cell-scaffold constructs illustrated efficient cellular attachment and adequately spread cells, and it also depicts characteristic polygonal morphology of osteoblasts over the Gelatin-PCL-nHAp nanocomposite scaffold. Thus, the results of in-vitro analysis of electrospun nanocomposite scaffold suggest that the Gelatin-PCL-nHAp scaffold can be a potential candidate for BTE applications.

OPTIMIZATION OF COLLAGEN-ELASTIN-LIKE POLYPEPTIDE-BIOGLASS SCAFFOLD COMPOSITION FOR OSTEOGENIC DIFFERENTIATION OF ADIPOSE-DERIVED STEM CELLS

We have developed a multicomponent hydrogel scaffold that can mimic the bone extracellular matrix by incorporating collagen, elastin-like polypeptide (ELP), and Bioglass. We examined the effects of Bioglass addition to collagen-ELP scaffolds on mechanical properties, physical characteristics, and in vitro osteogenic differentiation, by varying the Bioglass amount and particle size. Response surface methodology with a central composite design predicted 5 mg (6.6 mg/mL) Bioglass with a particle size of 142 ± 5 μm as the optimal amount and particle size to be mixed with 6 mg/mL collagen and 18 mg/mL ELP to obtain a combination of maximized compressive properties. Swelling ratio and FTIR spectroscopy indicated lower hydrophilicity and the presence of hydrophobic and secondary interactions between collagen, ELP, and Bioglass. Scanning electron microscopy showed a nanofibrous morphology of intermingled collagen-ELP-Bioglass network. In vitro osteogenic characterization using human adipose-derived stem cells revealed increased cell attachment and proliferation with increased ALP activity, osteocalcin content, and mineralized deposit formation during a three-week culture. Numerous mineralized deposits composed of calcium and phosphorous were shown by energy dispersive spectroscopy. Overall, our results show that the collagen-ELP-Bioglass multicomponent composites have enhanced mechanical properties with adequate physical features and cell culture properties for bone tissue engineering.

Silk fibroin/hydroxyapatite scaffold: a highly compatible material for bone regeneration

In recent years remarkable efforts have been made to produce artificial bone through tissue engineering techniques. Silk fibroin (SF) and hydroxyapatite (HA) have been used in bone tissue regeneration as biomaterials due to mechanical properties of SF and biocompatibility of HA. There has been growing interest in developing SF/HA composites to reduce bone defects. In this regard, several attempts have been made to study the biocompatibility and osteoconductive properties of this material. This article overviews the recent advance from last few decades in terms of the preparative methods and application of SF/HA in bone regeneration. Its first part is related to SF that presents the most common sources, preparation methods and comparison of SF with other biomaterials. The second part illustrates the importance of HA by providing information about its production and properties. The third part presents comparative studies of SF/HA composites with different concentrations of HA along with methods of preparation of composites and their applications.

dos Santos BF, A. Tavares A, Maciel MA, Lucena BDM, L. Fook MV, de L. Silva SM. The Impact of the Ionic Cross-Linking Mode on the Physical and In Vitro Dexamethasone Release Properties of Chitosan/Hydroxyapatite Beads

In this study, the effect of the ionic cross-linking mode on the ability to control physical properties and in vitro release behavior of the dexamethasone (DEX) drug from chitosan (CS) and chitosan/hydroxyapatite (CS/HA) beads was investigated. CS solutions without and with HA and DEX were dripped into two coagulation solutions, prepared with a non-toxic ionic crosslinker (sodium tripolyphosphate, TPP) and distilled water, one at pH = 9.0 and other at pH = 6.0. Optical microscopy (OM) and scanning electron microscopy (SEM) results showed changes on the surface topology of the beads, with a reduction of roughness for beads prepared at pH = 6.0 and an increase for the one prepared at pH = 9.0. The diameter and sphericity of the beads prepared at pH = 6.0 proved more uniform and had a larger pore size with a good interconnectivity framework. Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) suggested a higher crosslinking degree for beads prepared at pH = 6.0, corroborated by X-ray diffraction profiles (XRD) analysis that indicated a decrease in the crystalline structure for such beads. In in vitro drug release data, all beads presented a sustained release during the studied period (24 h). The drug release rate was affected by the pH of the coagulation solution used in the preparation of the beads. The in vitro kinetics of the release process was of the Peppas-Sahlin model, controlled by both diffusion and relaxation of polymer chains or swelling (anomalous transport mechanism). Our results suggest that DEX-loaded CS/HA beads, crosslinked in TPP coagulation solution at pH = 9.0, led to a decrease in the DEX release rate and prolonged the release period. Thus, this composition might have prospective as a functional material for bone and cartilage tissue engineering.

Nanocomposite scaffold seeded with mesenchymal stem cells for bone repair

The mechanical property of bone tissue scaffolds is one of the most important aspects in bone tissue engineering that has remained problematic. In our previous study, we fabricated a three-dimensional scaffold from nano-hydroxyapatite/gelatin (nHA/Gel) and investigated its efficiency in promoting bone regeneration both in vitro and in vivo. In the present study, the effect of adding silicon carbide (SiC) on the mechanical and biological behaviors of the nHA/Gel/SiC and bone regeneration in vivo were determined. nHA and SiC were synthesized and characterized by the X-ray diffraction pattern and transmission electron microscope image. Layer solvent casting, freeze drying, and lamination techniques were applied to prepare these scaffolds. Then, the biocompatibility and cell adhesion behavior of the synthesized nHA/Gel/SiC scaffolds were investigated. For in vivo studies, rats were categorized into three groups: blank defect, blank scaffold, and rat bone marrow mesenchymal stem cells (rBM-MSCs)/scaffold. After 1, 4, and 12 weeks post-injury, the rats were sacrificed and the calvaria were harvested. Sections with a thickness of 5 µm thickness were prepared and stained with hematoxylin-eosin and Masson's Trichrome, and immunohistochemistry was performed. Our results showed that SiC effectively increased the mechanical properties of the nHA/Gel/SiC scaffold. No significant differences were observed in biocompatibility, cell adhesion, and cytotoxicity of the nHA/Gel/SiC in comparison with the nHA/Gel nanocomposite. Based on histological and immunohistochemical studies, both osteogenesis and collagenization were significantly higher in the rBM-MSCs/scaffold group, quantitatively and qualitatively. The present study strongly suggests the potential of SiC as an alternative strategy to improve the mechanical and biological properties of bone tissue engineering scaffolds, and shows that the pre-seeded nHA/Gel/SiC scaffold with rBM-MSCs improves osteogenesis in the engineered bone implant.

Application of a Promising Bone Graft Substitute in Bone Tissue Regeneration: Characterization, Biocompatibility, and In Vivo Animal Study

The purpose of the present study was to investigate the effect of local hydroxyapatite (HA) combined with extracted sea cucumber (Stichopus hermanni) collagen as a promising bone graft substitute on bone remodeling. Fourier-transform infrared spectroscopy, X-ray diffractometry, transmission electron microscopy, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and Sprague-Dawley rat model were used to characterize the microstructure, in vitro cytotoxicity, and in vivo bone-healing properties of the investigated biocomposite material. Analytical results found that the hydrothermal reaction-synthesized local HA had a hexagonal close-packed structure. The addition of extracted S. hermanni collagen did not influence the microstructure and functional groups of the local HA. Moreover, the MTT assay indicated that the investigated biocomposite material possessed a good in vitro biocompatibility. The in vivo animal study also revealed that the investigated biocomposite material exhibited the highest number of osteoblasts after 14 days of healing. Therefore, the results demonstrate that the local HA combined with extracted S. hermanni collagen could potentially enhance osteoblast formation in promoting bone healing and regeneration.

Acceleration of Bone Fracture Healing through the Use of Natural Bovine Hydroxyapatite Implant on Bone Defect Animal Model

Bone is an important organ for supports the body that stores reserve of calcium, phosphorus, and other minerals. In fracture conditions where bleeding, soft tissue edema, nerve damage, and blood vessels around the bone damage happen, they can cause the mobilization of these minerals in the surrounding tissue. One of the efforts made in the treatment of these fractures is reconnection, in which it works by filling of bone defect with a matrix and administration of anti-infection. Biomaterial filling in defective bone is thought to accelerate the healing process of bone fracture and prevent osteomyelitis. For this reason, this study evaluates the acceleration of bone fracture healing using natural hydroxyapatite (NHA) bone filler in rabbits with bone defect model. Fracture modeling was performed by surgical technique and drilling of bones with a 4.2 mm diameter to form a defect in the rabbit femur. Bone implant contained bovine hydroxyapatite-gelatin-glutaraldehyde (BHA implant) or bovine hydroxyapatite-gelatin-glutaraldehyde-gentamicin (BHA-GEN implant) that was inserted in bone defects. 27 rabbits were divided into 3 groups: the control group who had bone defect, the bone defect group was given BHA implant and the bone defect group was given BHA-GEN implant. Observation of osteoclast, osteoblast, osteocyte, BALP level, and bone morphological integrity was carried out on the 14th, 28th, and 42nd days after surgery. Histological observation of rabbit femur showed a significant difference on the number of osteoclast, osteoblast and osteocyte in all three groups. The BALP level also showed a significant difference in the group given the natural BHA bone implant compared to the control group on day 14 (p = 0.0361). Based on the result of the X-ray, there was also a better integration of rabbit femur bone in groups with the use of BHA or BHA-GEN bone implant. Thus, it can be concluded that the use of a natural BHA implant can accelerate the process of bone repair in the fracture of rabbit femur. In addition, BHA implants were compatible as a matrix for supporting the bone cell growth.

Using Chitosan Besides Nano Hydroxyapatite and Fluorohydroxyapatite Boost Dental Pulp Stem Cell Proliferation

The dental tissue scaffold must provide a favorable surface for dental pulp stem cell attachment and proliferation. Employing nanohydroxyapatite (HA) and nanofluorohydroxyapatite (FHA) beside synthetic and organic polymer in favor of scaffolds would be used in bone and dental tissue engineering. In this research, nanoHA and FHA/chitosan scaffolds were synthesized by freeze-drying technique. Surface morphology, chemical composition and hydrophilicity have a great impact on initial cell attachment which will further affect the cell viability and proliferation which evaluated by SEM, XRD and contact angle measurement. Bioactivity of scaffolds was investigated by immersion in simulated body fluid (SBF) and cell proliferation assay. In freeze-drying technique percentage usage of hydroxyapatite could be risen up to 40% and shown better macro-mechanical and physical properties and bioactivity. According to obtained results by adding chitosan, contact angle was decreased by %54 and %37 for polycaprolactone (PCL)/HA and PCL/FHA scaffolds. In addition, addition of chitosan causes significant increase in the cell proliferation for PCL/HA and PCL/FHA up to 81% and 164%, respectively. These results indicate that PCL/FHA/chitosan scaffold represent a big potential for dental tissue engineering.

Bioactivation Routes of Gelatin-Based Scaffolds to Enhance at Nanoscale Level Bone Tissue Regeneration

The present work is focused on the development of gelatin-based scaffolds crosslinked through carbodiimide reaction and their bioactivation by two different methods: (i) surface modification by inorganic signals represented by hydroxyapatite nanoparticles precipitated on scaffold through biomimetic treatment; (ii) analog of BMP-2 peptide decoration. The results showed the effects of polymer concentration and crosslinking time on the physico-chemical, morphological, and mechanical properties of scaffolds. Furthermore, a comparative study of biological response for both bioactivated structures allowed to evaluate the influence of inorganic and organic cues on cellular behavior in terms of adhesion, proliferation and early osteogenic marker expression. The bioactivation by inorganic cues induced positive cellular response compared to neat scaffolds in terms of increased cell proliferation and early osteogenic differentiation of human mesenchymal stem cell (hMSC), as evidenced by the Alkaline phosphatase (ALP) expression. Similarly BMP-2 peptide decorated scaffolds showed higher values of ALP than biomineralized ones at longer time. The overall results demonstrated that the presence of bioactive signals (either inorganic or organic) at nanoscale level allowed an osteoinductive effect on hMSC in a basal medium, making the modified gelatin scaffolds a promising candidate for bone tissue regeneration.

Nano-hydroxyapatite-alginate-gelatin microcapsule as a potential osteogenic building block for modular bone tissue engineering

To develop osteogenic building blocks for modular bone tissue engineering applications, influence of gelatin as cell adhesive molecule and nano-hydroxyapatite (nHA) as osteoconductive component was examined on alginate-based hydrogel properties and microencapsulated osteoblast-like cell behavior by using factorial experimental design technique. nHA and alginate showed a statistically significant impact on swelling reduction, and improvement of stability and mechanical strength of hydrogels, respectively. Gelatin influence, however, was in a reverse manner. nHA played imperative roles in promoting microencapsulated osteoblastic cell proliferation and function due to its bioactivity and mechanical strength improvement of hydrogels to the modulus range of mineralized bone tissue in vivo. The results and their statistical analysis also revealed the importance of interaction effect of gelatin and nHA. Proliferation and osteogenic function of the cells fluctuated with increasing gelatin concentration of microcapsules in the presence of nHA, demonstrating that hydrogel properties should be balanced to provide an efficient 3D osteoconductive microcapsule. Alginate (1%)-gelatin (2.5%)-nHA (0.5%) microcapsule with compressive modulus of 0.19 MPa ± 0.02, swelling ratio of 52% ± 8 (24 h) and degradation rate of 12% ± 4 (96 h) revealed a maximum performance for the cell proliferation and function, indicating a potential microcapsule composition to prepare building blocks for modular bone tissue engineering.

Bioperformance of chitosan/fluoride-doped diopside nanocomposite coatings deposited on medical stainless steel

This work focuses on the structure, bioactivity, corrosion, and biocompatibility characteristics of chitosan-matrix composites reinforced with various amounts of fluoride-doped diopside nanoparticles (at 20, 40, 60, and 80 wt%) deposited on stainless steel 316 L. Bioactivity studies reveal that the presence of the nanoparticles in the coatings induces apatite-forming ability to the surfaces. Based on electrochemical impedance spectroscopy and polarization experiments, the in vitro corrosion resistance of the substrate was enhanced by increasing the level of the nanoparticles in the coating. The sample containing 60% of the nanoparticles presented the highest osteoblast-like MG63 cell viability, in comparison to the other prepared and even control samples. Also, the cell attachment on the surfaces was improved with increasing the amount of the nanoparticles in the coatings. It is eventually concluded that the application of chitosan/fluoride-doped diopside nanocomposite coatings improves the bioperformance of metallic implants.

Healing potential of nanohydroxyapatite, gelatin, and fibrin-platelet glue combination as tissue engineered scaffolds in radial bone defects of rats

Different biomaterials have been used in orthopedic surgery. Evaluation of biomaterials for bone healing promotion has been a wide area of research of the orthopedic field. Sixty critical size defects of 5 mm long were bilaterally created in the radial diaphysis of 30 rats. The animals were randomly divided into six equal groups as empty defect, autograft, nanohydroxyapatite (nHA), Gelatin (Gel)-nHA, fibrin-platelet glue (FPG)-nHA, and Gel-FPG-nHA groups (n = 10 in each group). Radiographs of each forelimb were taken postoperatively on the 1st day and then at the 28th and 56th days post injury. After 56 days, the rats were euthanized and their harvested healing bone samples were evaluated by histopathology, scanning electron microscopy, and biomechanical testing. All the treated defects demonstrated significantly superior new bone formation, remodeling, and bone tissue volume. Moreover, the defects treated with FPG-nHA showed significantly higher ultimate load, yield load, and stiffness. The Gel-FPG-nHA moderately improved bone regeneration that was not close to the autograft in some parameters, whereas FPG-nHA significantly improved bone healing closely comparable with the autograft group in most parameters. In conclusion, although all the nHA-containing scaffolds had some beneficial effects on bone regeneration, the FPG-nHA scaffold was more effective in improving the structural and functional properties of the newly formed bone and was more osteoinductive than the Gel and was comparable to the autograft. Therefore, the FPG can be regarded as a promising option to be used in conjunction with mineral scaffolds for bone tissue engineering.

Gelatin/nano-hydroxyapatite hydrogel scaffold prepared by sol-gel technology as filler to repair bone defects

This study reports on the development of a scaffold with a gradient of bioactive solid signal embedded in the biodegradable polymer matrix by combining a sol-gel approach and freeze-drying technology. The chemical approach based on the sol-gel transition of calcium phosphates ensures the particles dispersion into the gelatin matrix and a direct control of interaction among COOH_gelatin /Ca²⁺ ions. Morphological analysis demonstrated that on the basis of the amount of inorganic component and by using specific process conditions, it is possible to control the spatial distribution of nanoparticles around the gelatin helix. In fact, methodology and formulations were able to discriminate between the different hydroxyapatite concentrations and their respective morphology. The good biological response represented by good cell attachment, proliferation and increased levels of alkaline phosphatase as an indicator of osteoblastic differentiation of human mesenchymal stem cells toward the osteogenic lineage, demonstrating the effect of bioactive solid signals on cellular behavior. Furthermore, the inhibition of reactive oxygen species production by composite materials predicted potential anti-inflammatory properties of scaffolds thus confirming their biocompatibility. Indeed, these interesting biological results suggest good potential application of this scaffold as filler to repair bone defects. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2007-2019, 2018.

Synthesis and Characterization of a Laminated Hydroxyapatite/Gelatin Nanocomposite Scaffold with Controlled Pore Structure for Bone Tissue Engineering

In this study, a nanostructured scaffold was designed for bone repair using hydroxyapatite (HA) and gelatin (GEL) as its main components. Nanopowders of HA were synthesized, and together with GEL, used to engineer a 3-dimensional nanocomposite combining 3 techniques of layer solvent casting, freeze-drying, and lamination. The results show that the scaffold possesses a 3-dimensional interconnected homogenous porous structure with a porosity of 82% and pore sizes ranging from 300 to 500 μm. It has also been shown that mechanical indices are in the range of spongy bones. Cultured osteoblast-like cells (SaOS-2) have shown an excellent level of cell attachment, migration, and penetration into the porosities of the nanocomposite scaffold. Here, we have shown that by a combination of widely available methods with simple experimental operations, nano-HA powders can be synthesized and used to make 3-dimensional HA/GEL nanocomposites in any desired shape, with mechanical properties comparable to spongy bone.

Preparation of dexamethasone-loaded biphasic calcium phosphate nanoparticles/collagen porous composite scaffolds for bone tissue engineering

Although bone is regenerative, its regeneration capacity is limited. For bone defects beyond a critical size, further intervention is required. As an attractive strategy, bone tissue engineering (bone TE) has been widely investigated to repair bone defects. However, the rapid and effective bone regeneration of large non-healing defects is still a great challenge. Multifunctional scaffolds having osteoinductivity and osteoconductivity are desirable to fasten functional bone tissue regeneration. In the present study, biomimetic composite scaffolds of collagen and biphasic calcium phosphate nanoparticles (BCP NPs) with a controlled release of dexamethasone (DEX) and the controlled pore structures were prepared for bone TE. DEX was introduced in the BCP NPs during preparation of the BCP NPs and hybridized with collagen scaffolds, which pore structures were controlled by using pre-prepared ice particulates as a porogen material. The composite scaffolds had well controlled and interconnected pore structures, high mechanical strength and a sustained release of DEX. The composite scaffolds showed good biocompatibility and promoted osteogenic differentiation of hMSCs when used for three-dimensional culture of human bone marrow-derived mesenchymal stem cells. Subcutaneous implantation of the composite scaffolds at the dorsa of athymic nude mice demonstrated that they facilitated the ectopic bone tissue regeneration. The results indicated the DEX-loaded BCP NPs/collagen composite scaffolds had high potential for bone TE.

STATEMENT OF SIGNIFICANCE

Scaffolds play a crucial role for regeneration of large bone defects. Biomimetic scaffolds having the same composition of natural bone and a controlled release of osteoinductive factors are desirable for promotion of bone regeneration. In this study, composite scaffolds of collagen and biphasic CaP nanoparticles (BCP NPs) with a controlled release nature of dexamethasone (DEX) were prepared and their porous structures were controlled by using ice particulates. In vitro cell culture and in vivo implantation experiments demonstrated the composite scaffolds exerted synergistic effects on the osteogenic differentiation of hMSCs and bone regeneration. The composite scaffolds also showed promotive effect on the formation of capillary blood vessels in the regenerated bone. This study is the first research to prepare DEX-loaded BCP NPs/collagen porous composite scaffolds. The superior performance of the composite scaffolds indicates the composite scaffolds should be useful for bone tissue engineering.

Modified gelatine structures as packaging material for frozen agricultural products

Gelatine gels modified by hydrated paper pulp (PP), ground extruded starch (ES) and hydrogel balls (HGB) were formed so that after the crosslinking process, the plates of suitable thickness could be obtained. Then the material was freeze-dried and the obtained porous gelatine structures as well as styrofoam (XPS) as the reference material were tested for thermal conductivity and bending. The temperature fields were examined during the thawing process of products placed inside the test packagings with modified gelatine structures and polystyrene as well as temperature field profile on outer surface of these packs. The studied materials resemble styrofoam in terms of thermal insulation and exhibited medium thermal conductivity ranging between 0.047 and 0.081 [W·(mK)-1]. The bending strength of the materials under investigation proved higher than that of styrofoam and this fact supports their applicability as an alternative for frozen agricultural products packages.

Multifunctional HA/Cu nano-coatings on titanium using PPy coordination and doping via pulse electrochemical polymerization

An anti-wear and antibacterial hydroxyapatite nanoparticle bioactive coating on a titanium matrix is fabricated through hydroxyapatite/copper nanoparticle co-deposition.

Biomimetic Materials and Fabrication Approaches for Bone Tissue Engineering

Various strategies have been explored to overcome critically sized bone defects via bone tissue engineering approaches that incorporate biomimetic scaffolds. Biomimetic scaffolds may provide a novel platform for phenotypically stable tissue formation and stem cell differentiation. In recent years, osteoinductive and inorganic biomimetic scaffold materials have been optimized to offer an osteo-friendly microenvironment for the osteogenic commitment of stem cells. Furthermore, scaffold structures with a microarchitecture design similar to native bone tissue are necessary for successful bone tissue regeneration. For this reason, various methods for fabricating 3D porous structures have been developed. Innovative techniques, such as 3D printing methods, are currently being utilized for optimal host stem cell infiltration, vascularization, nutrient transfer, and stem cell differentiation. In this progress report, biomimetic materials and fabrication approaches that are currently being utilized for biomimetic scaffold design are reviewed.

The Challenge in Using Mesenchymal Stromal Cells for Recellularization of Decellularized Cartilage

Some decellularized musculoskeletal extracellular matrices (ECM)s derived from tissues such as bone, tendon and fibrocartilaginous meniscus have already been clinical use for tissue reconstruction. Repair of articular cartilage with its unique zonal ECM architecture and composition is still an unsolved problem, and the question is whether allogenic or xenogeneic decellularized cartilage ECM could serve as a biomimetic scaffold for this purpose.Hence, this survey outlines the present state of preparing decellularized cartilage ECM-derived scaffolds or composites for reconstruction of different cartilage types and of reseeding it particularly with mesenchymal stromal cells (MSCs).The preparation of natural decellularized cartilage ECM scaffolds hampers from the high density of the cartilage ECM and lacking interconnectivity of the rather small natural pores within it: the chondrocytes lacunae. Nevertheless, the reseeding of decellularized ECM scaffolds before implantation provided superior results compared with simply implanting cell-free constructs in several other tissues, but cartilage recellularization remains still challenging. Induced by cartilage ECM-derived scaffolds MSCs underwent chondrogenesis.Major problems to be addressed for the application of cell-free cartilage were discussed such as to maintain ECM structure, natural chemistry, biomechanics and to achieve a homogenous and stable cell recolonization, promote chondrogenic and prevent terminal differentiation (hypertrophy) and induce the deposition of a novel functional ECM. Some promising approaches were proposed including further processing of the decellularized ECM before recellularization of the ECM with MSCs, co-culturing of MSCs with chondrocytes and establishing bioreactor culture e.g. with mechanostimulation, flow perfusion pressure and lowered oxygen tension. Graphical Abstract Synopsis of tissue engineering approaches based on cartilage-derived ECM.

Hierarchically porous structure, mechanical strength and cell biological behaviors of calcium phosphate composite scaffolds prepared by combination of extrusion and porogen burnout technique and enhanced by gelatin

In this study, hierarchically porous calcium phosphate scaffolds (HTCP) with unidirectional pores, transversely interconnected pores, and micropores were fabricated by the combination of extrusion and porogen burnout technique. Gelatin was incorporated into the HTCP scaffolds by vacuum-impregnation of gelatin solution and subsequent freeze-drying. The phase composition, microstructure, physical and cytobiological properties were analyzed. The results showed that the HTCP scaffolds were composed of β-tricalcium phosphate with minor hydroxyapatite. The HTCP scaffolds had unidirectional pores (~400μm), transversely interconnected pores (~130μm) and micropores (~1μm). The incorporation of gelatin significantly increased the compressive strength, toughness, and cell seeding of the HTCP scaffolds. The composite scaffolds showed excellent cytocompatibility. The hierarchically porous calcium phosphate composite scaffolds may have potential application prospects in bone tissue engineering.

A gelatin composite scaffold strengthened by drug-loaded halloysite nanotubes

Mechanical properties and anti-infection are two of the most concerned issues for artificial bone grafting materials. Bone regeneration porous scaffolds with sustained drug release were developed by freeze-drying the mixture of nanosized drug-loaded halloysite nanotubes (HNTs) and gelatin. The scaffolds showed porous structure and excellent biocompatibility. The mechanical properties of the obtained composite scaffolds were enhanced significantly by HNTs to >300%, comparing to those of gelatin scaffold, and match to those of natural cancellous bones. The ibuprofen-loaded HNTs incorporated in the scaffolds allowed extended drug release over 100h, comparing to 8h when directly mixed the drug into the gelatin scaffold. The biological properties of the composite scaffolds were investigated by culturing MG63 cells on them. The HNTs/gelatin scaffolds with excellent mechanical properties and sustained drug release could be a promising artificial bone grating material.

Novel layered double hydroxides-hydroxyapatite/gelatin bone tissue engineering scaffolds: Fabrication, characterization, and in vivo study

Developing porous biodegradable scaffolds through simple methods is one of the main approaches of bone tissue engineering (BTE). In this work, a novel BTE composite containing layered double hydroxides (LDH), hydroxyapatite (HA) and gelatin (GEL) was fabricated using co-precipitation and solvent-casting methods. Physiochemical characterizations showed that the chemical composition and microstructure of the scaffolds were similar to the natural spongy bone. Interconnected macropores ranging over 100 to 600μm were observed for both scaffolds while the porosity of 90±0.12% and 92.11±0.15%, as well as, Young's modulus of 19.8±0.41 and 12.5±0.35GPa were reported for LDH/GEL and LDH-HA/GEL scaffolds, respectively. The scaffolds were degraded in deionized water after a month. The SEM images revealed that between two scaffolds, the LDH-HA/GEL with needle-like secondary HA crystals showed better bioactivity. According to the alkaline phosphatase activity and Alizarin red staining results, LDH-HA/GEL scaffolds demonstrated better bone-specific activities comparing to LDH/Gel scaffold as well as control sample (P<0.05). The rabbit adipose stem cells (ASCs) were extracted and cultured, then seeded on the LDH-HA/GEL scaffolds after confluence. Three groups of six adult rabbits were prepared: the scaffold+ASCs group, the empty scaffold group and the control group. The critical defects were made on the left radius and the scaffolds with or without ASCs were implanted there while the control group was left without any treatment. All animals were sacrificed after 12weeks. Histomorphometric results showed that the regeneration of defects was accelerated by scaffold implantation but ASC-seeding significantly improved the quality of new bone formation (P<0.05). The results confirmed the good performance of LDH-HA/GEL scaffold to induce bone regeneration.

Fabrication of Antibacterial and Antiwear Hydroxyapatite Coatings via In Situ Chitosan-Mediated Pulse Electrochemical Deposition

Although bioinert titanium has been widely applied in orthopedics and related fields, its usage is limited by its unsatisfying osteoinductivity, anti-infection capability, and wear-resistance. Osteoinductive apatite coating can be fabricated on a titanium surface by electrochemical methods, but this causes bacterial adhesion and poor wear-resistance. On the basis of pulse electrochemical technology, a wear-resistance and antibacterial osteoinductive coating was fabricated through codeposition of hydroxyapatite (HA) and nano-Ag effectuated by the cohybridization ofchitosan (CS) with Ag⁺ and Ca²⁺. A composite coating formed with uniformly dispersed spherical nanoparticles was obtained at optimized deposition potential, Ag concentration, and apatite concentration. The nanocomposite coating shows excellent bioinductive activity; it promotes preferential growth on the (002) face, and needle-like ordered arrangement of apatite. Due to the mediation of CS hybridization, a compact structure is achieved in the HA/Ag composite coating which significantly enhances the wear-resistance of the coating and reduces the release of Ca²⁺ and Ag⁺. The antibacterial rate of the coating on Escherichia coli and Staphylococcus aureus is up to 99% according to the antibacterial test. In conclusion, a wear-resistant and long-term antibacterial bioactive nanocomposite coating is successfully fabricated on titanium surface through the strategy established in this study.

Osteoblast-seeded bioglass/gelatin nanocomposite: a promising bone substitute in critical-size calvarial defect repair in rat

INTRODUCTION

Amid the plethora of methods to repair critical bone defects, there is no one perfect approach. In this study, we sought to evaluate a potent 3-dimensional (3D) bioactive SiO2-CaO-P2O5 glasses (bioglass)/gelatin (gel) scaffold for its biocompatibility by seeding cells as well as for its regenerative properties by animal implantation.

METHODS

Osteoblast cells were seeded onto nanocomposite scaffolds to investigate the process of critical-size calvarial defect via new bone formation. Scanning electron microscopy (SEM) was used to validate topography of the scaffolds, its homogeneity and ideal cellular attachment. Proliferation assay and confocal microscopy were used to evaluate its biocompatibility. To validate osteogenesis of the bioactive nanocomposite scaffolds, they were first implanted into rats and later removed and analyzed at different time points post mortem using histological, immunohistochemical and histomorphometric methods.

RESULTS

Based on in vitro results, we showed that our nanocomposite is highly cell-compatible material and allows for osteoblasts to adhere, spread and proliferate. In vivo results indicate that our nanocomposite provides a significant contribution to bone regeneration and is highly biodegradable and biocompatible. So, seeded scaffolds with osteoblasts enhanced repair of critical bone defects via osteogenesis.

CONCLUSIONS

We demonstrate the feasibility of engineering a nanocomposite scaffold with an architecture resembling the human bone, and provide proof-of-concept validation for our scaffold using a rat animal model.

Biomimetic Scaffold with Aligned Microporosity Designed for Dentin Regeneration

Tooth loss is a common result of a variety of oral diseases due to physiological causes, trauma, genetic disorders, and aging and can lead to physical and mental suffering that markedly lowers the individual's quality of life. Tooth is a complex organ that is composed of mineralized tissues and soft connective tissues. Dentin is the most voluminous tissue of the tooth and its formation (dentinogenesis) is a highly regulated process displaying several similarities with osteogenesis. In this study, gelatin, thermally denatured collagen, was used as a promising low-cost material to develop scaffolds for hard tissue engineering. We synthetized dentin-like scaffolds using gelatin biomineralized with magnesium-doped hydroxyapatite and blended it with alginate. With a controlled freeze-drying process and alginate cross-linking, it is possible to obtain scaffolds with microscopic aligned channels suitable for tissue engineering. 3D cell culture with mesenchymal stem cells showed the promising properties of the new scaffolds for tooth regeneration. In detail, the chemical-physical features of the scaffolds, mimicking those of natural tissue, facilitate the cell adhesion, and the porosity is suitable for long-term cell colonization and fine cell-material interactions.

Establishment of a Cytocompatible Cell-Free Intervertebral Disc Matrix for Chondrogenesis with Human Bone Marrow-Derived Mesenchymal Stromal Cells

Tissue-engineered intervertebral discs (IVDs) utilizing decellularized extracellular matrix (ECM) could be an option for the reconstruction of impaired IVDs due to degeneration or injury. The objective of this study was to prepare a cell-free decellularized human IVD scaffold and to compare neotissue formation in response to recellularization with human IVD cells (hIVDCs) or human bone marrow-derived (hBM) mesenchymal stromal cells (MSCs). IVDs were decellularized via freeze-thaw cycles, detergents and trypsin. Histological staining was performed to monitor cell removal and glycosaminoglycan (GAG) removal. The decellularized IVD was preconditioned using bovine serum albumin and fetal bovine serum before its cytocompatibility for dynamically cultured hBM-MSCs (chondrogenically induced or not) and hIVDCs was compared after 14 days. In addition, DNA, total collagen and GAG contents were assessed. The decellularization protocol achieved maximal cell removal, with only few remaining cell nuclei compared with native tissue, and low toxicity. The DNA content was significantly higher in scaffolds seeded with hIVDCs compared with native IVDs, cell-free and hBM-MSC-seeded scaffolds (p < 0.01). The GAG content in the native tissue was significantly higher compared to the others groups except for the scaffolds reseeded with chondrogenically induced hBM-MSCs (p < 0.05). In addition, there was a significantly increased total collagen content in the chondrogenically induced hBM-MSCs group (p < 0.01) compared with the native IVDs, cell-free and hIVDC-seeded scaffolds (p < 0.01); both recolonizing cell types were more evenly distributed on the scaffold surface, but only few cells penetrated the scaffold. The resulting decellularized ECM was cytocompatible and allowed hBM-MSCs/hIVDCs survival and ECM production.

Production of new 3D scaffolds for bone tissue regeneration by rapid prototyping

The incidence of bone disorders, whether due to trauma or pathology, has been trending upward with the aging of the worldwide population. The currently available treatments for bone injuries are rather limited, involving mainly bone grafts and implants. A particularly promising approach for bone regeneration uses rapid prototyping (RP) technologies to produce 3D scaffolds with highly controlled structure and orientation, based on computer-aided design models or medical data. Herein, tricalcium phosphate (TCP)/alginate scaffolds were produced using RP and subsequently their physicochemical, mechanical and biological properties were characterized. The results showed that 60/40 of TCP and alginate formulation was able to match the compression and present a similar Young modulus to that of trabecular bone while presenting an adequate biocompatibility. Moreover, the biomineralization ability, roughness and macro and microporosity of scaffolds allowed cell anchoring and proliferation at their surface, as well as cell migration to its interior, processes that are fundamental for osteointegration and bone regeneration.

Biomimetic matrix mediated room temperature synthesis and characterization of nano-hydroxyapatite towards targeted drug delivery

Nucleation and growth of hydroxyapatite nanoparticles in the presence of different matrices acting as a potent drug delivery vehicle.

Relevance of fiber integrated gelatin-nanohydroxyapatite composite scaffold for bone tissue regeneration

Porous nanohydroxyapatite (nanoHA) is a promising bone substitute, but it is brittle, which limits its utility for load bearing applications. To address this issue, herein, biodegradable electrospun microfibrous sheets of poly(L-lactic acid)-(PLLA)-polyvinyl alcohol (PVA) were incorporated into a gelatin-nanoHA matrix which was investigated for its mechanical properties, the physical integration of the fibers with the matrix, cell infiltration, osteogenic differentiation and bone regeneration. The inclusion of sacrificial fibers like PVA along with PLLA and leaching resulted in improved cellular infiltration towards the center of the scaffold. Furthermore, the treatment of PLLA fibers with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide enhanced their hydrophilicity, ensuring firm anchorage between the fibers and the gelatin-HA matrix. The incorporation of PLLA microfibers within the gelatin-nanoHA matrix reduced the brittleness of the scaffolds, the effect being proportional to the number of layers of fibrous sheets in the matrix. The proliferation and osteogenic differentiation of human adipose-derived mesenchymal stem cells was augmented on the fibrous scaffolds in comparison to those scaffolds devoid of fibers. Finally, the scaffold could promote cell infiltration, together with bone regeneration, upon implantation in a rabbit femoral cortical defect within 4 weeks. The bone regeneration potential was significantly higher when compared to commercially available HA (Surgiwear™). Thus, this biomimetic, porous, 3D composite scaffold could be offered as a promising candidate for bone regeneration in orthopedics.