Instability of self-assembled monolayers as a model material system for macrophage/FBGC cellular behavior

Optimization of the immunorecognition layer towards Brucella sp. on gold surface for SPR platform

A successful immunosensor is characterized by a proper antibody immobilization and orientation in order to enhance the antigen recognition. In this work, a thorough characterization of the antibody functionalized gold surface is performed to set up the best conditions to implement in an optical platform for the detection of Brucella sp. Two different strategies are evaluated, based on a random immobilization and on an oriented one: a direct antibody immobilization on carboxylic mixed polyethylene (PEG) self-assembled monolayer (SAM) or only carboxylic PEG SAM interface is compared to an oriented immobilization on a layer of protein G on the same PEG SAM interfaces. X-ray Photoelectron Spectroscopy (XPS), Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS) and contact angle (CA) are used to chemically characterize the gold functionalized surface and ToF-SIMS is also used to confirm the right antibody orientation. Optical characterization is applied to monitor the functionalization steps and fluorescence measurements are used to set up the proper experimental conditions and also to detect Brucella bacteria on the surface. Best results are obtained with a 10 ng/μl incubation solution of antibody immobilized, in an oriented way, on a mixed PEG SAM interface.

Surface Modification of PHBV Fibrous Scaffold via Lithium Borohydride Reduction

In this study, lithium borohydride (LiBH₄) reduction was used to modify the surface chemistry of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) fibers. Although the most common reaction employed in the surface treatment of polyester materials is hydrolysis, it is not suitable for fiber modification of bacterial polyesters, which are highly resistant to this type of reaction. The use of LiBH₄ allowed the formation of surface hydroxyl groups under very mild conditions, which was crucial for maintaining the fibers' integrity. The presence of these groups resulted in a noticeable improvement in the surface hydrophilicity of PHBV, as revealed by contact angle measurements. After the treatment with a LiBH₄ solution, the electrospun PHBV fibrous mat had a significantly greater number of viable osteoblast-like cells (SaOS-2 cell line) than the untreated mat. Moreover, the results of the cell proliferation measurements correlated well with the observed cell morphology. The most flattened SaOS-2 cells were found on the surface that supported the best cell attachment. Most importantly, the results of our study indicated that the degree of surface modification could be controlled by changing the degradation time and concentration of the borohydride solution. This was of great importance since it allowed optimization of the surface properties to achieve the highest cell-proliferation capacity.

Wafer-Scale LSPR Substrate: Oblique Deposition of Gold on a Patterned Sapphire Substrate

Label-free detection of biomolecules using localized surface plasmon resonance (LSPR) substrates is a highly attractive method for point-of-care (POC) testing. One of the remaining challenges to developing LSPR-based POC devices is to fabricate the LSPR substrates with large-scale, reproducible, and high-throughput. Herein, a fabrication strategy for wafer-scale LSPR substrates is demonstrated using reproducible, high-throughput techniques, such as nanoimprint lithography, wet-etching, and thin film deposition. A transparent sapphire wafer, on which SiO₂-nanodot hard masks were formed via nanoimprint lithography, was anisotropically etched by a mixed solution of H₂SO₄ and H₃PO₄, resulting in a patterned sapphire substrate (PSS). An LSPR substrate was finally fabricated by oblique deposition of Au onto the PSS, which was then applied to label-free detection of the binding events of biomolecules. To the best of our knowledge, this paper is the first report on the application of the PSS used as an LSPR template by obliquely depositing a metal.

Interaction of synthetic and lignin-based sulfonated polymers with hydrophilic, hydrophobic, and charged self-assembled monolayers

There is a need to understand the role of polymer structure on its interaction with surfaces to produce effective functional surfaces. In this work, we produced two anionic polymers of lignin-3-sulfopropyl methacrylate (L-S) and poly(vinyl alcohol-co-vinyl acetate)-3-sulfopropyl methacrylate (PVA-S) with similar charge densities and molecular weights. On the gold-coated surface, we deposited self-assembled monolayers (SAM) bearing different terminal moieties namely, hydroxyl, carboxyl, methyl, and amine groups of alkanethiols. This study highlighted the difference between the interaction of L-S and PVA-S and functionalized self-assembled surfaces. The information was generated using advanced tools, such as an X-ray photoelectron spectroscopy (XPS), and a quartz crystal microbalance with dissipation (QCM-D), which facilitated the correlation development between polymer properties and deposition performance on the functionalized surfaces. The higher deposition of PVA-S than L-S onto OH and COOH surfaces was observed due to its greater hydrogen bonding development and higher solubility. The solubility and structure of PVA-S were also beneficial for its higher adsorption than L-S onto CH₃ and NH₂ surfaces. However, the variation in pH, temperature, and salt significantly affected the adsorption of the macromolecules.

The interaction mechanism of synthetic and lignin based sulfonated materials with well-designed functional surfaces was investigated systematically.

Inflammation via myeloid differentiation primary response gene 88 signaling mediates the fibrotic response to implantable synthetic poly(ethylene glycol) hydrogels

Synthetic hydrogels, such as poly(ethylene glycol) (PEG), are promising for a range of in vivo applications. However, like all non-biological biomaterials, synthetic hydrogels including PEG elicit a foreign body response (FBR). The FBR is thought to be initiated by adsorbed protein that is recognized by and subsequently activates inflammatory cells, notably macrophages, and culminates with fibrotic encapsulation. However, the molecular mechanisms that drive the FBR are not well understood. Toll-like receptors (TLRs) are key receptors that recognize pathogens, but also recognize altered host proteins that display damage-associated molecular patterns (DAMPs). Thus TLRs may play a role in the FBR. Here, we investigated myeloid differentiation primary response gene 88 (MyD88), a signaling adaptor protein that mediates inflammatory cytokine production induced by most TLRs. An in vitro model was used consisting of macrophages cultured on the surface of synthetic hydrogels, specifically PEG, with pre-adsorbed serum proteins. Our in vitro findings demonstrate that MyD88-dependent signaling is the predominant inflammatory pathway in macrophage activation to synthetic hydrogels. When stimulated with TLR agonists to mimic additional DAMPs present in vivo, MyD88-dependent signaling was also the predominant pathway in macrophage activation. An in vivo model of PEG hydrogels implanted subcutaneously in wild-type and MyD88^-/- mice also demonstrated that MyD88 is the key contributor to the recruitment of inflammatory cells and formation of the fibrous capsule surrounding the implanted hydrogel. Taken together, findings from this study identify MyD88-mediated inflammation as being a critical pathway involved not only in the inflammatory response, but in formation of the fibrous capsule to PEG hydrogels. STATEMENT OF SIGNIFICANCE: Synthetic hydrogels are promising for in vivo applications but, like all non-biological biomaterials, synthetic hydrogels elicit a foreign body response (FBR). The molecular mechanisms that drive the FBR are not well understood. This work identifies the myeloid differentiation primary response gene 88 (MyD88) as a central mediator to macrophage activation in response to a poly(ethylene glycol) hydrogel with pre-adsorbed proteins in vitro. Moreover, MyD88 was also central to the recruitment of inflammatory cells, which included neutrophils, monocytes, and macrophages, to implanted PEG hydrogels and to fibrous encapsulation. These findings demonstrate that MyD88-mediated inflammation is responsible in part for the formation of the fibrous capsule of the FBR.

Modification of Nanoporous Silicon Nitride with Stable and Functional Organic Monolayers

This study describes the formation of functional organic monolayers on thin, nanoporous silicon nitride membranes. We demonstrate that the vapor-phase carbene insertion into the surface C-H bonds can be used to form sub-5 nm molecular coatings on nanoporous materials, which can be further modified with monolayers of polyethylene glycol (PEG) molecules. We investigate composition, thickness, and stability of the functionalized monolayers and the changes in the membrane permeability and pore size distribution. We show that, due to the low coating thickness (~7 nm), the functionalized membrane retains 80% of the original gas permeance and 40% of the original hydraulic permeability. We also show that the carbene/PEG functionalization is hydrolytically stable for up to 48 h of exposure to water and that it can suppress nonspecific adsorption of the proteins BSA and IgG. Our results suggest that the vapor-phase carbenylation can be used as a complementary technology to the traditional self-assembly and polymer brush chemistries in chemical functionalization of nanoporous materials, which are limited in their ability to serve as stable coatings that do not occlude nanomembrane pores.

Pendant small functional groups on poly(ϵ-caprolactone) substrate modulate adhesion, proliferation and differentiation of human mesenchymal stem cells

Probing stem cell-biomaterial interactions is of great significance in both gaining profound understanding of stem cell biology and advancing tissue regeneration. In the present work, we developed a series of poly(ϵ-caprolactone) (PCL) films bearing distinct pendant small functional groups to study the effects of biomaterial substrate chemistry on stem cell behaviors. PCL films, bearing hydroxyl (OH), methyl (CH₃), carboxyl (COOH) and amino (NH₂), demonstrated varied surface properties, such as wettability, serum protein adsorption and surface topographical feature. In comparison with pristine PCL film, the adhesion of hMSCs on PCL-COOH, PCL-OH and PCLCO films was significantly promoted and cells slightly outgrew on PCL-NH₂ and PCL-COOH films. Most importantly, the tri-lineage differentiation of hMSCs varied on this series of PCL films, with the best osteogenesis achieved on PCL-NH₂ film, PCL and PCL-CH₃ films supporting the superior adipogenic differentiation and PCL-CH₃ film being the most favorable one for chondrogenesis. This study highlights the critical roles of surface chemistry in modulating the fates of MSCs and potentially provides a practical guidance in developing instructive tissue engineering scaffolds.

In vitro assessment of macrophage attachment and phenotype on polymerized phospholipid bilayers

Phosphatidyl choline (PC)-based materials have been found to be resistant to nonspecific protein adhesion in vitro. In this study, a PC-based planar supported phospholipid bilayer composed of 1,2-bis[10-(2',4'-hexadienoyloxy)decanoyl]-sn-glycero-3-phosphocholine (bis-SorbPC or BSPC) was generated on piranha-treated silicon wafers by vesicle deposition. The bilayer was polymerized with redox initiation forming a stable 4-nm thick coating. Polymerized lipid bilayers (PLBs) were characterized and tested for uniformity, with ellipsometry and contact angle. Cellular adhesion and morphological changes in RAW 264.7 macrophages were investigated in vitro on PLBs and compared to bare silicon controls. Fluorescent and scanning electron microscopy were used to observe changes in cellular morphology. The PLBs showed much lower cellular adhesion than bare silicon controls. Of the cells that attached to the PLBs, a very low percentage showed the same morphological expressions seen on the controls. It is hypothesized that proteins adsorb to the defects in the PLBs, caused by incomplete polymerization, and this mediates the observed minimal cellular attachment and morphological changes. © 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part A: , 2011.

The stability of self-assembled monolayers with time and under biological conditions

The stability of self-assembled monolayers (SAMs) of different functionalities (CH(3)-, OH-, and EG4-) over time under appropriate storage conditions and when immersed in cell culture media was evaluated. X-ray photoelectron spectroscopy (XPS) was used to detect the oxidized sulfur species (S(2p) binding energy from 167 to 168 eV) resulting from oxidation of the surfaces. CH(3)-terminated SAMs stored for a period of 9 weeks in a nitrogen chamber were not altered. The same did not happen with OH- and EG4-SAMs, for which the XPS spectra evidenced oxidized peaks after 2 weeks. Regarding the stability of these surfaces under biological conditions, 30 min of immersion at 37 degrees C in serum-free or 10% fetal bovine serum (FBS) supplemented medium did not induce detectable oxidation. However, a small percentage of oxidized sulfur could have been washed out by the media, as confirmed in studies using SAMs immersed in water. Despite the possible rinsing out of oxidized thiols, high amounts of oxidation can still be detected by XPS. SAMs degradation during ethanol sterilization was not detectable by XPS, although a small increase on the wettability of OH-SAMs was observed. The data suggest that SAMs must be used freshly prepared, being recommended for short-term biological studies.

Macrophage and dendritic cell phenotypic diversity in the context of biomaterials

Macrophages (Mϕ) and dendritic cells (DCs) are critical antigen presenting cells that play pivotal roles in host responses to biomaterial implants. Although Mϕs have been widely studied for their roles in the inflammatory responses against biomaterials, the roles that DCs play in the host responses toward implanted materials have only recently been explored. DCs are of significant research interest because of the emergence of a large number of combination products that cross-traditional medical device boundaries. These products combine biomaterials with biologics, including cells, nucleic acids, and/or proteins. The biomaterial component may evoke an inflammatory response, primarily mediated by neutrophils and Mϕs, whereas the biologic component may elicit an immunogenic immune response, initiated by DCs involving lymphocyte activation. Control of Mϕ phenotypic balance from proinflammatory M1 to reparative M2 is a goal of investigators to optimize the host response to biomaterials. Similarly, control of DC phenotype from proinflammatory to toleragenic is of interest in vaccine delivery and tissue engineering/transplantation situations, respectively. This review discusses the interconnection between innate and adaptive immunity, the comparative and contrasting phenotypes and roles of Mϕs and DCs in immunity, their responses to biomaterials and the strategies to modulate their phenotype for applications in tissue engineering and vaccine delivery. Furthermore, the collaboration between and unique roles of DCs and Mϕs needs to be addressed in future studies to gain a more complete picture of host responses toward combination products.

Characterization of topographical effects on macrophage behavior in a foreign body response model

Current strategies to limit macrophage adhesion, fusion and fibrous capsule formation in the foreign body response have focused on modulating material surface properties. We hypothesize that topography close to biological scale, in the micron and nanometric range, provides a passive approach without bioactive agents to modulate macrophage behavior. In our study, topography-induced changes in macrophage behavior was examined using parallel gratings (250 nm-2 mum line width) imprinted on poly(epsilon-caprolactone) (PCL), poly(lactic acid) (PLA) and poly(dimethyl siloxane) (PDMS). RAW 264.7 cell adhesion and elongation occurred maximally on 500 nm gratings compared to planar controls over 48 h. TNF-alpha and VEGF secretion levels by RAW 264.7 cells showed greatest sensitivity to topographical effects, with reduced levels observed on larger grating sizes at 48 h. In vivo studies at 21 days showed reduced macrophage adhesion density and degree of high cell fusion on 2 mum gratings compared to planar controls. It was concluded that topography affects macrophage behavior in the foreign body response on all polymer surfaces examined. Topography-induced changes, independent of surface chemistry, did not reveal distinctive patterns but do affect cell morphology and cytokine secretion in vitro, and cell adhesion in vivo particularly on larger size topography compared to planar controls.

Human mesenchymal stem cell differentiation on self-assembled monolayers presenting different surface chemistries

Human mesenchymal stem cells (hMSCs) have tremendous potential as a cell source for regenerative medicine due to their capacity for differentiation into a wide range of connective tissue cell types. Although significant progress has been made in the identification of defined growth factor conditions to induce lineage commitment, the effect of underlying biomaterial properties on functional differentiation is far less understood. Here we conduct a systematic assessment of the role for surface chemistry on cell growth, morphology, gene expression and function during hMSC commitment along osteogenic, chondrogenic and adipogenic lineages. Using self-assembled monolayers of omega-functionalized alkanethiols on gold as model substrates, we demonstrate that biomaterial surface chemistry differentially modulates hMSC differentiation in a lineage-dependent manner. These results highlight the importance of initial biomaterial surface chemistry on long-term functional differentiation of adult stem cells, and suggest that surface properties are a critical parameter that must be considered in the design of biomaterials for stem cell-based regenerative medicine strategies.