Preparation, characterization, and properties of nano-TiO2/silk fibroin hybrid films by sol–gel processing

Bioactive Silk Fibroin-Based Hybrid Biomaterials for Musculoskeletal Engineering: Recent Progress and Perspectives

Musculoskeletal engineering has been considered as a promising approach to customize regenerated tissue (such as bone, cartilage, tendon, and ligament) via a self-healing performance. Recent advances have demonstrated the great potential of bioactive materials for regenerative medicine. Silk fibroin (SF), a natural polymer, is regarded as a remarkable bioactive material for musculoskeletal engineering thanks to its biocompatibility, biodegradability, and tunability. To improve tissue-engineering performance, silk fibroin is hybridized with other biomaterials to form silk-fibroin-based hybrid biomaterials, which achieve superior mechanical and biological performance. Herein, we summarize the recent development of silk-based hybrid biomaterials in musculoskeletal tissue with reasonable generalization and classification, mainly including silk fibroin-based inorganic and organic hybrid biomaterials. The applied inorganics are composed of calcium phosphate, graphene oxide, titanium dioxide, silica, and bioactive glass, while the polymers include polycaprolactone, collagen (or gelatin), chitosan, cellulose, and alginate. This article mainly focuses on the physical and biological performances both in vitro and in vivo study of several common silk-based hybrid biomaterials in musculoskeletal engineering. The timely summary and highlight of silk-fibroin-based hybrid biomaterials will provide a research perspective to promote the further improvement and development of silk fibroin hybrid biomaterials for improved musculoskeletal engineering.

Facile and Effective Fabrication of Highly UV-Resistant Silk Fabrics with Excellent Laundering Durability and Thermal and Chemical Stabilities

As the most favored high-quality biopolymer, silk fiber is widely used in the textile and medical industries owing to its impressive mechanical properties, wear comfort properties, and biocompatibility. However, its photoinstability, chemical instability, and thermal instability seriously hinder its utilization in luxurious fashionable apparels. Therefore, we herein report the preparation of an ultrathin and uniform TiO₂-Al₂O₃ cloth with a thickness of just six in a thousand of fiber on silkworm silk fiber via atomic layer deposition. In this ultrathin composite cloth, the outer TiO₂ layer acts as a sacrificial ultraviolet (UV) absorbent to dissipate large amounts of UV energy. Free radicals and electrons generated by the TiO₂ layer are effectively blocked outside the surface of the bulk silk fiber by the inner insulating Al₂O₃ layer. The excellent UV-resistance of the modified silk fiber was confirmed by a lack of fade in the silk fabric after exposure to UV light for 60 min (equal to continuous exposure to strong sunlight for 3285 days). Compared with silk fiber, the tenacity of the prepared SF-200Al₂O₃-800TiO₂ increased by 18.9% even after sunlight exposure. In addition, both the chemical and thermal stabilities of the modified silk fiber were improved. This technology is expected to have potential applications in various fields, such as high-end fabric development and smart materials, and will further guide material design for future innovations in functional fibers and devices.

Effect of UV-light on the uniaxial tensile properties and structure of uncoated and TiO2 coated Bombyx mori silk fibers

The effect of UV-light on the uniaxial tensile properties and the structure of uncoated and TiO2 coated silk fibers in the bave form by using sol-gel method was investigated with tensile testing and FT-IR/ATR spectroscopy methods after the silk filaments were exposed to UV-light with high intensity of 760W/m(2) for different times from 0.5h to 1day. It was clearly observed that TiO2 coating considerably increased the Young's modulus of the uncoated silk single filament by around 17% before the UV-irradiation. The yield point and the post yield region disappeared on the stress-strain curves of both uncoated and TiO2 coated silk filaments after UV-irradiation time higher than 1h. Except for the Young's modulus, most of the tensile characteristics of both uncoated and TiO2 coated silk filaments decreased remarkably with increasing UV-irradiation time, e.g., after 1h irradiation, although the Young's modulus slightly changed and ultimate tensile strength decreased by only around 18% and 23%, for the uncoated and TiO2 coated silk filaments, respectively; breaking extension decreased dramatically by 67% and 72%, respectively, for uncoated and TiO2 coated silk filaments. Only the Young's modulus of TiO2 coated silk filaments which can be considered as a more stable tensile characteristic became significantly higher than that of the uncoated silk filaments with increasing UV-irradiation time. After 1day irradiation, even though the uncoated silk filaments could not be tested and completely lost of their fiber properties, the TiO2 coated silk filaments showed a stress-strain curve in initial elastic region with Young's modulus of ∼13GPa which indicates considerable protective effect of TiO2 on the silk fiber structure, especially on the β-sheet microcrystals against UV-radiation. The FT-IR/ATR spectral results showed that significant photodegradation took place in not only crystalline but also amorphous regions which were deduced from the decrease in the absorbance ratios of the bands assigned to CH3 rocking, Cα-Cβ, Cα-C stretching vibrations in β-sheet crystalline regions as well as the Amide I, II, and III bands for both crystalline and amorphous regions. Even though the ratio of crystalline to amorphous regions in uncoated silk filaments decreased significantly, the ratio in TiO2 coated silk filaments became almost constant with increasing UV-irradiation time which may indicate more stable β-sheet microcrystals against photodegradation.

Endothelial cell migration and morphogenesis on silk fibroin scaffolds containing hydroxyapatite electret

The purpose of this study was to evaluate the effects of composite wound dressing films made of silk fibroin (SF) containing hydroxyapatite (HA) or polarized HA (pHA) powders on endothelial cell (EC) behaviors that have important roles in the wound-healing process. XRD revealed the SF films to be semicrystalline, with a broad peak centered at about 20.7° which is characteristic of β-sheets embedded within an amorphous matrix. The SF composite films with 0.6 (w/v)% in concentration of HA powder (HA/SF) or pHA powder (pHA/SF) contained HA crystals of amorphous and silk II crystalline structures. SEM observation showed that there were differences in SF morphology between HA/SF and pHA/SF. The pHA/SF exhibited a furry texture around the pHA crystals, most likely due to the stored charged and zeta potentials. The HA/SF and pHA/SF films enhanced EC migration compared with that on the SF film. The number of migrated cells on the HA/SF and pHA/SF was ~1.5 times larger than that on the SF. The quantitative analysis of the endothelial morphogenesis indicated that the pHA/SF film enhanced the formation of capillary-like structures compared with SF and HA/SF. Thus, pHA/SF may potentially stimulate and contribute to the enhancement of angiogenesis in the wound-healing process.