Acrylic bone cements with bismuth salicylate: Behavior in simulated physiological conditions

Direct and interactive effects of three variables on properties of PMMA bone cement for vertebral body augmentation

PMMA bone cements are widely used for vertebral body augmentation procedures vertebroplasty and balloon kyphoplasty. Although there are studies in the literature on the direct effects of relevant variables on the properties of these cements, there are none on the interactive effects. In the present work, such a study was performed on both types of effects, with the variables being the concentration of initiator (benzoyl peroxide), the concentration of crosslinker (ethylene glycol dimethacrylate), and the liquid-to-powder ratio used in preparing the cement; and the properties being the compressive strength, the compressive modulus, the doughing time, the setting time, and the maximum polymerization temperature. Two additional properties obtained from the viscosity-versus-time curves, namely the time at the onset of curing, and the critical curing rate were also studied. Significant interactive effects between the amount of crosslinker and the amount of radical initiator were found to affect the doughing time and the critical curing rate. These effects were explained in terms of the reaction kinetics. It was concluded that interactive effects may exist and should be taken into account when designing bone cement formulations.

Combined influence of barium sulfate content and co-monomer concentration on properties of PMMA bone cements for vertebroplasty

In this work, the combined influence of barium sulfate content and co-monomer concentration on the properties of acrylic bone cement for percutaneous vertebroplasty (PVP) was investigated using a response surface methodology. Cements were prepared with methyl methacrylate (MMA) and either diethyl amino ethyl methacrylate (DEAEM) or dimethyl amino ethyl methacrylate (DMAEM) as co-monomer in the liquid phase, while variable amounts of barium sulfate were incorporated to the solid phase in order to improve the radiopacity of cements. It was found that various properties such as peak temperature, setting time, residual monomer content, mechanical properties and injectability, had an effect on the occurrence of interactions (combined effect) between the barium sulfate and DEAEM in bone cements formulations when independent variables were at their maximum.

Bone cements and their potential use in a mandibular endoprosthesis

Bone cement was first used in the 1950s. Since then many modifications have been made and alternatives developed to the original polymethylmethacrylate (PMMA) cement. In view of the use of bone cement in a novel mandibular endoprosthetic system, we performed a review of the current literature on this material. Different cements are described and their potential use in a mandibular endoprosthetic system discussed. The PMMA-based cements are currently the most suitable choice. Plain PMMA has the longest track record and is the default choice for the initial development phase of this system. If there is a significant risk of infection, then an antibiotic-loaded PMMA cement can be selected. However, modified PMMA cements, composite resin cements, osteoinductive calcium phosphate compounds, and cementless fixation are options that offer advantages over PMMA cements, and further research should be conducted to study their suitability.

New injectable and radiopaque antibiotic loaded acrylic bone cements

The use of antibiotic loaded bone cements (ALBCs) has become a common clinical practice in the prevention and treatment of prosthesis-related infections. However, due to antibiotic resistance, there is a general interest in broadening the antibacterial spectrum of currently used drugs. The aim of this work is to formulate ALBCs for specific use in vertebroplasty and kyphoplasty, and to study the effect of the addition of ciprofloxacin alone and in combination with vancomycin on some properties of the cement. The cements were formulated using bismuth salicylate as the radiopacifier. The setting properties, residual monomer content, release of antibiotics, rheological behavior, injectability, and mechanical properties of these formulations were studied. They showed long setting times and low curing temperatures. From the release studies, antibacterial properties are assumed because the concentration of released antibiotic was higher than the minimum effective. Although the experimental cements had slightly reduced mechanical properties, the other alterations shown were negligible.

Alternative acrylic bone cement formulations for cemented arthroplasties: present status, key issues, and future prospects

All the commercially available plain acrylic bone cement brands that are used in cemented arthroplasties are based on poly (methyl methacrylate) and, with a few exceptions, have the same constituents. It is well known that these brands are beset with many drawbacks, such as high maximum exotherm temperature, lack of bioactivity, and volumetric shrinkage upon curing. Furthermore, concerns have been raised about a number of the constituents, such as toxicity of the activator (N,N,dimethyl-p-toluidine) and possible involvement of the radiopacifier (BaSO(4) or ZrO(2) particles) in third-body wear. Thus, over the years, many research efforts have been expended to address these drawbacks, culminating in a large number of alternative formulations, which may be grouped into 16 categories. Although there are a number of reviews of the large literature that now exists on these formulations, each covers only some of the categories and none contains a detailed discussion of the germane issues. The objective of the present work, therefore, was to present a comprehensive and critical review of the whole field. In addition to succinct descriptions of the cements in each category, there are explicative summaries of literature reports, a detailed discussion of several key issues surrounding the potential for use of these cements in cemented arthroplasties, and a presentation of numerous ideas for future studies.