Combined radiofrequency ablation and doxorubicin-eluting polymer implants for liver cancer treatment

Microneedle patch capable of dual drug release for drug delivery to brain tumors

Primary brain tumors are mostly managed using surgical resection procedures. Nevertheless, in certain cases, a thin layer of tumors may remain outside of the resection process due to the possibility of permanent injury; these residual tumors expose patients to the risk of tumor recurrence. This study has introduced the use of microneedle patches implanted after surgery with a dual-release mechanism for the administration of doxorubicin. The proposed patches possess the capability to administer drugs directly to the residual tumors and initiate chemotherapy immediately following surgical procedures. Three-dimensional simulation of drug delivery to residual tumors in the brain has been performed based on a finite element method. The impact of four important parameters on drug delivery has been investigated, involving the fraction of drug released in the burst phase, the density of microneedles on the patch, the length of microneedles, and the microvascular density of the tumor. The simulation findings indicate that lowering the fraction of drug released in the initial burst phase reduces the maximum average concentration, but the sustained release that continues for a longer period, increasing the bioavailability of free drug. However, the area under curve (AUC) for different release rates remains unchanged due to the fact that an identical dose of drug is supplied in each instance. By increasing the density of microneedles on the patch, concentration accumulation is provided over an extensive region of tumor, which in turn induces more cancer cell death. A comparative analysis of various lengths reveals that longer microneedles facilitate profound penetration into the tumor layers and present better therapeutic response due to extensive area of the tumor which is exposure to chemotherapeutic drugs. Furthermore, high microvascular density, as a characteristic of the tumor microenvironment, is shown to have a significant impact on the blood microvessels drainage of drugs and consequently lower therapeutic response outcome. Our approach offers a computational framework for creating localized drug delivery systems and addressing the challenges related to residual brain tumors.

Localized delivery of immunotherapeutics: A rising trend in the field

Immunotherapy is becoming a new standard of care for multiple cancers, while several limitations are impending its further clinical success. Immunotherapeutic agents often have inappropriate pharmacokinetics on their own and/or exhibit limited specificity to tumor cells, leading to severe immuno-related adverse effects and limited efficacy. Suitable formulating strategies that confer prolonged contact with or efficient proliferation in tumors while reducing exposure to normal tissues are highly worthy to explore. With the assistance of biomaterial carriers, targeted therapy can be achieved artificially by implanting or injecting drug depots into desired sites, about which the wisdoms in literature have been rich. The relevant results have suggested a "local but systemic" effect, that is, local replenishment of immune modulators achieves a high treatment efficacy that also governs distant metastases, thereby building another rationale for localized delivery. Particularly, implantable scaffolds have been further engineered to recruit disseminated tumor cells with an efficiency high enough to reduce tumor burdens at typical metastatic organs, and simultaneously provide diagnostic signals. This review introduces recent advances in this emerging area along with a perspective on the opportunities and challenges in the way to clinical application.

Modelling of combination therapy using implantable anticancer drug delivery with thermal ablation in solid tumor

Local implantable drug delivery system (IDDS) can be used as an effective adjunctive therapy for solid tumor following thermal ablation for destroying the residual cancer cells and preventing the tumor recurrence. In this paper, we develop comprehensive mathematical pharmacokinetic/pharmacodynamic (PK/PD) models for combination therapy using implantable drug delivery system following thermal ablation inside solid tumors with the help of molecular communication paradigm. In this model, doxorubicin (DOX)-loaded implant (act as a transmitter) is assumed to be inserted inside solid tumor (acts as a channel) after thermal ablation. Using this model, we can predict the extracellular and intracellular concentration of both free and bound drugs. Also, Impact of the anticancer drug on both cancer and normal cells is evaluated using a pharmacodynamic (PD) model that depends on both the spatiotemporal intracellular concentration as well as characteristics of anticancer drug and cells. Accuracy and validity of the proposed drug transport model is verified with published experimental data in the literature. The results show that this combination therapy results in high therapeutic efficacy with negligible toxicity effect on the normal tissue. The proposed model can help in optimize development of this combination treatment for solid tumors, particularly, the design parameters of the implant.

Simultaneous linear release of folic acid and doxorubicin from ethyl cellulose/chitosan/g-C3 N4 /MoS2 core-shell nanofibers and its anticancer properties

The folic acid (FA) and doxorubicin (DOX) have been doped into the g-C₃ N₄ /MoS₂ incorporated-chitosan/ethyl cellulose (EC) core-shell nanofibers for targeted delivery of FA and DOX against HeLa and MCF-7 cell lines. The g-C₃ N₄ /MoS₂ nanosheets and core-shell nanofibers were characterized using Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and UV-Vis tests. The drug loading factor, the degradation rate, and the DOX and FA release behavior from core-shell nanofibers have been investigated. The pharmacokinetic results revealed the linear release with non-Fickian diffusion of the both anticancer drugs from nanofibers during 7 days. The DAPI staining and MTT assays of the nanofibers immersed in MCF-7 and HeLa cell lines were studied to determine the potential of DOX and FA doped-core-shell nanofibrous matrix for MCF-7 and HeLa cells death in vitro. The maximum MCF-7 and HeLa cells death percentages were found to be 89 and 85%, respectively, using EC/chitosan/g-C₃ N₄ /MoS₂ /DOX/FA core-shell nanofibers after 7 days. The high activity of g-C₃ N₄ /MoS₂ /DOX/FA loaded-core-shell nanofibers for studied cancer cells killing was achieved.

Liver Cancer: Current and Future Trends Using Biomaterials

Hepatocellular carcinoma (HCC) is the fifth most common type of cancer diagnosed and the second leading cause of death worldwide. Despite advancement in current treatments for HCC, the prognosis for this cancer is still unfavorable. This comprehensive review article focuses on all the current technology that applies biomaterials to treat and study liver cancer, thus showing the versatility of biomaterials to be used as smart tools in this complex pathologic scenario. Specifically, after introducing the liver anatomy and pathology by focusing on the available treatments for HCC, this review summarizes the current biomaterial-based approaches for systemic delivery and implantable tools for locally administrating bioactive factors and provides a comprehensive discussion of the specific therapies and targeting agents to efficiently deliver those factors. This review also highlights the novel application of biomaterials to study HCC, which includes hydrogels and scaffolds to tissue engineer 3D in vitro models representative of the tumor environment. Such models will serve to better understand the tumor biology and investigate new therapies for HCC. Special focus is given to innovative approaches, e.g., combined delivery therapies, and to alternative approaches-e.g., cell capture-as promising future trends in the application of biomaterials to treat HCC.

Ultrasound-guided intratumoral delivery of doxorubicin from in situ forming implants in a hepatocellular carcinoma model

BACKGROUND

Hepatocellular carcinomas are frequently nonresponsive to systemically delivered drugs. Local delivery provides an alternative to systemic administration, maximizing the dose delivered to the tumor, achieving sustained elevated concentrations of the drug, while minimizing systemic exposure.

RESULTS

Ultrasound-guided deposition of doxorubicin (Dox)-eluting in situ forming implants (ISFI) in an orthotopic tumor model significantly lowers systemic drug levels. As much as 60 µg Dox/g tumors were observed 21 days after ISFI injection. Tumors treated with Dox implants also showed a considerable reduction in progression at 21 days.

CONCLUSION

Dox-eluting ISFIs provide a promising platform for the treatment of hepatocellular carcinomas by which drug can be delivered directly into the lesion, bypassing distribution and elimination by the circulatory system.

Radio-frequency ablation-based studies on VX2rabbit models for HCC treatment

Hepatocellular carcinoma (HCC) is the fifth most frequent cancer worldwide with high morbidity, mortality and increasing incidence. It is of note that the main curative therapies for HCC are hepatic resection and transplantation although the majority of patients at the time of presentation are not eligible for resection or orthotopic liver transplantation (OLT) due to the underlying cirrhosis. Currently, a variety of loco-regional therapies, including radiofrequency ablation (RFA), percutaneous ethanol injection (PEI), microwave coagulation therapy (MCT), transarterial chemoembolization (TACE) and others, have been developed as alternative treatment options for HCC. Among these techniques, RFA is currently the most widely used treatment, due to its several advantages, such as safety and efficacy. To date, the effectiveness of RFA for HCC is reduced by the presence of residual tumor as a consequence of insufficient treatment. In order to ameliorate the effects of RFA on HCC, several in vivo studies, have been performed on its application as single or in combination treatment with drugs or others loco-regional therapies, by using rabbit VX2 liver model. This represents an ideal model of liver cancers and is widely used for imaging and other experimental studies due to the rapid growth of these tumors and their similarity to human hepatocellular carcinoma. In order to elucidate the therapeutic potential of RFA with adjuvant treatments for HCC, we reviewed the latest findings on the RFA-based studies in rabbit VX2 hepatocarcinoma models.

Metabolomic Analysis of Liver Tissue from the VX2 Rabbit Model of Secondary Liver Tumors

Purpose. The incidence of liver neoplasms is rising in USA. The purpose of this study was to determine metabolic profiles of liver tissue during early cancer development. Methods. We used the rabbit VX2 model of liver tumors (LT) and a control group consisting of sham animals implanted with Gelfoam into their livers (LG). After two weeks from implantation, liver tissue from lobes with and without tumor was obtained from experimental animals (LT+/LT−) as well as liver tissue from controls (LG+/LG−). Peaks obtained by Gas Chromatography-Mass Spectrometry were subjected to identification. 56 metabolites were identified and their profiles compared between groups using principal component analysis (PCA) and a mixed-effect two-way ANOVA model. Results. Animals recovered from surgery uneventfully. Analyses identified a metabolite profile that significantly differs in experimental conditions after controlling the False Discovery Rate (FDR). 16 metabolites concentrations differed significantly when comparing samples from (LT+/LT−) to samples from (LG+/LG−) livers. A significant difference was also shown in 20 metabolites when comparing samples from (LT+) liver lobes to samples from (LT−) liver lobes. Conclusion. Normal liver tissue harboring malignancy had a distinct metabolic signature. The role of metabolic profiles on liver biopsies for the detection of early liver cancer remains to be determined.

Colorectal cancer metastasis: the DNA repair inhibitor Dbait increases sensitivity to hyperthermia and improves efficacy of radiofrequency ablation

PURPOSE

To assess the usefulness of combining hyperthermia with a DNA repair inhibitor (double-strand break bait [Dbait]) and its potential application to radiofrequency ablation (RFA) in a preclinical model of human colorectal cancer.

MATERIALS AND METHODS

The local ethics committee of animal experimentation approved all investigations. First, the relevance was assessed by studying the survival of four human colorectal adenocarcinoma cell cultures after 1 hour of hyperthermia at 41°C or 43°C with or without Dbait. Human colon adenocarcinoma cells (HT-29) were grafted subcutaneously into nude mice (n = 111). When tumors reached approximately 500 mm(3), mice were treated with Dbait alone (n = 20), sublethal RFA (n = 21), three different Dbait schemes and sublethal RFA (n = 52), or a sham treatment (n = 18). RFA was performed to ablate the tumor center alone. To elucidate antitumor mechanisms, 39 mice were sacrificed for blinded pathologic analysis, including assessment of DNA damage, cell proliferation, and tumor necrosis. Others were monitored for tumor growth and survival. Analyses of variance and log-rank tests were used to evaluate differences.

RESULTS

When associated with mild hyperthermia, Dbait induced cytotoxicity in all tested colon cancer cell lines. Sublethal RFA or Dbait treatment alone moderately improved survival (median, 40 days vs 28 days for control; P = .0005) but combination treatment significantly improved survival (median, 84 days vs 40 days for RFA alone, P = .0004), with approximately half of the animals showing complete tumor responses. Pathologic studies showed that the Dbait and RFA combination strongly enhances DNA damage and coagulation areas in tumors.

CONCLUSION

Combining Dbait with RFA sensitizes the tumor periphery to mild hyperthermia and increases RFA antitumor efficacy.

Advances in image-guided intratumoral drug delivery techniques

Image-guided drug delivery provides a means for treating a variety of diseases with minimal systemic involvement while concurrently monitoring treatment efficacy. These therapies are particularly useful to the field of interventional oncology, where elevation of tumor drug levels, reduction of systemic side effects and post-therapy assessment are essential. This review highlights three such image-guided procedures: transarterial chemoembolization, drug-eluting implants and convection-enhanced delivery. Advancements in medical imaging technology have resulted in a growing number of new applications, including image-guided drug delivery. This minimally invasive approach provides a comprehensive answer to many challenges with local drug delivery. Future evolution of imaging devices, image-acquisition techniques and multifunctional delivery agents will lead to a paradigm shift in patient care.

Effects of Near-infrared Laser Irradiation of Biodegradable Microspheres Containing Hollow Gold Nanospheres and Paclitaxel Administered Intraarterially in a Rabbit Liver Tumor Model

PURPOSE

To evaluate the effects of near-infrared (NIR) laser irradiation of microspheres (MS) containing hollow gold nanospheres (HAuNS) and paclitaxel (PTX) administered intraarterially in an animal model.

MATERIALS AND METHODS

For the ex vivo experiments, VX2 tumor-bearing rabbits underwent administration of MS-HAuNS or MS via the hepatic artery (HA). The animals were killed, the liver tumors were subjected to NIR irradiation, and temperature changes were estimated with magnetic resonance (MR) imaging. For the in vivo study, VX2 tumor-bearing rabbits were randomly assigned to three groups: MS-HAuNS-PTX-plus-NIR, MS-HAuNS-PTX, and saline-plus-NIR. Laser irradiation was delivered at 1 hour and at 3 days after administration of saline or MS-HAuNS-PTX via the HA. Animals were euthanized, and tumors were analyzed for necrosis and apoptosis. Plasma samples were collected from the MS-HAuNS-PTX-plus-NIR animals for PTX analysis.

RESULTS

Ex vivo experiments showed intratumoral heating in animals that received MS-HAuNS but no temperature change in animals that received MS. Animals treated with MS-HAuNS-PTX-plus-NIR showed a transient increase in plasma PTX levels after each NIR irradiation and significantly greater tumor necrosis than animals that received MS-HAuNS-PTX or saline-plus-NIR (44.9% vs 13.8% or 23.7%; P < .0001). The mean apoptotic index in the MS-HAuNS-PTX-plus-NIR group (5.01 ± 1.66) was significantly higher than the mean apoptotic index in the MS-HAuNS-PTX (2.99 ± 0.97) or saline-plus-NIR (1.96 ± 0.40) groups (P = .0013).

CONCLUSIONS

NIR laser irradiation after MS-HAuNS-PTX administration results in intratumoral heating and increases the efficacy of treatment. Further studies are required to evaluate the optimal laser settings to maximize therapeutic efficacy.

Effects of tirapazamine on experimental colorectal liver metastases after radiofrequency ablation1

Background

Radiofrequency ablation (RFA) is a common procedure for the management of colorectal liver metastases. RFA-generated lesions are surrounded by a rim of hypoxia that is associated with aggressive outgrowth of intrahepatic micrometastases. Hypoxia-activated prodrugs such as tirapazamine are designed selectively to induce apoptosis in tumour cells under hypoxic conditions. Therefore, it was hypothesized that tirapazamine may have therapeutic value in limiting hypoxia-associated tumour outgrowth following RFA.

Methods

Murine C26 and MC38 colorectal cancer cells were grown under hypoxia and normal oxygenation in vitro, and treated with different concentrations of tirapazamine. Apoptosis and cell cycle distribution were assessed by western blot and fluorescence-activated cell sorting analysis. Proliferative capacity was tested by means of colony-formation assays. Mice harbouring microscopic colorectal liver metastases were treated with RFA, followed by a single injection of tirapazamine (60 mg/kg) or saline. Tumour load was assessed morphometrically 7 days later.

Results

Tirapazamine induced apoptosis of colorectal tumour cells under hypoxia in vitro. Under normal oxygenation, tirapazamine caused a G2 cell cycle arrest from which cells recovered partly. This reduced, but did not abolish, colony-forming capacity. A single dose of tirapazamine largely prevented accelerated outgrowth of hypoxic micrometastases following RFA. Tirapazamine administration was associated with minimal toxicity.

Conclusion

Tirapazamine induced apoptosis in colorectal cancer cells in a hypoxia-dependent manner and potently suppressed hypoxia-associated outgrowth of liver metastases with limited toxicity. This warrants further study to assess the potential value of tirapazamine, or other hypoxia-activated prodrugs, as adjuvant therapeutics following RFA treatment of colorectal liver metastases.

Local drug delivery strategies for cancer treatment: gels, nanoparticles, polymeric films, rods, and wafers

Polymer-based drug delivery depots have been investigated over the last several decades as a means to improve upon the lack of tumor targeting and severe systemic morbidities associated with intravenous chemotherapy treatments. These localized therapies exist in a variety of form factors designed to facilitate the delivery of drug directly to the site of disease in a controlled manner, sparing off-target tissue toxicities. Many of these depots are biodegradable and designed to maintain therapeutic concentrations of drug at the tumor site for a prolonged period of time. Thus a single implantation procedure is required, sometimes coincident with tumor excision surgery, and thereby biodegrading following complete release of the loaded active agent. Even though localized polymer depot delivery systems have been investigated, a surprisingly small subset of these technologies has demonstrated potentially curative preclinical results for cancer applications, and fewer have progressed toward commercialization. The aims of this article are to review the most well-studied and efficacious local polymer delivery systems from the last two decades, to examine the rationale for utilizing drug-eluting polymer implants in cancer patients, and to identify the patient cohorts that could most benefit from localized therapy. Finally, a discussion of the physiological barriers to localized therapy (i.e. drug penetration, transport), technical hurdles, and future outlook of the field is presented.

The dynamics of glutathione species and ophthalmate concentrations in plasma from the VX2 rabbit model of secondary liver tumors

Purpose. Available tumor markers have low sensitivity/specificity for the diagnosis of liver tumors. The present study was designed to evaluate the oxidoreductive status of the liver as surrogates of tumor subsistence and growth. Methods. Glutathione species (GSH:GSSG), ophthalmate (OA) concentrations, and their turnover were measured in plasma of rabbits (n = 6) in their healthy state and in the state of tumor growth after implantation of the VX2 carcinoma in their liver. Tumors were allowed to grow for a period of 14 days when rabbits were sacrificed. Livers were removed and cysteine concentration was measured in liver tissue. Results. Tumor growth was found in 100% of the rabbits. Concentration and labeling of GSH/GSSG were similar in experimental animals before and after tumor implantation and to sham animals. In contrast, OA concentration increased significantly in experimental animals after tumor implantation when compared to same animals prior to tumor implantation and to sham animals (P < .05). The concentration of cysteine, a precursor of GSH, was found to be significantly lower in the liver tissue adjacent to the tumor (P < .05). Conclusion. Disturbances in the oxidoreductive state of livers appear to be a surrogate of early tumor growth.

Characterization of formulation parameters affecting low molecular weight drug release from in situ forming drug delivery systems

In situ forming implants (ISFI) have shown promise in delivering adjuvant chemotherapy following minimally invasive cancer therapies such as thermal ablation of tumors. Although ISFI systems have been thoroughly investigated for delivery of high molecular weight (Mw) therapeutics, little research has been conducted to optimize their design for delivery of low Mw drugs. This study examined the effect of varying the formulation components on the low Mw drug release profile from a ISFI consisting of poly(D,L-lactide-co-glycolide) (PLGA), fluorescein (model drug), and excipient dissolved in 1-methyl-2-pyrrolidinone (NMP). Effects of varying PLGA Mw, excipient concentration, and drug loading were studied. Additionally, solubility studies were conducted to determine the critical water concentration required for phase inversion. Results demonstrated that PLGA Mw was the most significant factor in modulating low Mw drug release from the ISFI systems. ISFI formulations comprised of a low Mw (16 kDa) PLGA showed a significantly (p < 0.05) lower burst release (after 24 h), 28.2 +/- 0.5%, compared with higher Mw PLGA (60 kDa), 55.1 +/- 3.1%. Critical water concentration studies also demonstrated that formulations with lower Mw PLGA had increased solubility in water and may thus require more time to phase invert and release the drug.

Formulation and in vitro-in vivo evaluation of black raspberry extract-loaded PLGA/PLA injectable millicylindrical implants for sustained delivery of chemopreventive anthocyanins

PURPOSE

The objective of this study was to formulate and evaluate freeze-dried black raspberry (FBR) ethanol extract (RE) loaded poly(DL-lactic-co-glycolic acid) (PLGA) and poly(DL-lactic acid) (PLA) injectable millicylindrical implants for sustained delivery of chemopreventive FBR anthocyanins (cyanidin-3-sambubioside (CS), cyanidin-3-glucoside (CG) and cyanidin-3-rutinoside (CR)).

METHODS

Identification and quantitation of CS, CG, and CR in RE was performed by mass spectroscopy and HPLC. RE:triacetyl-beta-cyclodextrin (TA-beta-CD) inclusion complex (IC) was prepared by a kneading method and characterized by X-ray diffraction (XRD), nuclear magnetic resonance spectroscopy (NMR) and UV-visible spectroscopy. RE or RE:TA-beta-CD IC-loaded PLGA or PLA implants were prepared by a solvent extrusion method. In vitro and in vivo controlled release studies were conducted in phosphate-buffered saline Tween-80 (pH 7.4, 37 degrees C) and after subcutaneous administration in male Sprague-Dawley rats, respectively. Anthocyanins were quantified by HPLC at 520 nm.

RESULTS

The content of CS, CG, and CR in RE was 0.2, 1.5, and 3.5 wt%, respectively. The chemical stability of anthocyanins in solution was determined to be pH-dependent, and their degradation rate increased with an increase in pH from 2.4 to 7.4. PLGA/PLA millicylindrical implants loaded with 5 or 10 wt% RE exhibited a high initial burst and short release duration of anthocyanins (35-52 and 80-100% CG + CR release after 1 and 14 days, respectively). The cause for rapid anthocyanins release was linked to higher polymer water uptake and porosity associated with the high osmolytic components of large non-anthocyanin fraction of RE. XRD, (1)H NMR and UV-visible spectroscopy indicated that the non-anthocyanin fraction molecules of RE formed an IC with TA-beta-CD, decreasing the hydrophilicity of RE. Formation of an IC with hydrophobic carrier, TA-beta-CD, provided better in vitro/in vivo sustained release of FBR anthocyanins (16-24 and 97-99% CG + CR release, respectively, after 1 and 28 days from 20 wt% RE:TA-beta-CD IC/PLA implants) over 1 month, owing to reduced polymer water uptake and porosity.

CONCLUSION

PLA injectable millicylindrical implants loaded with RE:TA-beta-CD IC are optimal dosage forms for 1-month slow and continuous delivery of chemopreventive FBR anthocyanins.

Dynamic evolutionary changes in blood flow measured by MDCT in a hepatic VX2 tumor implant over an extended 28-day growth period: time-density curve analysis

RATIONALE AND OBJECTIVES

The enhancement pattern of malignant tumors has been studied in short-term animal models (7-14 days), but the reported results have been variable and inconsistent. The purpose of this study was to investigate the changing blood flow characteristics of VX2 tumors implanted in rabbit livers with contrast-enhanced multidetector computed tomography (MDCT) to establish a predictable pattern of vascular evolution over an extended 28-day growth period.

MATERIALS AND METHODS

VX2 carcinoma was implanted in livers of 10 male New Zealand White rabbits. Dynamic CT (2/seconds x 60 seconds) was conducted on days 7, 14, 21, and 28 after tumor implantation. Enhancement parameters of time-density curve (TDC), time to start (T0), time to peak (TP), maximum enhancement (DeltaH), slope of enhancement (SLe), and washout (SLw) in tumor center, tumor rim, and normal liver were analyzed. Tumor samples corresponding to CT images of one tumor on days 14 and 21 and seven tumors on day 28 were stained with hematoxylin and eosin and anti-CD31 monoclonal antibody. The relationship between enhancement parameters and histology parameters (thickness of tumor border, extent of blood stasis, and luminar vessel density) was analyzed.

RESULTS

Consistent growth, appearance, and vascular changes occurred in 7 of 10 animals over the 4-week observation period. Peripheral rim-like enhancement was noted in CT images. TDC analysis showed that tumor rim enhancement was pronounced and more rapid than normal liver initially but this difference diminished with tumor progression. The SLe, SLw, and DeltaH decreased from 10.03 +/- 3.25 Hu/second, 0.42 +/- 0.25 Hu/sec, and 58.00 +/- 25.27 Hu on day 7 to 5.86 +/- 2.73 Hu/second, 0.10 +/- 0.13 Hu/second, and 37.78 +/- 8.89 Hu/second on day 28, respectively. TP increased from 12.71 +/- 4.85 seconds on day 7 to 25.57 +/- 7.75 seconds on day 28. No significant changes were noted on the TDC parameters in normal liver. The maximum density difference between tumor rim and normal liver (D(rim-liver)) appeared 10.5 +/- 2.1 seconds after contrast injection. The maximum D(rim-liver) decreased from 54.33 +/- 37.86 Hu on day 7 to 11.16 +/- 13.03 Hu on day 28. On histological analysis, viable tumor cells were found in tumor rim with few luminar vessels. The tumor border showed desmoplastic reaction, vascular dilation and proliferation, inflammatory cell infiltration, and blood stasis. These findings were more obvious on day 28 than those on day 14. TP showed significant positive correlations with the extent of blood stasis in tumor border and adjacent liver and the maximum thickness of the tumor border (r = 0.945 and 0.893 respectively, P < .05).

CONCLUSION

The rabbit VX2 liver tumor is a hypovascular tumor with perilesional enhancement over its lifespan as imaged by MDCT. Consistent changes in the measured vascular parameters correlated with the size/age of the tumor implants. These findings suggest that the accuracy of CT enhancement imaging for VX2 liver tumor detection might be decreased with tumor development.

Intratumoral delivery of beta-lapachone via polymer implants for prostate cancer therapy

PURPOSE

beta-Lapachone (ARQ 501, a formulation of beta-lapachone complexed with hydroxypropyl-beta-cyclodextrin) is a novel anticancer agent with selectivity against prostate cancer cells overexpressing the NAD(P)H:quinone oxidoreductase-1 enzyme. Lack of solubility and an efficient drug delivery strategy limits this compound in clinical applications. In this study, we aimed to develop beta-lapachone-containing polymer implants (millirods) for direct implantation into prostate tumors to test the hypothesis that the combination of a tumor-specific anticancer agent with site-specific release of the agent will lead to significant antitumor efficacy.

EXPERIMENTAL DESIGN

Survival assays in vitro were used to test the killing effect of beta-lapachone in different prostate cancer cells. beta-Lapachone release kinetics from millirods was determined in vitro and in vivo. PC-3 prostate tumor xenografts in athymic nude mice were used for antitumor efficacy studies in vivo.

RESULTS

beta-Lapachone killed three different prostate cancer cell lines in an NAD(P)H:quinone oxidoreductase-1-dependent manner. Upon incorporation of solid-state inclusion complexes of beta-lapachone with hydroxypropyl-beta-cyclodextrin into poly(D,L-lactide-co-glycolide) millirods, beta-lapachone release kinetics in vivo showed a burst release of approximately 0.5 mg within 12 hours and a subsequently sustained release of the drug ( approximately 0.4 mg/kg/d) comparable with that observed in vitro. Antitumor efficacy studies showed significant tumor growth inhibition by beta-lapachone millirods compared with controls (P < 0.0001; n = 10 per group). Kaplan-Meier survival curves showed that tumor-bearing mice treated with beta-lapachone millirods survived nearly 2-fold longer than controls, without observable systemic toxicity.

CONCLUSIONS

Intratumoral delivery of beta-lapachone using polymer millirods showed the promising therapeutic potential for human prostate tumors.

Drug-eluting polymer implants in cancer therapy

BACKGROUND

Drug-eluting polymer implants present a compelling parenteral route of administration for cancer chemotherapy. With potential for minimally invasive, image-guided placement and highly localized drug release, these delivery systems are playing an increasingly important role in cancer management. This is particularly true as the use of labile proteins and other bioactive molecules is likely to increase in the upcoming years.

OBJECTIVE

In this review, we present the current trends in the application of Pre-formed and in situ-forming systems as drug-eluting implants for cancer chemotherapy.

METHODS

We outline the clinically available options as well as up-and-coming technologies and their advantages and challenges. We also describe ongoing related innovations with image-guided drug delivery, mathematical modeling of implanted delivery systems and implanted drug delivery in combination with other therapies.

RESULTS/CONCLUSION

Whether used alone or combined with other minimally invasive procedures, drug-eluting polymeric implants will play a significant role in the future of cancer management.

Model simulation and experimental validation of intratumoral chemotherapy using multiple polymer implants

Radiofrequency ablation has emerged as a minimally invasive option for liver cancer treatment, but local tumor recurrence is common. To eliminate residual tumor cells in the ablated tumor, biodegradable polymer millirods have been designed for local drug (e.g., doxorubicin) delivery. A limitation of this method has been the extent of drug penetration into the tumor (<5 mm), especially in the peripheral tumor rim where thermal ablation is less effective. To provide drug concentration above the therapeutic level as needed throughout a large tumor, implant strategies with multiple millirods were devised using a computational model. This dynamic, 3-D mass balance model of drug distribution in tissue was used to simulate the consequences of various numbers of implants in different locations. Experimental testing of model predictions was performed in a rabbit VX2 carcinoma model. This study demonstrates the value of multiple implants to provide therapeutic drug levels in large ablated tumors.

Effect of formulation parameters on 2-methoxyestradiol release from injectable cylindrical poly(DL-lactide-co-glycolide) implants

The objective of this study was to investigate the potential of various formulation strategies to achieve 1-month continuous (improved) release of the novel anti-cancer drug, 2-methoxyestradiol (2-ME), from injectable cylindrical poly(DL-lactide-co-glycolide) (PLGA) implants. PLGA implants were prepared by a solvent extrusion method. PLGA 50:50 (M(w)=51 kDa, end group=lauryl ester) (PLGA-lauryl ester) implants loaded with 3-30 wt% 2-ME exhibited a pronounced lag phase (i.e., corresponding to induction time to polymer mass loss) and triphasic release profile. Incorporation of 5 wt% hydroxypropyl-beta-cyclodextrin (HP-beta-CD) (approximately 57% release after 28 days) or Pluronic F127 (approximately 42% release after 28 days) in PLGA-lauryl ester implants reduced the lag-phase and improved the drug release moderately over a period of 28 days. The formation and the incorporation of a 2-ME/polyethylene glycol (PEG) 8000 solid dispersion in PLGA-lauryl ester implants further increased drug release (approximately 21% and 73% release after 1 and 28 days, respectively), attributable to improved drug solubility/dissolution, higher matrix porosity, and accelerated polymer degradation. Blending of PLGA 50:50 (M(w)=24 kDa, end group=COOH) (PLGA-COOH) with the PLGA-lauryl ester also provided moderate enhancement of 2-ME release over a period of 28 days. PLGA-COOH (M(w)=24 kDa) implants with 3-5% w/w pore-forming MgCO(3) exhibited the most desirable drug release among all the formulations tested, and, demonstrated 1-month slow and continuous in vitro release of approximately 80% 2-ME after a minimal initial burst. Hence, these formulation approaches provide several possible avenues to improve release rates of the hydrophobic drug, 2-ME, from PLGA for future application in regional anti-cancer therapy.

Modeling doxorubicin transport to improve intratumoral drug delivery to RF ablated tumors

A mathematical model of drug transport provides an ideal strategy to optimize intratumoral drug delivery implants to supplement radiofrequency (RF) ablation for tumor treatment. To simulate doxorubicin transport in non-ablated and ablated liver tumors, a one-dimensional, cylindrically symmetric transport model was generated using a finite element method (FEM). Parameters of this model, the diffusion (D) and elimination (gamma) coefficients for doxorubicin, were estimated using drug distributions measured 4 and 8 days after placing biodegradable implants in non-ablated and ablated rabbit VX2 liver carcinomas. In non-ablated tumor, values of diffusion and elimination parameters were 25% and 94% lower than normal liver tissue, respectively. In ablated tumor, diffusion near the ablation center was 75% higher than non-ablated tumor but decreased to the non-ablated tumor value at the ablation periphery. Drug elimination in ablated tumor was zero for the first four days, but by day 8 returned to 98% of the value for non-ablated tumor. Three-dimensional (3-D) simulations of drug delivery from implants with and without RF thermal ablation underscore the benefit of using RF ablation to facilitate local drug distribution. This study demonstrates the use of computational modeling and optimal parameter estimation to predict local drug pharmacokinetics from intratumoral implants after ablation.