Application of porous glycosaminoglycan-based scaffolds for expansion of human cord blood stem cells in perfusion culture

Engineered Tissue Models to Replicate Dynamic Interactions within the Hematopoietic Stem Cell Niche

Hematopoietic stem cells are the progenitors of the blood and immune system and represent the most widely used regenerative therapy. However, their rarity and limited donor base necessitate the design of ex vivo systems that support HSC expansion without the loss of long-term stem cell activity. This review describes recent advances in biomaterials systems to replicate features of the hematopoietic niche. Inspired by the native bone marrow, these instructive biomaterials provide stimuli and cues from cocultured niche-associated cells to support HSC encapsulation and expansion. Engineered systems increasingly enable study of the dynamic nature of the matrix and biomolecular environment as well as the role of cell-cell signaling (e.g., autocrine feedback vs paracrine signaling between dissimilar cells). The inherent coupling of material properties, biotransport of cell-secreted factors, and cell-mediated remodeling motivate dynamic biomaterial systems as well as characterization and modeling tools capable of evaluating a temporally evolving tissue microenvironment. Recent advances in HSC identification and tracking, model-based experimental design, and single-cell culture platforms facilitate the study of the effect of constellations of matrix, cell, and soluble factor signals on HSC fate. While inspired by the HSC niche, these tools are amenable to the broader stem cell engineering community.

Mesenchymal Stem Cell Immunomodulation: A Novel Intervention Mechanism in Cardiovascular Disease

Mesenchymal stem cells (MSCs) are the member of multipotency stem cells, which possess the capacity for self-renewal and multi-directional differentiation, and have several characteristics, including multi-lineage differentiation potential and immune regulation, which make them a promising source for cell therapy in inflammation, immune diseases, and organ transplantation. In recent years, MSCs have been described as a novel therapeutic strategy for the treatment of cardiovascular diseases because they are potent modulators of immune system with the ability to modulating immune cell subsets, coordinating local and systemic innate and adaptive immune responses, thereby enabling the formation of a stable inflammatory microenvironment in damaged cardiac tissues. In this review, the immunoregulatory characteristics and potential mechanisms of MSCs are sorted out, the effect of these MSCs on immune cells is emphasized, and finally the application of this mechanism in the treatment of cardiovascular diseases is described to provide help for clinical application.

Engineering strategies to achieve efficient in vitro expansion of haematopoietic stem cells: development and improvement

Haematopoietic stem cells are the basis for building and maintaining lifelong haematopoietic mechanisms and important resources for the treatment of blood disorders. Haematopoietic niches are microenvironment in the body where...

Rebuilding the hematopoietic stem cell niche: Recent developments and future prospects

Hematopoietic stem cells (HSCs) have proven their clinical relevance in stem cell transplantation to cure patients with hematological disorders. Key to their regenerative potential is their natural microenvironment - their niche - in the bone marrow (BM). Developments in the field of biomaterials enable the recreation of such environments with increasing preciseness in the laboratory. Such artificial niches help to gain a fundamental understanding of the biophysical and biochemical processes underlying the interaction of HSCs with the materials in their environment and the disturbance of this interplay during diseases affecting the BM. Artificial niches also have the potential to multiply HSCs in vitro, to enable the targeted differentiation of HSCs into mature blood cells or to serve as drug-testing platforms. In this review, we will introduce the importance of artificial niches followed by the biology and biophysics of the natural archetype. We will outline how 2D biomaterials can be used to dissect the complexity of the natural niche into individual parameters for fundamental research and how 3D systems evolved from them. We will present commonly used biomaterials for HSC research and their applications. Finally, we will highlight two areas in the field of HSC research, which just started to unlock the possibilities provided by novel biomaterials, in vitro blood production and studying the pathophysiology of the niche in vitro. With these contents, the review aims to give a broad overview of the different biomaterials applied for HSC research and to discuss their potentials, challenges and future directions in the field. STATEMENT OF SIGNIFICANCE: Hematopoietic stem cells (HSCs) are multipotent cells responsible for maintaining the turnover of all blood cells. They are routinely applied to treat patients with hematological diseases. This high clinical relevance explains the necessity of multiplication or differentiation of HSCs in the laboratory, which is hampered by the missing natural microenvironment - the so called niche. Biomaterials offer the possibility to mimic the niche and thus overcome this hurdle. The review introduces the HSC niche in the bone marrow and discusses the utility of biomaterials in creating artificial niches. It outlines how 2D systems evolved into sophisticated 3D platforms, which opened the gateway to applications such as, expansion of clinically relevant HSCs, in vitro blood production, studying niche pathologies and drug testing.

Combining Stem Cells and Biomaterial Scaffolds for Constructing Tissues and Cell Delivery

Combining stem cells with biomaterial scaffolds serves as a promising strategy for engineering tissues for both in vitro and in vivo applications. This updated review details commonly used biomaterial scaffolds for engineering tissues from stem cells. We first define the different types of stem cells and their relevant properties and commonly used scaffold formulations. Next, we discuss natural and synthetic scaffold materials typically used when engineering tissues, along with their associated advantages and drawbacks and gives examples of target applications. New approaches to engineering tissues, such as 3D bioprinting, are described as they provide exciting opportunities for future work along with current challenges that must be addressed. Thus, this review provides an overview of the available biomaterials for directing stem cell differentiation as a means of producing replacements for diseased or damaged tissues.

Nanowire Assemblies for Flexible Electronic Devices: Recent Advances and Perspectives

The fabrication of nanowire (NW)-based flexible electronics including wearable energy storage devices, flexible displays, electrical sensors, and health monitors has received great attention both in fundamental research and market requirements in our daily lives. Other than a disordered state after synthesis, NWs with designed and hierarchical structures would not only optimize the intrinsic performance, but also create new physical and chemical properties, and integration of individual NWs into well-defined structures over large areas is one of the most promising strategies to optimize the performance of NW-based flexible electronics. Here, the recent developments and achievements made in the field of flexible electronics composed of integrated NW structures are presented. The different assembly strategies for the construction of 1D, 2D, and 3D NW assemblies, especially the NW coassembly process for 2D NW assemblies, are comprehensively discussed. The improvements of different NW assemblies on flexible electronics structure and performance are described in detail to elucidate the advantages of well-defined NW assemblies. Finally, a short summary and outlook for future challenges and perspectives in this field are presented.

Nanofiber technology in the ex vivo expansion of cord blood-derived hematopoietic stem cells

Umbilical cord blood (CB) can be used as an alternative source of hematopoietic stem cells (HSCs) for transplantation in hematological and non-hematological disorders. Despite several recognized advantages the limited cell number in CB one unit still restricts its clinical use. The success of transplantation greatly depends on the levels of total nucleated cell and CD34+ cell counts. Thus, many ex vivo strategies have been developed within the last decade in order to solve this obstacle, with more or less success, mainly determined by the degree of difficulty related with maintaining HSCs self-renewal and stemness properties after long-term expansion. Different research groups have developed very promising and diverse CB-derived HSC expansion strategies using nanofiber scaffolds. Here we review the state-of-the-art of nanofiber technology-based CB-derived HSC expansion.

Synergistic Integration of Mesenchymal Stem Cells and Hydrostatic Pressure in the Expansion and Maintenance of Human Hematopoietic/Progenitor Cells

Ex vivo expansion of hematopoietic stem/progenitor cell (HSPC) has been investigated to improve the clinical outcome of HSPC transplantation. However, ex vivo expansion of HSPCs still faces a major obstacle in that HPSCs tend to differentiate when proliferating. Here, we cocultured HSPCs with mesenchymal stem cells (MSCs) and divided the HSPCs into two fractions according to whether they came into adherent to MSCs or not. Additionally, we used hydrostatic pressure (HP) to mimic the physical conditions in vivo. Even nonadherent cells expanded to yield a significantly larger number of total nucleated cells (TNCs), adherent cells maintained the HSPC phenotype (CD34⁺, CD34⁺CD38⁻, and CD133⁺CD38⁻) to a greater extent than nonadherent cells and had superior clonogenic potential. Moreover, applying HP significantly increased the number of TNCs, the frequency of the immature HSPC phenotype, and the clonogenic potential. Furthermore, the genetic markers for the HSPC niche were significantly increased under HP. Our data suggest that the nonadherent fraction is the predominant site of HSPC expansion, whereas the adherent fraction seems to mimic the HSPC niche for immature cells. Moreover, HP has a synergistic effect on expansion and functional maintenance. This first study utilizing HP has a potential of designing clinically applicable expansion systems.

Hematopoietic Niche - Exploring Biomimetic Cues to Improve the Functionality of Hematopoietic Stem/Progenitor Cells

The adult bone marrow (BM) niche is a complex entity where a homeostatic hematopoietic system is maintained through a dynamic crosstalk between different cellular and non-cellular players. Signaling mechanisms triggered by cell-cell, cell-extracellular matrix (ECM), cell-cytokine interactions, and local microenvironment parameters are involved in controlling quiescence, self-renewal, differentiation, and migration of hematopoietic stem/progenitor cells (HSPC). A promising strategy to more efficiently expand HSPC numbers and tune their properties ex vivo is to mimic the hematopoietic niche through integration of adjuvant stromal cells, soluble cues, and/or biomaterial-based approaches in HSPC culture systems. Particularly, mesenchymal stem/stromal cells (MSC), through their paracrine activity or direct contact with HSPC, are thought to be a relevant niche player, positioning HSPC-MSC co-culture as a valuable platform to support the ex vivo expansion of hematopoietic progenitors. To improve the clinical outcome of hematopoietic cell transplantation (HCT), namely when the available HSPC are present in a limited number such is the case of HSPC collected from umbilical cord blood (UCB), ex vivo expansion of HSPC is required without eliminating the long-term repopulating capacity of more primitive HSC. Here, we will focus on depicting the characteristics of co-culture systems, as well as other bioengineering approaches to improve the functionality of HSPC ex vivo.

Long-term liver-specific functions of hepatocytes in electrospun chitosan nanofiber scaffolds coated with fibronectin

In this study, a new 3D liver model was developed using biomimetic nanofiber scaffolds and co-culture system consisting of hepatocytes and fibroblasts for the maintenance of long-term liver functions. The chitosan nanofiber scaffolds were fabricated by the electrospinning technique. To enhance cellular adhesion and spreading, the surfaces of the chitosan scaffolds were coated with fibronectin (FN) by adsorption and evaluated for various cell types. Cellular phenotype, protein expression, and liver-specific functions were extensively characterized by immunofluorescent and histochemical stainings, albumin enzyme-linked immunosorbent assay and Cytochrome p450 detoxification assays, and scanning electron microscopy. The electrospun chitosan scaffolds exhibited a highly porous and randomly oriented nanofibrous structure. The FN coating on the surface of the chitosan nanofibers significantly enhanced cell attachment and spreading, as expected, as surface modification with this cell adhesion molecule on the chitosan surface is important for focal adhesion formation and integrin binding. Comparison of hepatocyte mono-cultures and co-cultures in 3D culture systems indicated that the hepatocytes in co-cultures formed colonies and maintained their morphologies and functions for prolonged periods of time. The 3D liver tissue model developed in this study will provide useful tools toward the development of engineered liver tissues for drug screening and tissue engineering applications. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2119-2128, 2017.

Bone-marrow mimicking biomaterial niches for studying hematopoietic stem and progenitor cells

This review discusses the considerations and approaches that have been employed for designing biomaterial based cultures for replicating the hematopoietic stem and progenitor cell niche.

A three-dimensional hierarchical scaffold fabricated by a combined rapid prototyping technique and electrospinning process to expand hematopoietic stem/progenitor cells

OBJECTIVE

To investigate the expansion of hematopoietic stem/progenitor cells (HSPCs) from umbilical cord blood using extracellular matrix (ECM) protein-coated three-dimensional hierarchical scaffolds.

RESULTS

The expansion of HSPCs was evaluated through total nucleated cell (TNC) expansion, immuno-phenotypic analysis, and clonogenic ability. After 7 days of culture, three-dimensional cultures with fibronectin-coated scaffolds achieved the highest fold increase in TNCs (164 ± 6.9 fold) and the highest CD45(+)CD34(+) (35 %) and CD34(+)CD38(-) (32 %) ratios.

CONCLUSION

Three-dimensional hierarchical scaffolds were coated with ECM protein to simulate a biomimetic environment or niche, and had a significant effect on the expansion potential of HSPCs without changing their phenotype.

Conductive Polymer Porous Film with Tunable Wettability and Adhesion

A conductive polymer porous film with tunable wettability and adhesion was fabricated by the chloroform solution of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyricacid-methyl-ester (PCBM) via the freeze drying method. The porous film could be obtained from the solution of 0.8 wt%, whose pore diameters ranged from 50 nm to 500 nm. The hydrophobic porous surface with a water contact angle (CA) of 144.7° could be transferred into a hydrophilic surface with CA of 25° by applying a voltage. The water adhesive force on the porous film increased with the increase of the external voltage. The electro-controllable wettability and adhesion of the porous film have potential application in manipulating liquid collection and transportation.

Applications of human hematopoietic stem cells isolated and expanded from different tissues in regenerative medicine

Bone marrow transplantation is a well-established stem cell-based therapy for the management of malignant and nonmalignant hematological disorders. In addition to the bone marrow, therapeutic hematopoietic stem cells (HSCs) can also be obtained from umbilical cord blood and mobilized peripheral blood. Transplantation of HSCs isolated from these tissues can be carried out with or without prior enrichment of specific cell types. New methodologies have been developed for lineage-specific HSC expansion and their transplantation as a supplementary treatment to whole bone marrow transplantation. In this review we have described the current methodologies for isolating and processing HSCs from various tissues, and discussed strategies to generate sufficient and functional HSCs for clinical and preclinical applications by expansion ex vivo. The various disease conditions in which these cells could be used, and the methods for delivering the cells into patients, are also discussed.

Heparin crosslinked chitosan microspheres for the delivery of neural stem cells and growth factors for central nervous system repair

An effective paradigm for transplanting large numbers of neural stem cells after central nervous system (CNS) injury has yet to be established. Biomaterial scaffolds have shown promise in cell transplantation and in regenerative medicine, but improved scaffolds are needed. In this study we designed and optimized multifunctional and biocompatible chitosan-based films and microspheres for the delivery of neural stem cells and growth factors for CNS injuries. The chitosan microspheres were fabricated by coaxial airflow techniques, with the sphere size controlled by varying the syringe needle gauge and the airflow rate. When applying a coaxial airflow at 30 standard cubic feet per hour, ∼300μm diameter spheres were reproducibly generated that were physically stable yet susceptible to enzymatic degradation. Heparin was covalently crosslinked to the chitosan scaffolds using genipin, which bound fibroblast growth factor-2 (FGF-2) with high affinity while retaining its biological activity. At 1μgml(-1) approximately 80% of the FGF-2 bound to the scaffold. A neural stem cell line, GFP+RG3.6 derived from embryonic rat cortex, was used to evaluate cytocompatibility, attachment and survival on the crosslinked chitosan-heparin complex surfaces. The MTT assay and microscopic analysis revealed that the scaffold containing tethered FGF-2 was superior in sustaining survival and growth of neural stem cells compared to standard culture conditions. Altogether, our results demonstrate that this multifunctional scaffold possesses good cytocompatibility and can be used as a growth factor delivery vehicle while supporting neural stem cell attachment and survival.

Replication of bone marrow differentiation niche: comparative evaluation of different three-dimensional matrices

The comparative evaluation of different 3D matrices-Matrigel, Puramatrix, and inverted colloidal crystal (ICC) scaffolds-provides a perspective for studying the pathology and potential cures for many blood and bone marrow diseases, and further proves the significance of 3D cultures with direct cell-cell contacts for in vitro mimicry of the human stem cell niche.

Stem cell bioengineering strategies to widen the therapeutic applications of haematopoietic stem/progenitor cells from umbilical cord blood

Umbilical cord blood (UCB) transplantation has observed a significant increase in recent years, due to the unique features of UCB haematopoietic stem/progenitor cells (HSCs) for the treatment of blood-related disorders. However, the low cell numbers available per UCB unit significantly impairs the widespread use of this source for transplantation of adult patients, resulting in graft failure, delayed engraftment and delayed immune reconstitution. In order to overcome this issue, distinct approaches are now being considered in clinical trials, such as double-UCB transplantation, intrabone injection or ex vivo expansion. In this article the authors review the current state of the art, future trends and challenges on the ex vivo expansion of UCB HSCs, focusing on culture parameters affecting the yield and quality of the expanded HSC grafts: novel HSC selection schemes prior to cell culture, cytokine/growth factor cocktails, the impact of biochemical factors (e.g. O2 ) or the addition of supportive cells, e.g. mesenchymal stem/stromal cell (MSC)-based feeder layers) were addressed. Importantly, a critical challenge in cellular therapy is still the scalability, reproducibility and control of the expansion process, in order to meet the clinical requirements for therapeutic applications. Efficient design of bioreactor systems and operation modes are now the focus of many bioengineers, integrating the increasing 'know-how' on HSC biology and physiology, while complying with the GMP standards for the production of cellular products, i.e. through the use of commercially available, highly controlled, disposable technologies.

Functional 3-D cardiac co-culture model using bioactive chitosan nanofiber scaffolds

The in vitro generation of a three-dimensional (3-D) myocardial tissue-like construct employing cells, biomaterials, and biomolecules is a promising strategy in cardiac tissue regeneration, drug testing, and tissue engineering applications. Despite significant progress in this field, current cardiac tissue models are not yet able to stably maintain functional characteristics of cardiomyocytes for long-term culture and therapeutic purposes. The objective of this study was to fabricate bioactive 3-D chitosan nanofiber scaffolds using an electrospinning technique and exploring its potential for long-term cardiac function in the 3-D co-culture model. Chitosan is a natural polysaccharide biomaterial that is biocompatible, biodegradable, non-toxic, and cost effective. Electrospun chitosan was utilized to provide structural scaffolding characterized by scale and architectural resemblance to the extracellular matrix (ECM) in vivo. The chitosan fibers were coated with fibronectin via adsorption in order to enhance cellular adhesion to the fibers and migration into the interfibrous milieu. Ventricular cardiomyocytes were harvested from neonatal rats and studied in various culture conditions (i.e., mono- and co-cultures) for their viability and function. Cellular morphology and functionality were examined using immunofluorescent staining for alpha-sarcomeric actin (SM-actin) and gap junction protein, Connexin-43 (Cx43). Scanning electron microscopy (SEM) and light microscopy were used to investigate cellular morphology, spatial organization, and contractions. Calcium indicator was used to monitor calcium ion flux of beating cardiomyocytes. The results demonstrate that the chitosan nanofibers retained their cylindrical morphology in long-term cell cultures and exhibited good cellular attachment and spreading in the presence of adhesion molecule, fibronectin. Cardiomyocyte mono-cultures resulted in loss of cardiomyocyte polarity and islands of non-coherent contractions. However, the cardiomyocyte-fibroblast co-cultures resulted in polarized cardiomyocyte morphology and retained their morphology and function for long-term culture. The Cx43 expression in the fibroblast co-culture was higher than the cardiomyocytes mono-culture and endothelial cells co-culture. In addition, fibroblast co-cultures demonstrated synchronized contractions involving large tissue-like cellular networks. To our knowledge, this is the first attempt to test chitosan nanofiber scaffolds as a 3-D cardiac co-culture model. Our results demonstrate that chitosan nanofibers can serve as a potential scaffold that can retain cardiac structure and function. These studies will provide useful information to develop a strategy that allows us to generate engineered 3-D cardiac tissue constructs using biocompatible and biodegradable chitosan nanofiber scaffolds for many tissue engineering applications.

Large-scale in-vitro expansion of RBCs from hematopoietic stem cells

The quest for RBCs in transfusion medicine has prompted scientists to explore the large-scale expansion of human RBCs from various sources. The successful production of RBCs in the laboratory depends on the selection of potential cell source, optimized culture, bio-physiological parameters, clinically applicable culture media that yields a scalable, contamination-free, non-reactive, non-tumorogenic, stable and functional end product. The expansion protocol considering the in vivo factors involved in homeostasis can generate a cost-effective and readily available cell source for transfusion. This review paper discusses several approaches used to expand RBCs from various sources of stem cells.

A non-rotational, computer-controlled suspension bioreactor for expansion of umbilical cord blood mononuclear cells

The proliferation and differentiation characteristics of umbilical cord blood mononuclear cells were examined in a non-rotational suspension bioreactor with a fishtail mixer. The system consisted of a glass vessel, a mixer that moved vertically, a data acquisition and control system to continuously monitor pH, temperature and dissolved O(2). The bioreactor provided superior expansion of total HSCs and not total cell number, as well as expression of stemness-related genes which followed with increasing in number of colony-forming cells during 14 days of culture compared to T -lask culture. Vertical agitation thus reduces the total cell number, which may be related to increased shear stress, but has no effect on HSC function.

Effect of the surface density of nanosegments immobilized on culture dishes on ex vivo expansion of hematopoietic stem and progenitor cells from umbilical cord blood

Umbilical cord blood (UCB) is an attractive source of hematopoietic stem and progenitor cells for hematopoietic stem cell (HSC) transplantation. However, the low number of HSCs obtainable from a single donor of UCB limits direct transplantation of UCB to the treatment of pediatric patients. In this study, we investigated the ex vivo expansion of HSCs cultured on biomaterials grafted with several nanosegments, i.e. polyamine, fibronectin, RGDS, and CS1 (EILDVPST), at several surface densities. No direct correlation was found between fold expansion of HSCs and physical parameters of the culture dishes, i.e. surface roughness and water contact angle of the culture dishes. However, a small amount of grafted amino groups, less than 0.8 residual μmol cm(-2), on the dishes was effective for the ex vivo expansion of HSCs. A high amount of grafted amino groups hindered the ex vivo expansion of HSCs on the dishes. HSCs cultured on dishes with a high concentration of CS1 (2.40 residual μmol cm(-2)) showed greater expansion of HSCs and more pluripotent colony-forming units (i.e. colony-forming unit-granulocyte, erythroid, macrophage, and megakaryocyte (CFU-GEMM)) than those on fibronectin-grafted and polyamine-grafted dishes. These data suggest that the specific interaction between HSCs and CS1 helps to maintain the pluripotency of HSCs during the ex vivo expansion of HSCs.

Systematic investigation of oxygen and growth factors in clinically valid ex vivo expansion of cord blood CD34(+) hematopoietic progenitor cells

BACKGROUND AIMS

Cord blood is considered to be a superior source of hematopoietic stem and progenitor cells for transplantation, but clinical use is limited primarily because of the low numbers of cells harvested. Ex vivo expansion has the potential to provide a safe, effective means of increasing cell numbers. However, an absence of consensus regarding optimum expansion conditions prevents standard implementation. Many studies lack clinical applicability, or have failed to investigate the combinational effects of different parameters.

METHODS

This is the first study to characterize systematically the effect of growth factor combinations across multiple oxygen levels on the ex vivo expansion of cord blood CD34(+) hematopoietic cells utilizing clinically approvable reagents and methodologies throughout.

RESULTS

Optimal fold expansion, as assessed both phenotypically and functionally, was greatest with thrombopoietin, stem cell factor, Flt-3 ligand and interleukin-6 at an oxygen level of 10%. With these conditions, serial expansion showed continual target population expansion and consistently higher expression levels of self-renewal associated genes.

CONCLUSIONS

This study has identified optimized fold expansion conditions, with the potential for direct clinical translation to increase transplantable cell dose and as a baseline methodology against which future factors can be tested.

Matrix components and scaffolds for sustained islet function

The clinical treatment of diabetes by islet transplantation is limited by low islet survival rates. A fundamental reason for this inefficiency is likely due to the removal of islets from their native environment. The isolation process not only disrupts interactions between blood vessels and endocrine cells, but also dramatically changes islet cell interaction with the extracellular matrix (ECM). Biomolecular cues from the ECM are important for islet survival, proliferation, and function; however, very little is known about the composition of islet ECM and the role each component plays. Without a thorough understanding of islet ECM, current endeavors to prolong islet survival via scaffold engineering lack a systematic basis. The following article reviews current knowledge of islet ECM and attempts to explain the roles they play in islet function. In addition, the effects of in vitro simulations of the native islet scaffold will be evaluated. Greater understanding in these areas will provide a preliminary platform from which a sustainable bioartificial pancreas may be developed.

Expansion of human mesenchymal stem cells in a fixed-bed bioreactor system based on non-porous glass carrier--part A: inoculation, cultivation, and cell harvest procedures

Human mesenchymal stem cells (hMSC) are a promising cell source for several applications of regenerative medicine. The cells employed are either autologous or allogenic; by using stem cell lines in particular, allogenic cells enable the production of therapeutic cell implants or tissue engineered implants in stock. For these purposes, the generally small initial cell number has to be increased; this requires the use of bioreactors, which offer controlled expansion of the hMSC under GMP-conform conditions. In this study, divided into part A and B, a fixed bed bioreactor system based on non-porous borosilicate glass spheres for the expansion of hMSC, demonstrated with the model cell line hMSC-TERT, is introduced. The system offers convenient automation of the inoculation, cultivation, and harvesting procedures. Furthermore, the bioreactor has a simple design which favors its manufacturing as a disposable unit. Part A is focused on the inoculation, cultivation, and harvesting procedures. Cultivations were performed in lab scales up to a bed volume of 300 cm³. The study showed that the fixed bed system, based on 2-mm borosilicate glass spheres, as well as the inoculation, cultivation, and harvesting procedures are suitable for the expansion of hMSC with high yield and vitality.

Covalently immobilized glycosaminoglycans enhance megakaryocyte progenitor expansion and platelet release

Application of umbilical cord blood (UCB) transplantation in adults as a treatment post-chemotherapy is hampered due to delayed platelet recovery. A potential solution suggested is the transfusion of ex vivo expanded megakaryocytes (Mks) from hematopoietic stem cells (HSCs). Alternatively, large-scale production of platelets in vitro has also been attempted with the goal of transfusing them into patients with thrombocytopenia. Glycosaminoglycans (GAGs) have been shown to influence the proliferation and differentiation of HSCs. This study sought to examine the effects of immobilized GAGs on the expansion, apoptosis, and platelet release activity of CD41a+ Mk progenitors in vitro. Freshly isolated HSCs from UCB were cultured in serum-free media supplemented with thrombopoietin on GAG-derivatized chitosan membranes for 17 days. Controls consisted of uncoated and chitosan-coated wells. Wells were demidepopulated at periodic intervals and analyzed by flow cytometry. Heparin and dermatan sulfate surfaces significantly enhanced total cell and Mk cell expansion (p < 0.05) compared to both the controls. The apoptotic Mk fraction was significantly lower on GAG surfaces (p < 0.05) compared to the polystyrene control during the early stages of the culture (days 7 and 11). However, by day 17, the apoptotic Mk fraction was comparable on all surfaces. The cumulative number of platelets generated on dermatan sulfate and heparan sulfate surfaces was significantly higher (p < 0.05) than on both the controls. These results suggest that immobilized GAGs delay Mk apoptosis and thereby enhance Mk expansion and platelet production.

Effects of immobilized glycosaminoglycans on the proliferation and differentiation of mesenchymal stem cells

Mesenchymal stem cells (MSCs) are adult stem cells with potential for multilineage differentiation. They represent an attractive cell source alternative to embryonic stem cells for therapeutic applications. Optimal utilization of MSCs for tissue engineering requires improved biomaterials that can enhance their growth and direct differentiation. The biological activity of glycosaminoglycans (GAGs) has been previously exploited for use in tissue engineering applications. In this study, MSC proliferation and differentiation was studied on GAG-derivatized chitosan membranes. The GAGs included heparin, heparan sulfate, dermatan sulfate, chondroitin 4-sulfate, chondroitin 6-sulfate, and hyaluronic acid. The covalent GAG immobilization method and amount of immobilized GAG were varied. It was found that MSC growth increased as much as fivefold on GAG-immobilized surfaces compared to tissue culture plastic and chitosan-only controls. The MSC growth rates increased significantly with increasing GAG density on the culture surfaces. The MSC proliferation rates on heparin, heparan sulfate, dermatan sulfate, and chondroitin 6-sulfate exhibited nonlinear increases with the level of fibronectin binding on these surfaces. In contrast, MSC proliferation on hyaluronic acid and chondroitin 4-sulfate was found to be independent of fibronectin or vitronectin binding on the surfaces, suggesting that these GAGs influenced MSC proliferation through different mechanisms. In conclusion, the results indicate that GAG immobilization on chitosan scaffolds provides an effective means of manipulating MSC proliferation and has promising potential for directing MSC differentiation in tissue engineering applications employing chitosan.