Evaluation of modifying collagen matrix with RGD peptide through periodate oxidation

Green biomanufacturing in recombinant collagen biosynthesis: trends and selection in various expression systems

Collagen, classically derived from animal tissue, is an all-important protein material widely used in biomedical materials, cosmetics, fodder, food, etc. The production of recombinant collagen through different biological expression systems using bioengineering techniques has attracted significant interest in consideration of increasing market demand and the process complexity of extraction. Green biomanufacturing of recombinant collagen has become one of the focus topics. While the bioproduction of recombinant collagens (type I, II, III, etc.) has been commercialized in recent years, the biosynthesis of recombinant collagen is extremely challenging due to protein immunogenicity, yield, degradation, and other issues. The rapid development of synthetic biology allows us to perform a heterologous expression of proteins in diverse expression systems, thus optimizing the production and bioactivities of recombinant collagen. This review describes the research progress in the bioproduction of recombinant collagen over the past two decades, focusing on different expression systems (prokaryotic organisms, yeasts, plants, insects, mammalian and human cells, etc.). We also discuss the challenges and future trends in developing market-competitive recombinant collagens.

Engineered M13 Nanofiber Accelerates Ischemic Neovascularization by Enhancing Endothelial Progenitor Cells

Dysfunction or loss of blood vessel causes several ischemic diseases. Although endothelial progenitor cells (EPCs) are a promising source for cell-based therapy, ischemia-induced pathophysiological condition limits the recovery rate by causing drastic cell death. To overcome this issue, we attempted to develop a cell-targeted peptide delivery and priming system to enhance EPC-based neovascularization using an engineered M13 bacteriophage harboring nanofibrous tubes displaying ~2700 multiple functional motifs. The M13 nanofiber was modified by displaying RGD, which is an integrin-docking peptide, on the minor coat protein, and by mutilayering SDKP motifs, which are the key active sites for thymosin β4, on the major coat protein. The engineered M13 nanofiber dramatically enhanced ischemic neovascularization by activating intracellular and extracellular processes such as proliferation, migration, and tube formation in the EPCs. Furthermore, transplantation of the primed EPCs with the M13 nanofiber harboring RGD and SDKP facilitated functional recovery and neovascularization in a murine hindlimb ischemia model. Overall, this study demonstrates the effectiveness of the M13 nanofiber-based novel peptide delivery and priming strategy in promoting EPC bioactivity and neovessel regeneration. To our knowledge, this is first report on M13 nanofibers harboring dual functional motifs, the use of which might be a novel strategy for stem and progenitor cell therapy against cardiovascular ischemic diseases.

Recombinant laminin fragments endowed with collagen-binding activity: A tool for conferring laminin-like cell-adhesive activity to collagen matrices

Laminins are major components of basement membranes that sustain a wide variety of stem cells. Among 15 laminin isoforms, laminin-511 and its E8 fragment (LM511E8) have been shown to strongly promote the adhesion and proliferation of human pluripotent stem cells. The aim of this study was to endow the cell-adhesive activity of laminin-511 on collagen matrices, thereby fabricating collagen-based culture scaffolds for stem cells with defined composition. To achieve this goal, we utilized the collagen-binding domain (CBD) of fibronectin to immobilize LM511E8 on collagen matrices. CBD was attached to the N-termini of individual laminin chains (α5E8, β1E8, γ1E8), producing LM511E8s having one, two, or three CBDs. While LM511E8 did not bind to collagen, CBD-attached LM511E8s (CBD-LM511E8s) exhibited significant collagen-binding activity, dependent on the number of attached CBDs. Human iPS cells were cultured on collagen-coated plates preloaded with CBD-LM511E8s. Although iPS cells did not attach or grow on collagen, they robustly proliferated on CBD-LM511E8-loaded collagen matrices, similar to the case with LM511E8-coated plates. Importantly, iPS cells proliferated and yielded round-shaped colonies even on collagen gels preloaded with CBD-LM511E8s. These results demonstrate that CBD-attached laminin E8 fragments are promising tools for fabrication of collagen-based matrices having the cell-adhesive activity of laminins.

RGD peptide and graphene oxide co-functionalized PLGA nanofiber scaffolds for vascular tissue engineering

In recent years, much research has been suggested and examined for the development of tissue engineering scaffolds to promote cellular behaviors. In our study, RGD peptide and graphene oxide (GO) co-functionalized poly(lactide-co-glycolide, PLGA) (RGD-GO-PLGA) nanofiber mats were fabricated via electrospinning, and their physicochemical and thermal properties were characterized to explore their potential as biofunctional scaffolds for vascular tissue engineering. Scanning electron microscopy images revealed that the RGD-GO-PLGA nanofiber mats were readily fabricated and composed of random-oriented electrospun nanofibers with average diameter of 558 nm. The successful co-functionalization of RGD peptide and GO into the PLGA nanofibers was confirmed by Fourier-transform infrared spectroscopic analysis. Moreover, the surface hydrophilicity of the nanofiber mats was markedly increased by co-functionalizing with RGD peptide and GO. It was found that the mats were thermally stable under the cell culture condition. Furthermore, the initial attachment and proliferation of primarily cultured vascular smooth muscle cells (VSMCs) on the RGD-GO-PLGA nanofiber mats were evaluated. It was revealed that the RGD-GO-PLGA nanofiber mats can effectively promote the growth of VSMCs. In conclusion, our findings suggest that the RGD-GO-PLGA nanofiber mats can be promising candidates for tissue engineering scaffolds effective for the regeneration of vascular smooth muscle.

Cell-adhesive RGD peptide-displaying M13 bacteriophage/PLGA nanofiber matrices for growth of fibroblasts

Background

M13 bacteriophages can be readily fabricated as nanofibers due to non-toxic bacterial virus with a nanofiber-like shape. In the present study, we prepared hybrid nanofiber matrices composed of poly(lactic-co-glycolic acid, PLGA) and M13 bacteriophages which were genetically modified to display the RGD peptide on their surface (RGD-M13 phage).

Results

The surface morphology and chemical composition of hybrid nanofiber matrices were characterized by scanning electron microscopy (SEM) and Raman spectroscopy, respectively. Immunofluorescence staining was conducted to investigate the existence of M13 bacteriophages in RGD-M13 phage/PLGA hybrid nanofibers. In addition, the attachment and proliferation of three different types of fibroblasts on RGD-M13 phage/PLGA nanofiber matrices were evaluated to explore how fibroblasts interact with these matrices. SEM images showed that RGD-M13 phage/PLGA hybrid matrices had the non-woven porous structure, quite similar to that of natural extracellular matrices, having an average fiber diameter of about 190 nm. Immunofluorescence images and Raman spectra revealed that RGD-M13 phages were homogeneously distributed in entire matrices. Moreover, the attachment and proliferation of fibroblasts cultured on RGD-M13 phage/PLGA matrices were significantly enhanced due to enriched RGD moieties on hybrid matrices.

Conclusions

These results suggest that RGD-M13 phage/PLGA matrices can be efficiently used as biomimetic scaffolds for tissue engineering applications.

Development of novel three-dimensional printed scaffolds for osteochondral regeneration

As modern medicine advances, various methodologies are being explored and developed in order to treat severe osteochondral defects in joints. However, it is still very challenging to cure the osteochondral defects due to their poor inherent regenerative capacity, complex stratified architecture, and disparate biomechanical properties. The objective of this study is to create novel three-dimensional (3D) printed osteochondral scaffolds with both excellent interfacial mechanical properties and biocompatibility for facilitating human bone marrow mesenchymal stem cell (MSC) growth and chondrogenic differentiation. For this purpose, we designed and 3D printed a series of innovative bi-phasic 3D models that mimic the osteochondral region of articulate joints. Our mechanical testing results showed that our bi-phasic scaffolds with key structures have enhanced mechanical characteristics in compression (a maximum Young's modulus of 31 MPa) and shear (a maximum fracture strength of 5768 N/mm(2)) when compared with homogenous designs. These results are also correlated with numerical simulation. In order to improve their biocompatibility, the scaffolds' surfaces were further modified with acetylated collagen (one of the main components in osteochondral extracellular matrix). MSC proliferation results demonstrated that incorporation of a collagen, along with biomimetically designed micro-features, can greatly enhance MSC growth after 5 days in vitro. Two weeks' chondrogenic differentiation results showed that our novel scaffolds (dubbed "key" scaffolds), both with and without surface collagen modification, displayed enhanced chondrogenesis (e.g., 130%, 114%, and 236% increases in glycosaminoglycan, type II collagen deposition, and total protein content on collagen-modified key scaffolds when compared with homogeneous controls).

Novel collagen scaffolds prepared by using unnatural D-amino acids assisted EDC/NHS crosslinking

This work discusses the preparation and characterization of novel collagen scaffolds by using unnatural D-amino acids (Coll-D-AAs)-assisted 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC)/N-hydroxyl succinimide(NHS)-initiated crosslinking. The mechanical strength, hydrothermal and structural stability, resistance to biodegradation and the biocompatibility of Coll-D-AAs matrices were investigated. The results from Thermo mechanical analysis, Differential scanning calorimetric analysis and Thermo gravimetric analysis of the Coll-D-AAs matrices indicate a significant increase in the tensile strength (TS, 180±3), % elongation (% E, 80±9), elastic modulus (E, 170±4) denaturation temperature (T d, 108±4) and a significant decrease in decomposition rate (Tg, 64±6). Scanning electron microscopic and Atomic force microscopic analyses revealed a well-ordered with properly oriented and well-aligned structure of the Coll-D-AAs matrices. FT-IR results suggest that the incorporation of D-AAs favours the molecular stability of collagen matrix. The D-AAs stabilizing the collagen matrices against degradation by collagenase would have been brought about by protecting the active sites in collagen. The Coll-D-AAs matrices have good biocompatibility when compared with native collagen matrix. Molecular docking studies also indicate better understanding of bonding pattern of collagen with D-AAs. These Coll-D-AAs matrices have been produced in high mechanical strength, thermally and biologically stable, and highly biocompatible forms that can be further manipulated into the functional matrix suitable in designing scaffolds for tissue engineering and regenerative medical applications.

Effects of crystalline phase on the biological properties of collagen-hydroxyapatite composites

The objective of this study was to investigate the effects of spatial structure and crystalline phase on the biological performance of collagen-hydroxyapatite (Col-HA) composite prepared by biomineralization crystallization. Two types of Col-HA composites were prepared using mineralization crystallization (MC composites) and pre-crystallization (PC composites), respectively. Structural characteristics were analyzed by scanning electron microscopy and transmission electron microscopy. Surface elemental compositions were measured by electron spectroscopy for chemical analysis (ESCA). These composites were used in in vivo repair of bone defects. The effects of the crystalline phase on the biological performance of Col-HA composites were investigated using radionuclide bone scan, histopathology and morphological observation. It was observed that in MC composites, HA was located on the surface of the collagen fibers and aggregated into crystal balls, whereas HA in PC composites was scattered among the collagen fibers. ESCA showed that phosphorus and calcium were 8.99% and 17.56% on MC composite surface, compared with 4.39% and 5.86% on the PC composite surface. In vivo bone defect repair experiments revealed that radionuclide uptake was significantly higher in the area implanted with the PC composite than in the contralateral area implanted with the MC composite. Throughout the whole repair process, the PC composite proved to be superior to the MC composite with regard to capillary-forming capacity and the amount of newly formed bone tissue. So it could be concluded that HA placement on collagen fibers affected the biological performance of Col-HA composites. Pre-crystallization made HA scattered among collagen fibers, creating a better structure for bone defect repair in comparison with MC Col-HA composites.

Effect of chondroitin sulfate modification on rhBMP-2 release kinetics from collagen delivery system

Protein delivery systems focus on protecting the protein that directly affects release kinetics. This study was carried out to determine the effect of surface polar group and fiber structure in a recombinant human bone morphogenetic protein-2 (rhBMP-2) protecting system based on a collagen matrix on its pharmacokinetics (PK) and osteoinductive activity In this study, two types of collagen carriers were made for rhBMP-2 protecting system. The PKs of rhBMPs within collagen (Col) and collagen-chondroitin sulfate (Col-CS) carriers were determined using (125)I-labeled proteins in rat ectopic assay. The two carriers were characterized with surface energy and hydrophilicity. We observed that the osteoinductivity of these two scaffolds seemed to depend on two parameters: the nature of the carrier material and the release kinetics of the carriers. Results indicated that with CS modification, the initial burst release of rhBMP-2 from Col-CS scaffold was much higher than collagen scaffold. The subsequent PKs at longer times were not strongly dependent on the carriers. These differences were expected to affect the osteoinductive activity of the implants. It was concluded that surface energy played a significant role in the release PK of implanted rhBMP and higher initial burst is favorable to bone regeneration near the matrix.

Haptide-coated collagen sponge as a bioactive matrix for tissue regeneration

We previously described a new class of conserved, cell adhesive (haptotactic) peptides, termed Haptides, based on sequences first identified in fibrinogen. Here, we describe a new biomaterial, Haptide-coated Collagen, in which the carbodiimide reagent, EDC, was used to covalently couple a Haptide (preC gamma), equivalent to the carboxy terminus of the fibrinogen gamma chain, to a cross-linked sponge composed of bovine collagen type I. The dose response of Haptide bound to collagen on cell attachment response reached a plateau at a concentration of 5-10 mg Haptide/g collagen. The Haptized-collagen was more stable to 1N NaOH, with a degradation half-time (T(1/2)) of 1.7 h, compared to 0.9 h for untreated control. Haptized collagen discs could be loaded with approximately 30% more human dermal fibroblasts or bovine aortic endothelial cells than unmodified collagen discs (p < 0.001). After a proliferation phase, Haptized collagen discs contained approximately 45% more fibroblasts than non-Haptized discs (p < 0.01). Histological analysis following sub-dermal implantation in rats indicated that at day 8, Haptized collagen sponge was less degraded than unmodified collagen sponge, attracted more endogenous fibroblasts with newly deposited collagen, and provoked less inflammatory or other adverse reactions. These results suggest potential clinical applications for Haptized collagen sponge for tissue regeneration, soft tissue augmentation, skin repair, and wound healing.

Improved Mesenchymal Stem Cell Seeding on RGD-Modified Poly(L-lactic acid) Scaffolds using Flow Perfusion

Arg-Gly-Asp (RGD) has been widely utilized to increase cell adhesion to three-dimensional scaffolds for tissue engineering. However, cell seeding on these scaffolds has only been carried out statically, which yields low cell seeding efficiencies. We have characterized, for the first time, the seeding of rat mesenchymal stem cells on RGD-modified poly(L-lactic acid) (PLLA) foams using oscillatory flow perfusion. The incorporation of RGD on the PLLA foams improves scaffold cellularity in a dose-dependent manner under oscillatory flow perfusion seeding. When compared to static seeding, oscillatory flow perfusion is the most efficient seeding technique. Cell detachment studies show that cell adhesion is dependent on the applied flow rate, and that cell attachment is strengthened at higher levels of RGD modification.

Scaffolds, Stem Cells, and Tissue Engineering: A Potent Combination!

Stem cells, either from embryonic or adult sources, have demonstrated the potential to differentiate into a wide range of tissues depending on culture conditions. This makes them prime candidates for use in tissue engineering applications. Current technology allows us to process biocompatible and biodegradable polymers into three-dimensional (3D) configurations, either as solid porous scaffolds or hydrogels, with controlled macro and/or micro spatial geometry and surface chemistry. Such control provides us with the ability to present highly controlled microenvironments to a chosen cell type. However, the precise microenvironments required for optimal expansion and/or differentiation of stem cells are only now being elucidated, and hence the controlled use of stem cells in tissue engineering remains a very young field. We present here a brief review of the current literature detailing interactions between stem cells and 3D scaffolds of varying morphology and chemical properties, concluding with remaining challenges for those interested in tissue engineering using tailored scaffolds and stem cells.