Effects of mechanical stimuli on the synthesis of superficial zone protein in chondrocytes

High-Frequency Near-Infrared Diode Laser Irradiation Attenuates IL-1β-Induced Expression of Inflammatory Cytokines and Matrix Metalloproteinases in Human Primary Chondrocytes

High-frequency near-infrared diode laser provides a high-peak output, low-heat accumulation, and efficient biostimulation. Although these characteristics are considered suitable for osteoarthritis (OA) treatment, the effect of high-frequency near-infrared diode laser irradiation in in vitro or in vivo OA models has not yet been reported. Therefore, we aimed to assess the biological effects of high-frequency near-infrared diode laser irradiation on IL-1β-induced chondrocyte inflammation in an in vitro OA model. Normal Human Articular Chondrocyte-Knee (NHAC-Kn) cells were stimulated with human recombinant IL-1β and irradiated with a high-frequency near-infrared diode laser (910 nm, 4 or 8 J/cm²). The mRNA and protein expression of relevant inflammation- and cartilage destruction-related proteins was analyzed. Interleukin (IL) -1β treatment significantly increased the mRNA levels of IL-1β, IL-6, tumor necrosis factor (TNF) -α, matrix metalloproteinases (MMP) -1, MMP-3, and MMP-13. High-frequency near-infrared diode laser irradiation significantly reduced the IL-1β-induced expression of IL-1β, IL-6, TNF-α, MMP-1, and MMP-3. Similarly, high-frequency near-infrared diode laser irradiation decreased the IL-1β-induced increase in protein expression and secreted levels of MMP-1 and MMP-3. These results highlight the therapeutic potential of high-frequency near-infrared diode laser irradiation in OA.

Shear bioreactors stimulating chondrocyte regeneration, a systematic review

It is commonly accepted that the mechanical stimuli are important factors in the maintenance of normal structure and function of the articular cartilage. Despite extensive efforts, the cellular mechanisms underlying the responses of articular chondrocytes to mechanical stresses are not well understood. In the present review, different types of shear bioreactor and potential mechanisms that mediate and regulate the effect of shear on chondrocyte are discussed.

For this review, the search of the literature was done in the PubMed, Scopus, Web of sciences databases to identify papers reporting data about shear on chondrocyte. Keywords “shear, chondrocyte, cartilage, bioreactor” were used. Studies published until the first of March 2018 were considered in this paper. The review focused on the experimental studies conducted the effect of shear stress on cartilage tissue in vivo and in vitro. In this review, both experimental studies referring to human and animal tissues were taken into account. The following articles were excluded: reviews, meta-analysis, duplicate records, letters, and papers that did not add significant information. Mechanism of shear stress on chondrocyte, briefly can be hypothesized as (1) altered expression of aggrecan and collagen type II, (2) altered cartilage oligomeric matrix protein (COMP) serum levels, consequently, organizing the arrangement binding of glycosaminoglycans, integrins, and collagen, (3) induction of apoptosis signals, (4) altered expression of integrin.

Functionally graded multilayer scaffolds for in vivo osteochondral tissue engineering

Osteochondral tissue repair remains a significant challenge in orthopedic surgery. Tissue engineering of osteochondral tissue has transpired as a potential therapeutic solution as it can effectively regenerate bone, cartilage, and the bone-cartilage interface. While advancements in scaffold fabrication and stem cell engineering have made significant progress towards the engineering of composite tissues, such as osteochondral tissue, new approaches are required to improve the outcome of such strategies. Herein, we discuss the use of a single-unit trilayer scaffold with depth-varying pore architecture and mineral environment to engineer osteochondral tissues in vivo. The trilayer scaffold includes a biomineralized bottom layer mimicking the calcium phosphate (CaP)-rich bone microenvironment, a cryogel middle layer with anisotropic pore architecture, and a hydrogel top layer. The mineralized bottom layer was designed to support bone formation, while the macroporous middle layer and hydrogel top layer were designed to support cartilage tissue formation. The bottom layer was kept acellular and the top two layers were loaded with cells prior to implantation. When implanted in vivo, these trilayer scaffolds resulted in the formation of osteochondral tissue with a lubricin-rich cartilage surface. The osteochondral tissue formation was a result of continuous differentiation of the transplanted cells to form cartilage tissue and recruitment of endogenous cells through the mineralized bottom layer to form bone tissue. Our results suggest that integrating exogenous cell-based cartilage tissue engineering along with scaffold-driven in situ bone tissue engineering could be a powerful approach to engineer analogs of osteochondral tissue. In addition to offering new therapeutic opportunities, such approaches and systems could also advance our fundamental understanding of osteochondral tissue regeneration and repair.

STATEMENT OF SIGNIFICANCE

In this work, we describe the use of a single-unit trilayer scaffold with depth-varying pore architecture and mineral environment to engineer osteochondral tissues in vivo. The trilayer scaffold was designed to support continued differentiation of the donor cells to form cartilage tissue while supporting bone formation through recruitment of endogenous cells. When implanted in vivo, these trilayer scaffolds partially loaded with cells resulted in the formation of osteochondral tissue with a lubricin-rich cartilage surface. Approaches such as the one presented here that integrates ex vivo tissue engineering along with endogenous cell-mediated tissue engineering can have a significant impact in tissue engineering composite tissues with diverse cell populations and functionality.

Regulation of lubricin for functional cartilage tissue regeneration: a review

Background

Lubricin is chondrocyte-secreted glycoprotein that primarily conducts boundary lubrication between joint surfaces. Besides its cytoprotective function and extracellular matrix (ECM) attachment, lubricin is recommended as a novel biotherapeutic protein that restore functional articular cartilage. Likewise, malfunction of lubrication in damaged articular cartilage caused by complex and multifaceted matter is a major concern in the field of cartilage tissue engineering.

Main body

Although a noticeable progress has been made toward cartilage tissue regeneration through numerous approaches such as autologous chondrocyte implantation, osteochondral grafts, and microfracture technique, the functionality of engineered cartilage is a challenge for complete reconstruction of cartilage. Thus, delicate modulation of lubricin along with cell/scaffold application will expand the research on cartilage tissue engineering.

Conclusion

In this review, we will discuss the empirical analysis of lubricin from fundamental interpretation to the practical design of gene expression regulation.

Effect of mechanical loading on the metabolic activity of cells in the temporomandibular joint: a systematic review

OBJECTIVES

The purpose of this systematic review was to elucidate how different modalities and intensities of mechanical loading affect the metabolic activity of cells within the fibro-cartilage of the temporomandibular joint (TMJ).

MATERIALS AND METHODS

A systematic review was conducted according to PRISMA guidelines using PubMed, Embase, and Web of Science databases. The articles were selected following a priori formulated inclusion criteria (viz., in vivo and in vitro studies, mechanical loading experiments on TMJ, and the response of the TMJ). A total of 254 records were identified. After removal of duplicates, 234 records were screened by assessing eligibility criteria for inclusion. Forty-nine articles were selected for full-text assessment. Of those, 23 were excluded because they presented high risk of bias or were reviews. Twenty-six experimental studies were included in this systematic review: 15 in vivo studies and 11 in vitro ones.

CONCLUSION

The studies showed that dynamic mechanical loading is an important stimulus for mandibular growth and for the homeostasis of TMJ cartilage. When this loading is applied at a low intensity, it prevents breakdown of inflamed cartilage. Yet, frequent overloading at excessive levels induces accelerated cell death and an increased cartilage degradation.

CLINICAL SIGNIFICANCE

Knowledge about the way temporomandibular joint (TMJ) fibrocartilage responds to different types and intensities of mechanical loading is important to improve existing treatment protocols of degenerative joint disease of the TMJ, and also to better understand the regenerative pathway of this particular type of cartilage.

Pleiotropic Functions of High Fat Diet in the Etiology of Osteoarthritis

Obesity is a risk factor for osteoarthritis (OA). To investigate the roles of increased mechanical loading in the onset of obesity-induced OA, knee joints were histologically analyzed after applying a tail suspension (TS) model to a high-fat diet (HFD)-induced OA model. Mice were divided into four groups: normal diet (ND) with normal loading (NL) group; HFD with NL group; ND with TS group; and HFD with TS group. Whole knee joints were evaluated by immunohistological analysis. The infrapatellar fat pad (IPFP) was excised and mRNA expression profiles were compared by qPCR analysis. After twelve weeks of the diet, body weight was increased by HFD in both the NL group and TS group. Upon histological analysis, the irregularity of the surface layer of articular cartilage was observed only in the NL+HFD group. Osteophyte area increased as a result of HFD in both the NL and TS groups, although osteophyte area in the TS+HFD group was smaller than that of the NL+HFD group. In the evaluation of the IPFP by qPCR, adipokines and inflammatory cytokines also increased as a result of HFD. While TGF-β increased as a result of HFD, the trend was slightly lower in the TS group, in parallel with osteophyte area. To detect apoptosis of articular chondrocytes, TUNEL staining was employed. TUNEL-positive cells were abundantly observed in the articular cartilage in the HFD mice regardless of mechanical loading. IPFP inflammation, enhanced chondrocyte apoptosis, and osteophyte formation were seen even in the TS group as a result of a HFD. In all, these data demonstrate that HFD contributed to osteophyte formation through mechanical loading dependent and independent mechanisms.

Effects of cyclic tensile strain on chondrocyte metabolism: a systematic review

Chondrocytes reorganize the extracellular matrix of articular cartilage in response to externally applied loads. Thereby, different loading characteristics lead to different biological responses. Despite of active research in this area, it is still unclear which parts of the extracellular matrix adapt in what ways, and how specific loading characteristics affect matrix changes. This review focuses on the influence of cyclic tensile strain on chondrocyte metabolism in vitro. It also aimed to identify anabolic or catabolic chondrocyte responses to different loading protocols. The key findings show that loading cells up to 3% strain, 0.17 Hz, and 2 h, resulted in weak or no biological responses. Loading between 3–10% strain, 0.17–0.5 Hz, and 2–12 h led to anabolic responses; and above 10% strain, 0.5 Hz, and 12 h catabolic events predominated. However, this review also discusses that various other factors are involved in the remodeling of the extracellular matrix in response to loading, and that parameters like an inflammatory environment might influence the biological response.

Engineering lubrication in articular cartilage

Despite continuous progress toward tissue engineering of functional articular cartilage, significant challenges still remain. Advances in morphogens, stem cells, and scaffolds have resulted in enhancement of the bulk mechanical properties of engineered constructs, but little attention has been paid to the surface mechanical properties. In the near future, engineered tissues will be able to withstand and support the physiological compressive and tensile forces in weight-bearing synovial joints such as the knee. However, there is an increasing realization that these tissue-engineered cartilage constructs will fail without the optimal frictional and wear properties present in native articular cartilage. These characteristics are critical to smooth, pain-free joint articulation and a long-lasting, durable cartilage surface. To achieve optimal tribological properties, engineered cartilage therapies will need to incorporate approaches and methods for functional lubrication. Steady progress in cartilage lubrication in native tissues has pushed the pendulum and warranted a shift in the articular cartilage tissue-engineering paradigm. Engineered tissues should be designed and developed to possess both tribological and mechanical properties mirroring natural cartilage. In this article, an overview of the biology and engineering of articular cartilage structure and cartilage lubrication will be presented. Salient progress in lubrication treatments such as tribosupplementation, pharmacological, and cell-based therapies will be covered. Finally, frictional assays such as the pin-on-disk tribometer will be addressed. Knowledge related to the elements of cartilage lubrication has progressed and, thus, an opportune moment is provided to leverage these advances at a critical step in the development of mechanically and tribologically robust, biomimetic tissue-engineered cartilage. This article is intended to serve as the first stepping stone toward future studies in functional tissue engineering of articular cartilage that begins to explore and incorporate methods of lubrication.

Modulation of hyaluronan catabolism in chondrocytes by mechanical stimuli

Hyaluronan (HA) is a component of the extracellular matrices of cartilage contributing to the structural and functional integrity. HA metabolism is regulated by both anabolic and catabolic processes; however, a great deal more of the detail has been unknown yet. The purpose of this study was to clarify the effect of excessive mechanical load on the expression and activity of hyaluronidase (HYAL) in chondrocytes with a special reference to the expressions of IL-1beta and tumor necrosis factor (TNF)-alpha. A cyclic tensile load of 22.8% cell elongation, regarded as an excessive mechanical stimulus, was applied to cultured rabbit knee articular chondrocytes. HYAL1, HYAL2, IL-1beta, and TNF-alpha mRNA levels were examined by quantitative real-time PCR analysis. The HYAL activity in culture medium was examined by HA zymography. Both HYAL1 and HYAL2 mRNA levels were upregulated significantly by the loading in cultured chondrocytes. HYAL activity was also enhanced as compared with unloaded controls. The IL-1beta mRNA level was upregulated significantly by the loading, and TNF-alpha mRNA level was slightly upregulated. HYAL1 and HYAL2 mRNA levels were upregulated significantly by IL-1beta treatment, resulting in a slight increase in HYAL activity. These results show that the expression of HYAL1 and HYAL2 in articular chondrocytes is enhanced by excessive mechanical stimuli and affected in part by induction of IL-1beta, leading to HA catabolism in articular cartilage.